Matronics Email Lists :: View topic - wing spar insert to center wing section

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

wing spar insert to center wing section

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

tinerj2005(at)tinerj.com
Guest

Posted: Tue Apr 25, 2006 9:28 am Post subject: wing spar insert to center wing section

Building 601xl. I'm about the drill the holes to fit the wing spar center

section to the cabin floor. The photo guide says to insert and bolt the

wing spar inserts in the center section. I'm to drill a hole in the insert

to match the middle hole in the center section.



I've reviewed the plans, the photo guide, and the archives but cannot

figure out how far the bolt hole goes in the spar insert. 



Later, the spar insert will be used to make a jig to locate the distance

and angle of the rear frame channel relative to the wing spar so that the

attach plates will line up with the wing's rear channel.



However, I'm not that far along. My current goal is to get the spar insert

at the right distance in the center spar section. Does anyone have the

dimension for those holes?



My wing spar inserts, 6B13, are perfectly rectangular, 200mm horizontal and

212 vertical.



John Hudson Tiner

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum