Matronics Email Lists :: View topic - Changing Z12 to the Z14 electrical system

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Changing Z12 to the Z14 electrical system

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

DCS317(at)aol.com
Guest

Posted: Wed Sep 02, 2009 4:43 pm Post subject: Changing Z12 to the Z14 electrical system

Bob and group,

 I have a Z12 system in my RV-8 and want to change to Z14 because of my  comfort zone with two batteries and two separate busses.  I've  researched Z14 in the archives and can't find anything about my questions  below:

 1.Do I have to buy a second LR-3 alternator controller for my 20 amp aux  alternator or can I use my old SB-1 alternator controller, doing whatever is  necessary and prudent with the Hall effect current sensor and leads 1 and 2 that  connect to the Hall sensor from the SB-1 controller?

 2. Since I finished my RV-8 in 1994, are there any new suggestions for  the main or aux warning lights on Z14?

 3. I didn't include the battery temp sensor in 1994 in the Z12.   Should I include them in my Z14?

  

  

 Don RV-8 N417DS

  

 

  [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum