Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Torque Wrench Extensions

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV8-List
View previous topic :: View next topic  
Author Message
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
PostPosted: Sun Aug 16, 2009 10:45 am    Post subject: Torque Wrench Extensions Reply with quote
Well, now that I found my Hartzell installation manual (!), there appears to be a need for a "special" tool that I don't have. Because the bolts for the prop require and "end-wrench" of sorts to tighten, it presents somewhat of a problem when trying to torque them. The manual shows an end-wrench looking thing that has the 7/16" on one end and a 3/8" drive on the other end. I looked though the Craftsman and Snapon web sites, but didn't find anything like this. Where might I buy one?

Thanks!

Matt Dralle
RV-8 #82880 N998RV
http://www.mykitlog.com/dralle
FWF

- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
breece28117(at)yahoo.com
Guest
PostPosted: Sun Aug 16, 2009 11:41 am    Post subject: Torque Wrench Extensions Reply with quote
Avery Tool has that HARTZELL-STYLE PROPELLER WRENCH. Go to http: //www.averytools.com/p-734-hartzell-style-propeller-wrench.aspx


From: Matt Dralle <dralle(at)matronics.com>
To: rv8-list(at)matronics.com; rv-list(at)matronics.com
Sent: Sunday, August 16, 2009 2:43:55 PM
Subject: Torque Wrench Extensions

--> RV8-List message posted by: Matt Dralle <dralle(at)matronics.com (dralle(at)matronics.com)>
Well, now that I found my Hartzell installation manual (!), there appears to be a need for a "special" tool that I don't have. Because the bolts for the prop require and "end-wrench" of sorts to tighten, it presents somewhat of a problem when trying to torque them. The manual shows an end-wrench looking thing that has the 7/16" on one end and a 3/8" drive on the other end. I looked though the Craftsman and Snapon web sites, but didn't find anything like this. Where might I buy one?

Thanks!

Matt Dralle
RV-8 #82880 N998RV
http://www.mykitlog.com/dralle
FWFnbsp; =======================

[quote][b]

- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List
Back to top
Larry Bowen



Joined: 09 Jan 2006
Posts: 802
Location: NC, USA
PostPosted: Sun Aug 16, 2009 1:54 pm    Post subject: Torque Wrench Extensions Reply with quote
http://blog.bowenaero.com/?p=17

It's possible to roll your own using a flex head wrench, above.

--
Larry Bowen
Larry(at)BowenAero.com
http://BowenAero.com

On Sun, Aug 16, 2009 at 3:41 PM, Breece Nesbitt<breece28117(at)yahoo.com> wrote:
Quote:
Avery Tool has that HARTZELL-STYLE PROPELLER WRENCH.  Go to http:
//www.averytools.com/p-734-hartzell-style-propeller-wrench.aspx

________________________________
From: Matt Dralle <dralle(at)matronics.com>
To: rv8-list(at)matronics.com; rv-list(at)matronics.com
Sent: Sunday, August 16, 2009 2:43:55 PM
Subject: Torque Wrench Extensions


Well, now that I found my Hartzell installation manual (!), there appears to
be a need for a "special" tool that I don't have.  Because the bolts for the
prop require and "end-wrench" of sorts to tighten, it presents somewhat of a
problem when trying to torque them.  The manual shows an end-wrench looking
thing that has the 7/16" on one end and a 3/8" drive on the other end.  I
looked though the Craftsman and Snapon web sites, but didn't find anything
like this.  Where might I buy one?

Thanks!

Matt Dralle
RV-8 #82880 N998RV
http://www.mykitlog.com/dralle
FWFnbsp;                    =======================



- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

_________________
Larry Bowen
RV-8 SOLD,
RV-7QB in progress...
Back to top
View user's profile Send private message Visit poster's website AIM Address MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV8-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group