  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		Martin Pohl
 
  
  Joined: 30 Jan 2006 Posts: 118 Location: CH-8645 Jona SG, Switzerland
  | 
		
			
				 Posted: Wed May 17, 2006 7:05 am    Post subject: Access Panel for Outer Tank Filters | 
				     | 
			 
			
				
  | 
			 
			
				Hi
 
 To all the 4-tank-Zodiac XL-builders: Did you install access panels at the tank outlets for the outer tanks (to get access to the connection and the tank filter)? The space between nose rib #5 and #6 is rather limited (1/2 " approx.)...
 
 On Zenith's plans are only access panels for the inner tanks.
 
 Any advice?
 
 Rgds
 Martin
 
  |  | - The Matronics Zenith-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Zenith-List |  
  |  
 
 
 
 
  _________________ Martin Pohl
 
Zodiac XL QBK
 
8645 Jona, Switzerland
 
http://www.pohltec.ch/ZodiacXL/Main.html | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rsq2424(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Wed May 17, 2006 9:19 am    Post subject: Access Panel for Outer Tank Filters | 
				     | 
			 
			
				
  | 
			 
			
				 	  | Quote: | 	 		   To all the 4-tank-Zodiac XL-builders: Did you install access 
  panels at the tank outlets for the outer tanks (to get access to 
  the connection and the tank filter)? The space between nose 
  rib #5 and #6 is rather limited (1/2 " approx.)...
 
 | 	  
 Yes, I did, and you're right, there's not much room between those ribs. I'm hoping there will be just enough space to get a wrench in there if I ever have to pull the screens out, but haven't tried it yet.
 
 Mike Fortunato
 601XL
 
 		
 ---------------------------------
 How low will we go? Check out Yahoo! Messengers low  PC-to-Phone call rates.
 
  |  | - The Matronics Zenith-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Zenith-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Martin Pohl
 
  
  Joined: 30 Jan 2006 Posts: 118 Location: CH-8645 Jona SG, Switzerland
  | 
		
			
				 Posted: Wed May 17, 2006 11:09 pm    Post subject: Re: Access Panel for Outer Tank Filters | 
				     | 
			 
			
				
  | 
			 
			
				Mike:
 
 I will work on the outer tank connection today. As soon as I have photos of the installation I will post them on my website.
 
 Thx, Martin
 
  |  | - The Matronics Zenith-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Zenith-List |  
  |  
 
 
 
 
  _________________ Martin Pohl
 
Zodiac XL QBK
 
8645 Jona, Switzerland
 
http://www.pohltec.ch/ZodiacXL/Main.html | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Martin Pohl
 
  
  Joined: 30 Jan 2006 Posts: 118 Location: CH-8645 Jona SG, Switzerland
  | 
		
			
				 Posted: Thu May 18, 2006 3:51 am    Post subject: Re: Access Panel for Outer Tank Filters | 
				     | 
			 
			
				
  | 
			 
			
				I just checked the space between nose ribs #5 and #6 (approx. 0.4 inch). It is hardly possible to install an access panel that also gives access to and allows changing of the finger filter. In my opinion it is impossible to change the finger screen at the outer tanks without removing the tank.
 
 Well, how often does it happen that you have to change finger screen filters? It would be probably easier to flush the fuel line/finger screen/outer tank in a reverse way with water or so (for cleaning of the finger screen, after a certain amount of flight time).
 
 Rgds
 Martin
 
  |  | - The Matronics Zenith-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Zenith-List |  
  |  
 
 
 
 
  _________________ Martin Pohl
 
Zodiac XL QBK
 
8645 Jona, Switzerland
 
http://www.pohltec.ch/ZodiacXL/Main.html | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		tonyplane(at)bellsouth.ne Guest
 
 
 
 
 
  | 
		
			
				 Posted: Thu May 18, 2006 5:33 am    Post subject: Access Panel for Outer Tank Filters | 
				     | 
			 
			
				
  | 
			 
			
				I found the below in my "archives".  I also believe I asked Nick at Zenith
 about the lack of an access panel for the outboard aux tanks and received
 the same reply, but could not find his reply.  After studying the access
 cover size, I figured  it was marginal for any maintenance function and
 possibly impossible to use.  I did not install the finger screen access
 covers for either inboard or outboard tanks.
 
 Tony Graziano
 
 Aux tanks, dual sticks/brakes, wing lockers, lights, 6x600
 wheels/tires/brakes/nosefork, aileron trim
 
 601XL, N493TG, 96 hrs..
 
 From: "The Minearts" <smineart(at)kdsi.net>
 Subject: fingerscreen access 601xl
 
  
 Here's 2c worth about providing access to the fingerscreen ( fuel tank
 outlet)
 through the LE skin. If you want to put in the cover with its nutplates as
 shown on the plans, leave a rivet-free zone when drilling the skin to the
 noseribs
 NR-3 & 4. It's not mentioned in the manual, and I had already drilled the
 holes when I discovered it. ZAC doesn't have this on their demo ship, but
 added
 it to meet anticipated LSA requirements. I decided to cut the hole, and made
 a cover to be riveted on with the skin.
 FWIW,
 Steve Mineart, N164SM
 601XL, tail, L-wing 90%
 
  	  | Quote: | 	 		   Time: 08:07:58 AM PST US
  Subject: Access Panel for Outer Tank Filters
  From: "Martin Pohl" <mpohl(at)pohltec.ch>
 
  
 
  Hi
 
  To all the 4-tank-Zodiac XL-builders: Did you install access panels at the
 tank
 | 	  
  	  | Quote: | 	 		   outlets for the outer tanks (to get access to the connection and the tank
 filter)?
 | 	  
  	  | Quote: | 	 		   The space between nose rib #5 and #6 is rather limited (1/2 " approx.)...
 
  On Zenith's plans are only access panels for the inner tanks.
 
  Any advice?
 
  Rgds
  Martin
 
  --------
  Martin Pohl
  Zodiac XL QBK
  8645 Jona, Switzerland
 
 
 | 	 
 
 
  |  | - The Matronics Zenith-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Zenith-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |