Matronics Email Lists :: View topic - Fitting The Spinner To A Hartzell

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fitting The Spinner To A Hartzell

Matronics Email Lists Forum Index -> RV8-List

View previous topic :: View next topic

Author Message

Matt Dralle
Site Admin

Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA

Posted: Sun Aug 30, 2009 8:36 am Post subject: Fitting The Spinner To A Hartzell

Listers,



Hartzell recommends a minimum .1" clearance around the prop blade for the spinner.  I did that exactly, but the prop would still bang on the spinner at full pitch.  I had to hog out to .25" to keep the clearance at .1" at full pitch.  It looked stupid having such a large gap in one area only so I evened it up to .25" all the way around.  But now it kind of looks like I made the holes too big.  I just can't recall seeing other installations to know if my .25" is "too much".  Anyone have any pics or thoughts on the clearance using late-model Van's CS spinner and a Hartzell, particularly the 72" paddle blades I've got?



Thanks!



Matt Dralle

RV-8 #82880 N998RV

http://www.mykitlog.com/dralle

- The Matronics RV8-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

_________________
Matt Dralle
Matronics Email List Administrator

Display posts from previous:

	Matronics Email Lists Forum Index -> RV8-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum