Matronics Email Lists :: View topic - 582 NON Rotax electric starter question

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

582 NON Rotax electric starter question

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

aslsa.rng(at)gmail.com
Guest

Posted: Thu Jul 30, 2009 11:12 am Post subject: 582 NON Rotax electric starter question

Doing the annual on my Mk 3 and decided to pull apart the GPL starter to clean and inspect. To make a long story short, there are four 6mm X 1.25 X 18mm socket head cap screws that hold the spacer spool for the recoil starter to the adapter ring that bolts to the stock Rotax crank damper. They need to be 25mm (~1.0 in) long, IMHO, as they only have about 7mm (a little over 1/4") of engagement in the adapter. The problem is that all I can find at McMaster Carr, Fastenal, Bolt Depot, ad infinitum is 6mm X 1.00 thread pitch. I've measured the bolts I have with my trusty SPI thread gage and they are definitely 1.25 pitch.  Anybody know of a source?

Rick Girard

  [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum