Matronics Email Lists :: View topic - PC to LASAR ignition test cable.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

PC to LASAR ignition test cable.

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

tomw(at)charterops.com
Guest

Posted: Thu Nov 19, 2009 9:10 am Post subject: PC to LASAR ignition test cable.

Hi,  My IO-360 has a LASAR ignition that has failed.  I am looking for the PC to LASAR box cable to run troubleshooting.  I would like to buy or rent this cable...does anyone have one??



Thanks,

Tom Wright 203-551-0746

  [quote]PRIVACY NOTICE: The information contained in this e-mail (and in any included attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. §§ 2510-2521, and is legally privileged. In addition, it is confidential and intended only for the use of the recipient(s) named above. The review, dissemination, distribution, copying or other use of this information by or to anyone other than the intended recipient is strictly prohibited. If you have received this communication in error, please notify us immediately and delete this message from your system. Thank you.   [quote][b]

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

recapen(at)earthlink.net
Guest

Posted: Thu Nov 19, 2009 11:24 am Post subject: PC to LASAR ignition test cable.

I'm interested in this - just in case.



I have a LASAR system in my 6A and knock on wood it's currently fine.



I would be willing to build a cable if someone has the pinouts...



Ralph Capen



--

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

tomw(at)charterops.com
Guest

Posted: Thu Nov 19, 2009 11:51 am Post subject: PC to LASAR ignition test cable.

It has to be fairly simple...8 pins.  I could build one also if I just had the pin outs.  BTW, I have put 300 hours on my RV-8 and it has worked great but it (LASAR) suddenly quit in cruise flight...everything is connected and the LASAR rep says to get the cable and readout the diagnostic.  Cable is ridiculous at $160.  I wish I could rent one...then I would make my own.

 

On Thu, Nov 19, 2009 at 12:47 PM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:

[quote] --> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

 

 

I'm interested in this - just in case.

 

 I have a LASAR system in my 6A and knock on wood it's currently fine.

 

 I would be willing to build a cable if someone has the pinouts...

 

 Ralph Capen

 



 --

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

pitts_pilot(at)bellsouth.
Guest

Posted: Thu Nov 19, 2009 12:46 pm Post subject: PC to LASAR ignition test cable.

I hate to suggest the obvious, but have you asked the LASAR folks for 

the pinout of the cable???

Linn



Tom Wright wrote:

[quote] It has to be fairly simple...8 pins.  I could build one also if I just 

 had the pin outs.  BTW, I have put 300 hours on my RV-8 and it has 

 worked great but it (LASAR) suddenly quit in cruise flight...everything 

 is connected and the LASAR rep says to get the cable and readout the 

 diagnostic.  Cable is ridiculous at $160.  I wish I could rent 

 one...then I would make my own.

 

 On Thu, Nov 19, 2009 at 12:47 PM, Ralph E. Capen <recapen(at)earthlink.net 

 <mailto:recapen(at)earthlink.net>> wrote:

 

     

     <recapen(at)earthlink.net <mailto:recapen(at)earthlink.net>>

 

     I'm interested in this - just in case.

 

     I have a LASAR system in my 6A and knock on wood it's currently fine.

 

     I would be willing to build a cable if someone has the pinouts...

 

     Ralph Capen

 

     --

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

tomw(at)charterops.com
Guest

Posted: Thu Nov 19, 2009 1:24 pm Post subject: PC to LASAR ignition test cable.

Actually no...great idea, i just assumed they wouldn't provide it but of course it never hurts to ask.



On Thu, Nov 19, 2009 at 2:59 PM, Linn Walters <pitts_pilot(at)bellsouth.net (pitts_pilot(at)bellsouth.net)> wrote:

 [quote]--> RV-List message posted by: Linn Walters <pitts_pilot(at)bellsouth.net (pitts_pilot(at)bellsouth.net)>

  

 I hate to suggest the obvious, but have you asked the LASAR folks for the pinout of the cable???

 Linn

 

 Tom Wright wrote:

 [quote] It has to be fairly simple...8 pins.  I could build one also if I just had the pin outs.  BTW, I have put 300 hours on my RV-8 and it has worked great but it (LASAR) suddenly quit in cruise flight...everything is connected and the LASAR rep says to get the cable and readout the diagnostic.  Cable is ridiculous at $160.  I wish I could rent one...then I would make my own.

  



 On Thu, Nov 19, 2009 at 12:47 PM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net) <mailto:recapen(at)earthlink.net (recapen(at)earthlink.net)>> wrote:

  

     --> RV-List message posted by: "Ralph E. Capen"



     <recapen(at)earthlink.net (recapen(at)earthlink.net) <mailto:recapen(at)earthlink.net (recapen(at)earthlink.net)>>

 

     I'm interested in this - just in case.

 

     I have a LASAR system in my 6A and knock on wood it's currently fine.

 

     I would be willing to build a cable if someone has the pinouts...

 

     Ralph Capen

 

     --

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

recapen(at)earthlink.net
Guest

Posted: Thu Nov 19, 2009 1:25 pm Post subject: PC to LASAR ignition test cable.

Good idea - I was going to look in my reference documentation first.  I just started thinking about this from the original post....



Need an afternoon coffee

--

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Gary.A.Sobek

Joined: 09 Jan 2006
Posts: 217
Location: SoCAL USA

Posted: Thu Nov 19, 2009 5:44 pm Post subject: PC to LASAR ignition test cable.

Just a note to the guys located in SoCAL.  



I have the PC to LASAR controller box cable C the T100 tool kit C all the factory manuals C a current subscription to the manuals C the LASAR timing light C a spare controller box (O-360 w/o CHT) C and three spare LASAR mags (one has 25-hours [w/sensor] C the other two ~ 500 hours[1-w/sensor C 1-w/o sensor).



NO I will not ship the cable.  I also have never used it.



I purchased the cable from Bart at AeroSport Power in Kamloops C BC. He and Sue will give you some of the best prices on LASAR parts/equipment.



Gary A. Sobek 

A&P

DAR

"My Sanity" RV-6 N157GS O-320 Hartzell C  

2 C334+ Flying Hours So. CA C USA   (hangared KCCB)

http://www.rvdar.com

Date: Thu C 19 Nov 2009 11:52:54 -0500

Subject: PC to LASAR ignition test cable.

From: tomw(at)charterops.com

To: rv-list(at)matronics.com



Hi C  My IO-360 has a LASAR ignition that has failed.  I am looking for the PC to LASAR box cable to run troubleshooting.  I would like to buy or rent this cable...does anyone have one??



Thanks C

Tom Wright 203-551-0746

   	  Quote: 	
		  PRIVACY NOTICE: The information contained in this e-mail (and in any includedattachments) is covered by the Electronic Communications Privacy Act C 18 U.S.C.§§ 2510-2521 C and is legally privileged. In addition C it is confidential and intendedonly for the use of the recipient(s) named above. The review C dissemination Cdistribution C copying or other use of this information by or to anyone other than theintended recipient is strictly prohibited. If you have received this communication inerror C please notify us immediately and delete this message from your system.Thank you. 	  Quote: 	
		  http://forums.matronics.co================= 	
	
 		 	   		  Windows 7: It works the way you want. Learn more.[/url]  [quote][b]

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

recapen(at)earthlink.net
Guest

Posted: Thu Nov 19, 2009 6:14 pm Post subject: PC to LASAR ignition test cable.

Gary,

  

 Are you willing to give us the  pinout?

  

  

 [quote]   ---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Gary.A.Sobek

Joined: 09 Jan 2006
Posts: 217
Location: SoCAL USA

Posted: Thu Nov 19, 2009 7:46 pm Post subject: PC to LASAR ignition test cable.

There is no pin out that I can find in the documentation. They want to SELL you the cable.  I have not tried to reverse engineer it and my time is worth more than the cost of the cable to reverse engineer it.



Gary A. Sobek 

"My Sanity" RV-6 N157GS O-320 Hartzell C  

2 C334+ Flying Hours So. CA C USA 



From: recapen(at)earthlink.net

To: rv-list(at)matronics.com

Subject: Re: PC to LASAR ignition test cable.

Date: Thu C 19 Nov 2009 21:13:41 -0500



      .ExternalClass .ecxhmmessage P {padding-bottom:0px;padding-left:0px;padding-right:0px;padding-top:0px;} .ExternalClass BODY.ecxhmmessage {font-family:Verdana;font-size:10pt;}     Gary C

  

 Are you willing to give us the  pinout?

  

  

 [quote]   ---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum