 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
n223rv(at)wolflakeairport Guest
|
Posted: Sun Apr 17, 2011 6:20 am Post subject: FS: Sikaflex 295UV system for bonding RV-10 windows |
|
|
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
 |
greghale
Joined: 10 Jan 2007 Posts: 91 Location: Tulsa, Oklahoma
|
Posted: Sun Apr 17, 2011 11:50 am Post subject: Re: FS: Sikaflex 295UV system for bonding RV-10 windows |
|
|
Don't know what your question was, but if you are thinking about using the Sikaflex system for bonding the windows, you can go to my web page link of how I replaced a windshield using this system. I can highly recommend it for windshield replacement
http://www.nwacaptain.com/windshield.html
It is very easy to clean up by using mineral spirits. Plenty of time to place and adjust the windshield position.
Greg...
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________ Greg Hale rv10 -- N210KH
www.nwacaptain.com |
|
Back to top |
|
 |
n223rv(at)wolflakeairport Guest
|
Posted: Sun Apr 17, 2011 12:43 pm Post subject: FS: Sikaflex 295UV system for bonding RV-10 windows |
|
|
I used this system to install my windows on my RV-10. New from Jamestown Distrubters costs over $113 plus shipping. I have one new unopened tube of the 295 UV adhesive, and well over 1/2 can of the 209D primer and Aktivator. Primer expires in August 2011, Aktivator in September 2011. This is enough to bond in a full set of RV-10 windows.
$75 plus free shipping via FedEx Ground.
-Mike Kraus
[img]cid:0ED27714-14F4-4CB0-9382-74B6219AC025[/img]
Sent from my iPhone
Sent from my iPhone
[quote][b]
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
 |
Kelly McMullen
Joined: 16 Apr 2008 Posts: 1188 Location: Sun Lakes AZ
|
Posted: Sun Apr 17, 2011 12:59 pm Post subject: FS: Sikaflex 295UV system for bonding RV-10 windows |
|
|
Wasn't there some concern whether Sikaflex provided as strong a bond as
Weld-on?
On Sun, Apr 17, 2011 at 12:50 PM, greghale <ghale5224(at)aol.com> wrote:
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________ Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD |
|
Back to top |
|
 |
rv10flyer
Joined: 25 Aug 2009 Posts: 364
|
Posted: Sun Apr 17, 2011 4:40 pm Post subject: Re: FS: Sikaflex 295UV system for bonding RV-10 windows |
|
|
I also have a partial tube of Weld-On 45 and some mixing tubes an RV-10 builder can have for shipping along with borrowing the gun. I want the $102 gun back when finished. Bond strength is 2000 vs 2200 psi for Weld On 10 and the viscosity makes it much easier to fill gaps and almost no runs/clean up afterwards. I don't believe the 200 psi difference will cause me any problems. I tested plexiglass/aluminum/fiberglass samples and it holds better than West epoxy on all three. You need two 13.5 oz cartridges(approx $35/ea) and you will have a least 1/2 tube leftover. Costs are just slightly more than Weld On 10 since you don't have to buy the gun. Get your cartridges/mixing tubes from The Engineer Guy in Atlanta.
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________ Wayne G. |
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|