indigoonlatigo(at)msn.com
Guest
|
 Posted: Tue Nov 09, 2010 6:14 am Post subject: Wheel Fairing Mount maintenance issue - a must-read for fly |
 |
|
I like your thought process in your analyzing the problem. Now we just need someone with access to a machine shop to fabricate these 1/2" diameter steel spacers!!!! Subtracting from the length for the laminated steel washers.
Thanks for the write up.
| Quote: | Date: Sun, 7 Nov 2010 20:25:51 -0600
From: Tim(at)MyRV10.com
To: rv10-list(at)matronics.com
Subject: Wheel Fairing Mount maintenance issue - a must-read for flying -10's
--> RV10-List message posted by: Tim Olson <Tim(at)myrv10.com>
This isn't a completely new issue....I think maybe Bill
DeRouchey reported the same problem a couple years back.
But, I can guarantee that this is going to be an issue that
will eventually affect most every RV-10 built to date, unless
they did something to fix it already.
See my write-up here:
http://www.myrv10.com/N104CD/maintenance/20101107/index.html
Just like the original axle extensions, and nosewheel axle
spacers, this is going to be one of those problems that will
almost definitely affect you....but luckily the problems it
causes aren't nearly as damaging as the other two things.
Check out the write-up though, and if you're not yet
up to section 46, just remember that you're going to want to
do something different with your U-1008 spacers. Maybe if
you're lucky, one of our great aftermarket parts sources will
come up with something before you get this far.
--
======================
>==================
|
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
