Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fuel Head

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

tonyrenshaw268(at)gmail.c
Guest

Posted: Tue Jun 08, 2010 6:20 pm Post subject: Fuel Head

Gidday,

Is there any advantage in elevating my fuel system downstream of my fuel pumps located low in the system quickly up to selectors and filters within the tunnel, to minimise the fuel "quantity", and "mass" when it comes to minimising the effects of head. I recall reading the fuel pumps have an 18" head, which is OK for us, but it would actually suit me to elevate it quickly in the back of the tunnel to the underside of a shelf I have cross tunnel, quite close to the top at the mid tunnel position. I suppose the flip side is that if you had a very shallow angle, you could ultimately get a volume of fluid a pump couldn't push. Does anyone see a problem with this idea.??

Reg

Tony Renshaw

Sydney Ausssie

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum