Matronics Email Lists :: View topic - Aileron Mass Balance foam

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Aileron Mass Balance foam

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

asarangan(at)yahoo.com
Guest

Posted: Sun Apr 09, 2006 7:49 pm Post subject: Aileron Mass Balance foam

How did you guys shape the foam for making the aileron mass balance

horns? Hot wire, or just sand it down? 

Andrew Sarangan

http://www.sarangan.org

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

ptag.dev(at)tiscali.co.uk
Guest

Posted: Sun Apr 09, 2006 10:00 pm Post subject: Aileron Mass Balance foam

Hi! Andrew

Just sand it down if it's wrong you should have plenty more to run again

!

Regards

Bob Harrison G-PTAG Europa MKI/Jabiru 3300



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

EuropaXSA276(at)aol.com
Guest

Posted: Mon Apr 10, 2006 8:45 am Post subject: Aileron Mass Balance foam

Hi Andrew. I used a hacksaw blade and a sanding block. 



Brian Skelly

Europa XS TriGear #A276

North Texas USA

You can see my build photos at:

www.europaowners.org/brians

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

topglock(at)cox.net
Guest

Posted: Mon Apr 10, 2006 2:21 pm Post subject: Aileron Mass Balance foam

Same here, Brian.  Hacksaw to rough shape and sanding block the rest.



Good to see you at SNF.



Jeff - N55XS

164 hours



EuropaXSA276(at)aol.com wrote:

 	  Quote: 	
		   

 

 Hi Andrew. I used a hacksaw blade and a sanding block. 

 

 Brian Skelly

 Europa XS TriGear #A276

 North Texas USA

 You can see my build photos at:

 www.europaowners.org/brians

 

 

 

 

 

 

 

  

  

  

 

 

 

 

 


	




--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

SPurpura(at)aol.com
Guest

Posted: Mon Apr 10, 2006 2:40 pm Post subject: Aileron Mass Balance foam

You might try a Surform rasp before the sanding block.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum