captainron1(at)cox.net
Guest
|
 Posted: Fri Jan 08, 2010 8:46 am Post subject: Kolb-List: |
 |
|
Or, you can move the gate about 600 ft and then you can T.O & L all within the front yard. (if you got the frontage).
Anyway for my next home that's my dream! 
Ron (at) KFHU
================
---- b young <by0ung(at)brigham.net> wrote:
=============
Still, I do like the idea of raising the tail really high (over 10')....if
I ever needed to. Then I could go through the gate without having to just
squeeze through.
Mike Welch
When you get to the gate take some chalk and mark your tire position,,,
when you are happy with the location, take a can of spray paint and paint
a small dot, or row of dots.
I would envision a trailer with a long c channel for the tail wheel.
lift the tail wheel into the c channel.then push the plane back to the ramps
for the main gear, have them mounted on a pivot, or teeter totter 5 ft on
one side 1 ft on the other. with the plane on the ground the ramp ends
would hit the ground,,,, when the plane is on the trailer, the wheels
would be just past the pivot point of the ramp and hold the ramps off the
ground. You may only have to roll the plane up 4 inches or so for
clearance.
Boyd
--
kugelair.com
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
