t.j.vanduin(at)gmail.com Guest
|
Posted: Sun Aug 28, 2011 2:29 pm Post subject: Engine mount shock absorbers for Allegro 2000 |
|
|
Fellow Allegro listers,�
Your comments on one or more of my questions below about subject engine mounts
is very much appreciated.
-- �is there any information available about the average service life of these parts?
-- �should they be replaced if the�difference in length between�the upper and the lower mounts ��
� � is�.12 inches?
-- �as the propeller pulls the engine forward, the parts are stress loaded which is not the�
� � usual way these kind of parts are normally loaded. Is the rubber material of this part
� � specially made for the engine mounts of the Allegro? Does it have a different hardness
� � (Shore A) than commercially available parts of this kind?
Thank you for your help in this matter.
Kind regards,
� � � � � � � � � � � Theo�van Duin
� � � � � � � � � � � �Les Cargeots
� � � � � � � � � � � �71550 Cussy en Morvan
� � � � � � � � � � � �France��
[quote][b]
| - The Matronics Allegro-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Allegro-List |
|
|
|