Matronics Email Lists :: View topic - RV-List Digest: 6 Msgs

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

RV-List Digest: 6 Msgs - 03/31/10

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

ianxbrown

Joined: 16 May 2009
Posts: 80

Posted: Thu Apr 01, 2010 9:26 am Post subject: RV-List Digest: 6 Msgs - 03/31/10

I installed mine on forward with the lock just above the rail, mounted on the forward canopy side metalwork just aft of the roll bar..   I cut a slot in top of the slider rail that the locking tab turns down into for the locked position.  Works fine for me.

 

 Ian Brown, RV-9A, C-GOHM  	  Quote: 	
		  



Snippet

"I am getting ready to install the locking mechanism on my 6A slider.  The lock

uses the same key as the ignition and the locking mechanisms came with the ignition

switch set.



I am trying to figure out where to install it as the side skirt bows out in the

middle and the slider rail that the lock bar goes in to is straight front to

back.  Essentially, there are two installation points (foreward and aft) on each

side."

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

bobbyhester(at)newwavecom
Guest

Posted: Thu Apr 01, 2010 5:34 pm Post subject: RV-List Digest: 6 Msgs - 03/31/10

Here is a picture of mine, I've got two slots full shut and a little 

open for air circulation when parked out in the hot sun.



----

Surfing the web from Hopkinsville, KY

Visit my web site:

http://home.newwavecomm.net/bobbyhester/RVSite.htm



 	  Quote: 	
		   "I am getting ready to install the locking mechanism on my 6A slider.  The lock

 uses the same key as the ignition and the locking mechanisms came with the ignition

 switch set.



 I am trying to figure out where to install it as the side skirt bows out in the

 middle and the slider rail that the lock bar goes in to is straight front to

 back.  Essentially, there are two installation points (foreward and aft) on each

 side."

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

P1020714sm.JPG

Description:

Filesize:

107.93 KB

Viewed:

1194 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum