Matronics Email Lists :: View topic - Europa Mono, 912 S, Increasing oil Cooling

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Europa Mono, 912 S, Increasing oil Cooling

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

jrgowing(at)bigpond.net.a
Guest

Posted: Sat Apr 18, 2009 8:17 pm Post subject: Europa Mono, 912 S, Increasing oil Cooling

For those who have lowered the cooler into the  cooling duct - what BSP (British Standard Pipe) fittings did you use  please-could you do it with one or a series of pipe fittings on the in and out  flow to cooler?

  

 JR (Bob) Gowing  UK Kit 327 in  Oz

 [quote]   ---

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

g-iani(at)ntlworld.com
Guest

Posted: Sun Apr 19, 2009 3:06 am Post subject: Europa Mono, 912 S, Increasing oil Cooling

Bob

  

 If you lower the cooler the only pipe fitting you need to  change is the right angled connector.  This is changed for a straight  connector identical to the other end of the cooler.  Europa has the  fittings.  Most builders find the pipe work is long enough and does not  need to be replaced.

  

  

Ian Rickard G-IANI XS Trigear, 200 hours

Europa Club Mods Rep  (Trigear)

e-mail mods(at)europaclub.org.uk  

   or direct  g-iani(at)ntlworld.com 

[quote] [b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

jrgowing(at)bigpond.net.a
Guest

Posted: Sun Apr 19, 2009 5:44 pm Post subject: Europa Mono, 912 S, Increasing oil Cooling

Thank you Ian

  

 I had been trying to keep the connection out of the  duct but that may not have been the best idea.

 I am pleased to know I can exchange the bent  connection for a straight one and will probably end up doing that - for  cheapest approach at least!

  

 Best Wishes

 JR (Bob) Gowing in Oz

  

 do not archive

  

 ---

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum