 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
rvickski(at)yahoo.com
Guest
|
 Posted: Wed May 20, 2009 11:54 am Post subject: Rivet length with .125 angle on 701 |
 |
|
I upped the ad5-6 to ad5-7, the avex I left the same. Spar web .025, +Cap .125 =grip lenght .150. + .156 rivet dia x 1.5= .234+.150=.384 which is a touch short for a -6 rivet. When riveting I didn't pay so much attention to the height as long as the shop head was 1.5 times the rivet starting diameter. The cabin sides are .032 material and the -6 is way too short.
Aircraft Sheet Metal by Jeppesen and AC43-13B are both good reference and procedure books.
Roy Szarafinski
roysgarage.com
701 etc.
---
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
 |
rvickski(at)yahoo.com
Guest
|
| Posted: Wed May 20, 2009 1:22 pm Post subject: Rivet length with .125 angle on 701 |
|
|
I should have said .384 is a touch LONG for a -6 rivet. The .040 strut/web spar doubler makes the 7/16 long rivet near perfect length.
Roy
---
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
JohnDRead(at)aol.com
Guest
|
| Posted: Wed May 20, 2009 3:11 pm Post subject: Rivet length with .125 angle on 701 |
|
|
Zenith construction standards will also give the added length required for a given rivet diameter. do not archive.
John Read
CH701 - Elbert CO - Jabiru 3300
Phone: 303-648-3261
Fax: 303-648-3262
Cell: 719-494-4567
In a message dated 5/20/2009 1:54:44 P.M. Mountain Daylight Time, rvickski(at)yahoo.com writes:
| Quote: | --> Zenith701801-List message posted by: Roy Szarafinski <rvickski(at)yahoo.com>
I upped the ad5-6 to ad5-7, the avex I left the same. Spar web .025, +Cap .125 =grip lenght .150. + .156 rivet dia x 1.5= .234+.150=.384 which is a touch short for a -6 rivet. When riveting I didn't pay so much attention to the height as long as the shop head was 1.5 times the rivet starting diameter. The cabin sides are .032 material and the -6 is way too short.
Aircraft Sheet Metal by Jeppesen and AC43-13B are both good reference and procedure books.
Roy Szarafinski
roysgarage.com
701 etc.
----- Original Message ----
From: kmccune <kmccune(at)somtel.net>
To: zenith701801-list(at)matronics.com
Sent: Wednesday, May 20, 2009 3:08:00 PM
Subject: Re: From 2003 and Mark T
--> Zenith701801-List message posted by: "kmccune" <kmccune(at)somtel.net>
Out of curiosity, those who have used the .125" wall angle, did you used teh standard ================================================
|
Dell Inspiron 15 Laptop: Now in 6 vibrant colors! Shop Dell's full line of laptops.
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
kmccune
Joined: 22 Sep 2007
Posts: 577
Location: Wisconsin, USA
|
| Posted: Thu May 21, 2009 3:38 am Post subject: Re: Rivet length with .125 angle on 701 |
|
|
Thanks for the help guys.
Kevin
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
“Always do what you are afraid to do.”
R.W. Emerson (1803-1882)
"Real freedom is the sustained act of being an individual." WW - 2009
"Life is a good deal...it's worth it" Feb 1969
Dorothy McCune |
|
| Back to top |
|
|
zodierocket(at)hsfx.ca
Guest
|
| Posted: Tue May 26, 2009 5:45 am Post subject: Rivet length with .125 angle on 701 |
|
|
Mark Townsend
Can-Zac Aviation Ltd.
519-590-7601 www.canzac.ca
Canadian Dealer for Zenith Aircraft Kits, Zenair Designs.
--
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
Download |
| Filename: |
Can-Zac_Aviation_Ltd._(president@can-zacaviation.com).vcf |
| Filesize: |
195 Bytes |
| Downloaded: |
290 Time(s) |
|
|
| Back to top |
|
|
kmccune
Joined: 22 Sep 2007
Posts: 577
Location: Wisconsin, USA
|
| Posted: Tue May 26, 2009 2:17 pm Post subject: Re: Rivet length with .125 angle on 701 |
|
|
Mark,
???
do not archive
Kevin
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
“Always do what you are afraid to do.”
R.W. Emerson (1803-1882)
"Real freedom is the sustained act of being an individual." WW - 2009
"Life is a good deal...it's worth it" Feb 1969
Dorothy McCune |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
