Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

HD/HDS cable specs

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

jeffrey_davidson(at)earth
Guest

Posted: Sat Apr 18, 2009 4:56 am Post subject: HD/HDS cable specs

Roger,  

      Edition 3 dated Jan. 1995 of the CH 601 (HD) Construction Manual gives the cables tension as "30 to 40 lbs." on page 29.  Since the HDS plans were an addendum to this manual, I presume the same tension applies to the HDS.  As far as I know, the cable runs were exactly the same for the HDS as for the HD.  

      Jeff Davidson  

   

Howdy all;  

   

I have my annual inspection on Saturday, and for the life of me I can't find  

the 601 HDS cable tension specs. Does anyone know what the elevator and  

rudder cables should be tension to on a 601 hds?  

   

Thanks  

   

Roger  

       [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

hills(at)sunflower.com
Guest

Posted: Sat Apr 18, 2009 3:20 pm Post subject: HD/HDS cable specs

Jeff;  

   

Thanks for the info. I set mine to 35 lbs today during the annual (the elevator was at 17 lbs when I first check it).   

I even bought a cable tester off my A&P for $130.  

I figure I will check the cables every 3 months, just to be safe. Anyway, it’s easy to do.  

   

Thanks again  

   

Roger  

   

         

  

From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Jeff 

 Sent: Saturday, April 18, 2009 7:56 AM

 To: zenith-list(at)matronics.com; zenith601-list(at)matronics.com

 Subject: HD/HDS cable specs  

  

   

Roger,  

      Edition 3 dated Jan. 1995 of the CH 601 (HD) Construction Manual gives the cables tension as "30 to 40 lbs." on page 29.  Since the HDS plans were an addendum to this manual, I presume the same tension applies to the HDS.  As far as I know, the cable runs were exactly the same for the HDS as for the HD.  

      Jeff Davidson  

   

Howdy all;  

   

I have my annual inspection on Saturday, and for the life of me I can't find  

the 601 HDS cable tension specs. Does anyone know what the elevator and  

rudder cables should be tension to on a 601 hds?  

   

Thanks  

   

Roger   	  Quote: 	
		    http://www.matronics.com/Navigator?Zenith-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

        [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

craig(at)craigandjean.com
Guest

Posted: Sat Apr 18, 2009 4:07 pm Post subject: HD/HDS cable specs

BTW: Aircraft Tool Supply is having a sale. The Burroughs P/N 3375D 15-75 lb cable tension gauge for 1/8” cable that Aircraft Spruce sells for $182.95 is on sale for $169.95. Free ground shipping on orders over $150 delivered in the US. The “D” in the part number is important – 3375G goes from 50 to 350 lb and works with larger 5/32” and 3/16” cables while the 3375H measures 50-350 lb and works with 1/4” cables. Go to www.aircraft-tool.com and search on “3375D”.  

   

-- Craig  

       

From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Roger & Lina Hill

 Sent: Saturday, April 18, 2009 5:20 PM

 To: zenith-list(at)matronics.com

 Subject: RE: HD/HDS cable specs  

  

  

   

   

Jeff;  

   

Thanks for the info. I set mine to 35 lbs today during the annual (the elevator was at 17 lbs when I first check it).   

I even bought a cable tester off my A&P for $130.  

I figure I will check the cables every 3 months, just to be safe. Anyway, it’s easy to do.  

   

Thanks again  

   

Roger  

   

         

  

From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Jeff 

 Sent: Saturday, April 18, 2009 7:56 AM

 To: zenith-list(at)matronics.com; zenith601-list(at)matronics.com

 Subject: HD/HDS cable specs  

  

   

Roger,  

      Edition 3 dated Jan. 1995 of the CH 601 (HD) Construction Manual gives the cables tension as "30 to 40 lbs." on page 29.  Since the HDS plans were an addendum to this manual, I presume the same tension applies to the HDS.  As far as I know, the cable runs were exactly the same for the HDS as for the HD.  

      Jeff Davidson  

   

Howdy all;  

   

I have my annual inspection on Saturday, and for the life of me I can't find  

the 601 HDS cable tension specs. Does anyone know what the elevator and  

rudder cables should be tension to on a 601 hds?  

   

Thanks  

   

Roger   	  Quote: 	
		    http://www.matronics.com/Navigator?Zenith-List http://forums.matronics.com http://www.matronics.com/contribution    	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List 	
0 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List 	
1 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List 	
2 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List 	
3 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List 	
4 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List 	
5 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List 	
6 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List 	
7

       [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

notsew_evets(at)frontiern
Guest

Posted: Sat Apr 18, 2009 4:17 pm Post subject: HD/HDS cable specs

Bestest purchase I ve made ....

  

 22

 40

 30

 Zackly!

 [quote]   ---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum