Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Cable Installation

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

sean(at)stephensville.com
Guest

Posted: Wed Jun 08, 2011 2:00 pm Post subject: Cable Installation

I just received my custom prop and mixture cables from ACS (ordered 

longer for Aerosport panel) and I had a question about installation on 

the panel side.



Obviously make a mount hole big enough for the cable to mount on the 

panel, but as far as sliding the cable through that hole, is it ok to 

remove the rubber boots on the cables so I can slip off the nuts all the 

way to test fit the cable through the mount hole?  It won't fit through 

the hole with the backing nuts in place.



Am I asking the right question or is there a more appropriate way that I 

am not thinking of?  Spent enough on the cables that I didn't want to 

destroy them by removing the rubber boots temporarily.



Thanks,



-Sean #40303 (wiring the panel)

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rv10rob(at)gmail.com
Guest

Posted: Wed Jun 08, 2011 2:10 pm Post subject: Cable Installation

Yes, you need to take off the rubber boots temporarily to remove all the nuts.  Don't worry about destroying the boots--the heat from the engine will do that quickly enough once you're flying.

  

 -Rob

 On Wed, Jun 8, 2011 at 2:56 PM, Sean Stephens <sean(at)stephensville.com (sean(at)stephensville.com)> wrote:

  	  Quote: 	
		  --> RV10-List message posted by: Sean Stephens <sean(at)stephensville.com (sean(at)stephensville.com)>

 

I just received my custom prop and mixture cables from ACS (ordered longer for Aerosport panel) and I had a question about installation on the panel side.



Obviously make a mount hole big enough for the cable to mount on the panel, but as far as sliding the cable through that hole, is it ok to remove the rubber boots on the cables so I can slip off the nuts all the way to test fit the cable through the mount hole?  It won't fit through the hole with the backing nuts in place.

 

Am I asking the right question or is there a more appropriate way that I am not thinking of?  Spent enough on the cables that I didn't want to destroy them by removing the rubber boots temporarily.



Thanks,

 es such as List Un/Subscription,

 www.matronics.com/Navigator?RV10-List" target="_blank">http://www.matronics.com/Navigator?RV10-List

 ronics.com/" target="_blank">http://forums.matronics.com

 Matt Dralle, List Admin.

 =====



	




 

-- 

 Rob Kochman

RV-10 Flying, Phase 1

 Woodinville, WA

 http://kochman.net/N819K



  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

carl.froehlich(at)verizon
Guest

Posted: Wed Jun 08, 2011 3:29 pm Post subject: Cable Installation

Yes - take off the rubber boots and hardware to run the cables.



Carl



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

sean(at)stephensville.com
Guest

Posted: Wed Jun 08, 2011 5:19 pm Post subject: Cable Installation

Thanks everyone...



-Sean



On 6/8/11 6:26 PM, Carl Froehlich wrote:

[quote] 



 Yes - take off the rubber boots and hardware to run the cables.



 Carl



 --

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum