Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

MkI with 912S

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

klaus.dietrich(at)oracle.
Guest

Posted: Wed Dec 09, 2009 2:25 am Post subject: MkI with 912S

After over 1000h on my good 912, I'm thinking about "upgrading" my Europa "Mk I" (mono) with a new 912 "S" engine.

 I'm wondering if the "Mk I" cowling with it's radiators will be ok for the 912S, or if I have to change the cowling/engine mount etc to the "Mk II" version...

 In my current installation I have mounted the oil cooler just below the spinner in the lower cowling and never had any tempreature issues.

 

 Is anybody out there having an original "Europa Mk I" with a 912S?

 Appreciate your advise!

 Thanks,

 Klaus

 (OE-CKD, 134)

 

 

    [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

pete(at)lawless.info
Guest

Posted: Wed Dec 09, 2009 3:03 am Post subject: MkI with 912S

Hi Klaus  

   

I have been thinking of doing the same thing.  The 912S is the same size as the 912 so no problem for a direct exchange.  – However, Nigel Charles found that the larger starter motor available for the 912S would not fit with the Classic engine mount (so use smaller starter and the ‘soft start’ pack.  Also I understand from Peter Rees that the new AC mechanical fuel pump will not fit as it fouls the radiator on the Classic.  The original pump is available Peter sent me the following contact who can supply.    

   

Regards  

   

Pete  

Pump came from a Pieburg distributor in Germany (he seems to send the pumps   

and rely on trust for you to send the money!) - he can be contacted at   

www.ruddies-burlin.de  the pump model number is 7.20971.55    

--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

pete(at)lawless.info
Guest

Posted: Wed Dec 09, 2009 5:28 am Post subject: MkI with 912S

Klaus  

   

There was a type in the contact address for the pump should be /www.ruddies-berlin.de/  

   

Pete  

   

--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum