Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

quadrant throttle and mixture cable lengths

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
dlm34077



Joined: 10 Feb 2007
Posts: 115
Location: AZ

PostPosted: Tue Nov 02, 2010 10:58 am    Post subject: quadrant throttle and mixture cable lengths Reply with quote

The original throttle and mixture cable lengths are reported to be 45.5 and 49.5 inches. For my installation they are only adequate by routing between the motor mount and engine. I routinely replace the external protective covering of propylene tubing. I am thinking that if I replace these cables with a longer version i can eliminate an item of routine maintenance. What cable lengths are others using for the quadrant. The prop cable supplied seem fine.
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
dave.saylor.aircrafters(a
Guest





PostPosted: Tue Nov 02, 2010 8:51 pm    Post subject: quadrant throttle and mixture cable lengths Reply with quote

Cable lengths:

http://tinyurl.com/23m9ejx

Dave Saylor
AirCrafters
140 Aviation Way
Watsonville, CA 95076
831-722-9141 Shop
831-750-0284 Cell
On Tue, Nov 2, 2010 at 11:55 AM, DLM <dlm34077(at)cox.net> wrote:
Quote:

The original throttle and mixture cable lengths are reported to be 45.5 and 49.5 inches. For my installation they are only adequate by routing between the motor mount and engine. I routinely replace the external protective covering of propylene tubing. I am thinking that if I replace these cables with a longer version i can eliminate an item of routine maintenance. What cable lengths are others using for the quadrant. The prop cable supplied seem fine.



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rleffler



Joined: 05 Nov 2006
Posts: 680

PostPosted: Wed Nov 03, 2010 1:36 am    Post subject: quadrant throttle and mixture cable lengths Reply with quote

Dave,

I would be interested in the vendor contact info that you got these for under $200 for all. The best I've found is about $150 each.

Thanks,

bob

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler
Back to top
View user's profile Send private message
dave.saylor.aircrafters(a
Guest





PostPosted: Wed Nov 03, 2010 6:59 am    Post subject: quadrant throttle and mixture cable lengths Reply with quote

The vendor is California Push-Pull in Chico, CA. Talk to Frank.

http://www.push-pull.com/

I'm out of the shop today but I'll get you the specific PNs when I get
back. Frank might have them on file. It's the black-sheathed, high
temp cable.

Dave Saylor
AirCrafters
140 Aviation Way
Watsonville, CA 95076
831-722-9141 Shop
831-750-0284 Cell

On Wed, Nov 3, 2010 at 2:31 AM, Bob Leffler <rv(at)thelefflers.com> wrote:
[quote]

Dave,

I would be interested in the vendor contact info that you got these for under $200 for all.  The best I've found is about $150 each.

Thanks,

bob

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group