Matronics Email Lists :: View topic - AC 680FLP Pressure reducer

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

AC 680FLP Pressure reducer

Matronics Email Lists Forum Index -> Commander-List

View previous topic :: View next topic

Author Message

hcourier(at)cox.net
Guest

Posted: Tue Jun 29, 2010 7:43 am Post subject: AC 680FLP Pressure reducer

Hello, 

  

 I am in need of an overhaul of a pressure reducer from   the hydraulic system of an Aero Commander 680FLP, Mr. RPM  conversion.  The pump pressure is about 3,000 psi and the aircraft system  works around 1,000 psi.  Had the pressure go to 2,000 psi recently and  broke a line.  Most recent runup was OK but I don't trust it now.   Have had two complete hydraulic failures this year, don't want any more.  

  

 Maintenance guys have found someone to overhaul, but  it's around $5,500 (ripoff price) and 45-60 days.  I can't believe a  pressure reducer is that complicated an item..

  

 Does anyone have a pressure reducer for sale...sorry I  don't have a part number at the moment.  Experienced Commander folks will  probably know what I need, but I can get the part #.

  

 Thanks, 

  

 Ray Mansfield

   [quote][b]

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

rubithm

Joined: 11 Feb 2009
Posts: 8

Posted: Tue Jun 29, 2010 8:28 am Post subject: AC 680FLP Pressure reducer

yes harry merritt

 321 267-3141

 [quote]   ---

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

_________________
Harry Merritt

dfalik(at)sbcglobal.net
Guest

Posted: Wed Jun 30, 2010 4:03 am Post subject: AC 680FLP Pressure reducer

Hi,

  

 I  needed a pressure regulator for my 500S 3 years ago and the only on available  was an overhauled one on a shelf in Indianna for $5000.00 PLUS a $3000.00  core charge if mine was rebuildable.

  

 Apparently there is only one place that rebuilds them and there are  some parts in there that are not available any more and have to be  "machined".

  

 Luckily mine was rebuildable and I was able to recover my core  charge.

  

 Good  luck.

  

 I  still have half of a rear door hinge that cost me $950.00.  I was able to  have the broken one welded but was unable to return the new 1/2 because 2 weeks  had elapsed.

  

 Don

 [quote]   --

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

hcourier(at)cox.net
Guest

Posted: Wed Jun 30, 2010 4:38 am Post subject: AC 680FLP Pressure reducer

Thanks Don, appreciate the information.

  

 Ray M.

  

  



  From: dfalik(at)sbcglobal.net (dfalik(at)sbcglobal.net) 

 Sent: Wednesday, June 30, 2010 7:03 AM

 To: commander-list(at)matronics.com (commander-list(at)matronics.com)  

 Subject: RE: AC 680FLP Pressure  reducer

 



 Hi,

  

 I  needed a pressure regulator for my 500S 3 years ago and the only on available  was an overhauled one on a shelf in Indianna for $5000.00 PLUS a $3000.00  core charge if mine was rebuildable.

  

 Apparently there is only one place that rebuilds them and there are  some parts in there that are not available any more and have to be  "machined".

  

 Luckily mine was rebuildable and I was able to recover my core  charge.

  

 Good  luck.

  

 I  still have half of a rear door hinge that cost me $950.00.  I was able to  have the broken one welded but was unable to return the new 1/2 because 2 weeks  had elapsed.

  

 Don

 [quote]   --

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

rubithm

Joined: 11 Feb 2009
Posts: 8

Posted: Wed Jun 30, 2010 5:51 am Post subject: AC 680FLP Pressure reducer

I have one 

 Harry Merritt

 321 267-3141

 [quote]   ---

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

_________________
Harry Merritt

BillLeff1(at)aol.com
Guest

Posted: Sat Jul 10, 2010 7:55 am Post subject: AC 680FLP Pressure reducer

What is the part number? I may have one.

  

 Bill Leff

  

  In a message dated 6/30/2010 8:04:06 A.M. Eastern Daylight Time,  dfalik(at)sbcglobal.net writes:

 [quote]   Hi,

    

   I    needed a pressure regulator for my 500S 3 years ago and the only on available    was an overhauled one on a shelf in Indianna for $5000.00 PLUS a $3000.00    core charge if mine was rebuildable.

    

   Apparently there is only one place that rebuilds them and there are    some parts in there that are not available any more and have to be    "machined".

    

   Luckily mine was rebuildable and I was able to recover my core    charge.

    

   Good    luck.

    

   I    still have half of a rear door hinge that cost me $950.00.  I was able to    have the broken one welded but was unable to return the new 1/2 because 2    weeks had elapsed.

    

   Don

   [quote]     --

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

hcourier(at)cox.net
Guest

Posted: Mon Jul 12, 2010 6:13 am Post subject: AC 680FLP Pressure reducer

Hi Bill,

  

 I've got a part #, it  is:   EA1563 Pressure  Regulator.

  

 There appears to be a small accumulator that is part of  this mechanism, so I want to be sure we got the right part.  I asked my  maintenance guy about this and he assured me this was the right part #.   Let me know what you have.  

  

 Thanks,   

  

 Ray  Mansfield

  

  

  

  



  From: BillLeff1(at)aol.com (BillLeff1(at)aol.com) 

 Sent: Saturday, July 10, 2010 10:55 AM

 To: commander-list(at)matronics.com (commander-list(at)matronics.com)  

 Subject: Re: AC 680FLP Pressure  reducer

 



 What is the part number? I may have one.

  

 Bill Leff

  

  In a message dated 6/30/2010 8:04:06 A.M. Eastern Daylight Time, dfalik(at)sbcglobal.net (dfalik(at)sbcglobal.net) writes:

 [quote]   Hi,

    

   I needed a    pressure regulator for my 500S 3 years ago and the only on available was an    overhauled one on a shelf in Indianna for $5000.00 PLUS a $3000.00 core    charge if mine was rebuildable.

    

   Apparently    there is only one place that rebuilds them and there are some parts in there    that are not available any more and have to be "machined".

    

   Luckily    mine was rebuildable and I was able to recover my core    charge.

    

   Good    luck.

    

   I still    have half of a rear door hinge that cost me $950.00.  I was able to have    the broken one welded but was unable to return the new 1/2 because 2 weeks had    elapsed.

    

   Don

   [quote]     --

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

hcourier(at)cox.net
Guest

Posted: Mon Jul 12, 2010 6:14 am Post subject: AC 680FLP Pressure reducer

Hi Harry, 

  

  I've got a part # for the  pressure regulator, it is:   EA1563 Pressure Regulator.

  

 There appears to be a small accumulator that is part of  this mechanism, so I want to be sure we got the right part.  I asked my  maintenance guy about this and he assured me this was the right part #.   Let me know what you have and if we're talking about the same thing.   

  

 Thanks,   

  

 Ray  Mansfield

 850-217-5185

  

  

  



  



  From: Harry Merritt (avtectwo(at)cfl.rr.com) 

 Sent: Tuesday, June 29, 2010 11:24 AM

 To: commander-list(at)matronics.com (commander-list(at)matronics.com)  

 Subject: Re: AC 680FLP Pressure  reducer

 



 yes harry merritt

 321 267-3141

 [quote]   ---

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Commander-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum