Dick Maddux
 
 
  Joined: 24 Jun 2008 Posts: 516 Location: Milton, Fl
  | 
		
			
				 Posted: Fri Jul 29, 2011 4:15 am    Post subject: 912 model IV engine idle912 model IV engine idle | 
				     | 
			 
			
				
  | 
			 
			
				As I recall (it has been awhile) the rubber tips on the new needles were a  different color than the old ones(red vs black or maybe the other way around)) I  always keep my old parts so was able to reuse the old needles as they were  changed per the time limit on rubber parts BUT appeared to be in good  shape.
   I called Lockwood  after installing the new needles,and  explained the problem I was having with the new needles. They told me that Rotax  had used a stronger spring in the new needles to keep the needles from bouncing  on the seats. Rotax did this in order to prevent what was happing from  happening. Well ,it didn't work in my case so I decided to reinstall the old  needles and that solved the problem. I have also reinstalled the old oil  pressure regulating ball and spring on my engine as their new "cone" had my oil  pressure bouncing all over the place. AND you might safety wire your oil filter  while your at it because I had one of those almost spin off my engine and  Lockwood said that couldn't happen either (it was tightened properly)
   Anyway I digress. Hopefully you haven't chucked your old parts. If  you have, I have an old pair of carbs that MIGHT have the old needles that you  could try. I bought them off of EBAY a  few years ago. I don't know where  you would get new old parts OR if the old needles will solve your problem but  with so many guys here going back to the old needles, I would think that is  a strong possibility.
           Good Luck !
                                 Dick Maddux
                                 Fox 4
                                 Pensacola,Fl 
  [quote][b]
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  |