MHerder
Joined: 11 Feb 2008 Posts: 143 Location: Fort Worth TX
|
Posted: Sat Sep 12, 2009 10:25 am Post subject: 601 HD Aileron Fitting, Right wing installed-Photo Request |
|
|
Im looking for some help with the interface between the aileron and the center section on my HD. I am in the process of fitting up my wings, and have my right wing bolted up. Then I went to put my aileron on and found that it didn't fit, it was approximately 15 mm too long to fit between the center section trailing edge and the outboard trailing edge. After looking at the plans a little further it appears that I should have waited until the wing was installed before I installed center section trailing edge fairing (6e 1-1 if I recall correctly). The drawings poorly illustrate that the aileron aligns with the top skin which I now believe not to be the case. Yes my aileron is exactly 2400 mm long.
Can someone please send me a photos from the top, rear, and bottom of this tricky interface. THANKS IN ADVANCE FOR YOUR HELP!!!
Did anyone else have trouble with this???
| - The Matronics Zenith601-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith601-List |
|
_________________ Zodiac 601 HD
Jabiru 3300
Wood Sensinich 64x47
Finally Flying |
|