Matronics Email Lists :: View topic - Rivet squeezer for solid rivets

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rivet squeezer for solid rivets

Matronics Email Lists Forum Index -> Zenith601-List

View previous topic :: View next topic

Author Message

mhubel

Joined: 05 Sep 2009
Posts: 141

Posted: Mon Jun 21, 2010 11:37 am Post subject: Rivet squeezer for solid rivets

If anyone is interested, I have a rivet squeezer along with the 

required yokes and dies to put in the solid #6 rivets in the main spar 

and the #5 solid rivets along the joint on the top of the center spar 

connecting the two half's (the 20 mm pitch rivets). The yokes are not 

big enough to do the solid rivets on the center spar on the vertical 

surfaces. I found the latter to be the easiest ones to put in with a 

rivet gun  anyway.



     I am willing to lend it to others or even sell the bunch. I have 

about $450 tied up in all the parts. It might be a good tool for a club. 

It will do up to #6 rivets.



-- 

Mark Hubelbank

NorthEast Monitoring

2 Clock Tower Place

Suite 555

Maynard, MA, 01754 - USA

mhubel(at)nemon.com

978-443-3955

- The Matronics Zenith601-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List

_________________
Mark Hubelbank
N708HU
CH601XL
Jabiru 3300
Rotec TBI 40-3 carb
Sensenich ground adj prop.
240 hr TAF
Pictures at photo.hubbles.com

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith601-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum