Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Passive vector redirector (RJP version) 2 for each door

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
rparigoris



Joined: 24 Nov 2009
Posts: 804

PostPosted: Mon Dec 21, 2009 4:06 pm    Post subject: Passive vector redirector (RJP version) 2 for each door Reply with quote

In case anyone is interested here is what we did as far as anti bulge between shoot bolts and top aft warping on doors:
*Anti bulge between shoot bolts, I know that there are many ways to skin a cat, can install a smaller seal, strengthen door with aluminium plate or Uni, or warp door and install glass and hope it don't change, I opted for a passive pin and striker. Pin on fuse and striker on door. Stupid and simple.
*Anti top aft door warping, I know there are many changing strut position with chance warp will be worst than if strut were kept in original position. I investigated Ted Gladstone geometry, boy with my XS kit A-265 with 4130 chrome moly harness attachment just aft of door rebate, I just don't know if I could fit without major surgery. I opted to keep strut in original position, laid up 1 layer of CF on door and installed a pin and striker. What a slick piece of geometry! The pin is aimed 6 degrees off neutral and relieves stress on door when closed while at the same time tugging down on the top surface of door. It is true that if you left the door opened it can still warp, but if I tie doors together when they are opened for any long legth of time, I am preparing to make that an easy thing to do.
Details from here on:
http://www.europaowners.org/forums/gallery2.php?g2_itemId=76536
I will not Redux in place until I finish bonding on second wing skin so I don't run short on Redux. Present things are only bonded in place with JB KWIK Weld onto scuff sanded 3M 375 packaging tape and sheet metal screws, works great though! Redux and Stainless rivets for real deal.
Ron Parigoris


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group