Matronics Email Lists :: View topic - warning lamp for LR3C regulators (CORRECTION)

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

warning lamp for LR3C regulators (CORRECTION)

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Thu Sep 09, 2010 8:18 am Post subject: warning lamp for LR3C regulators (CORRECTION)

At 10:00 PM 9/8/2010, you wrote:

Bob,

I asked the same question at the end of July and the diagram you put 

out at that time said two 230 ohm resistors for 14 volt.  I built the 

system that way and it works fine.  I have not run the engine so I 

have not seen full voltage yet.  Is the righer resistance needed for 

the higher voltage ?  Just wondering and wanting to better understand 

my electrical system.  Thanks. Don

   I picked the 220 ohm resistors a number of years ago

   with some notion of "over driving" red leds to get

   sunlight viewability flashes. Nowadays, there are high-

   intensity leds that perform better at the rated 30 mA

   than the older leds peformed at 2x rated current. Hence

   and adjustment of the resistor values.



   But if what you have in place is working for you, don't

   change it.

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum