tigeryak18t
Joined: 26 Sep 2009 Posts: 233 Location: PARIS FRANCE
|
Posted: Tue Jan 18, 2011 12:15 am Post subject: Electrical problem on a 18T |
|
|
Hy again never one without two.........waiting for the third to come!!!
last week a friend pilot on FALCON900 was in copilot in my 18T.
We landed and afetr shuting down I went out. He stayed and looked at the panel. Then he saw a switch not in the good position so he switched it down....bad luck it should have stayed in the middle position. It was the landing light.
The light itself was not visible but I think there may be a relay somewhere consuming some electricity.
When I came back battery was too low to activate the starting valve....
So I asked a frien owner of a Yak3 to help me with his park group. He came with a strange very sophisticated group pluged on the sector. He chooses the 24 volts, and hold a small button.
When I turned on my battery on the park position it was like all was vibrating.
He said that it was fine and he shoul press the button before I start.
So we did.
I heard two bangs.....
Motor started fine, I switched of the park and passed on the main battery.
Then now, the testing functions of my alarm panels does not work anymore.
I mean the alarm comes on and off (gear, flaps, generator, trim ..) all working fine.
But when I press the testing button...no light is coming on.
Is there a fuse?? arelay???? anything else.
Please I need some help regarding this subject also.
Thanks a lot and good day
--
Didier BLOUZARD
didier.blouzard(at)gmail.com (didier.blouzard(at)gmail.com)
0624243672
[quote][b]
| - The Matronics Yak-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
_________________ Didier Tiger YAK18T
Member of Commemorative Air Force
French Wing |
|