 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
slandwcmitch(at)yahoo.com
Guest
|
 Posted: Tue Oct 04, 2011 10:24 am Post subject: Zenith-List Digest: 7 Msgs - 10/03/11 |
 |
|
William is deceased & we would like to retain this email but be deleted from these mailings. How do we go about doing that? Mitchell family
From: Zenith-List Digest Server <zenith-list(at)matronics.com>
To: Zenith-List Digest List <zenith-list-digest(at)matronics.com>
Sent: Tuesday, October 4, 2011 12:00 AM
Subject: Zenith-List Digest: 7 Msgs - 10/03/11
*
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Zenith-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2011-10-03&Archive=Zenith
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2011-10-03&Archive=Zenith
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Zenith-List Digest Archive
---
Total Messages Posted Mon 10/03/11: 7
----------------------------------------------------------
Today's Message Index:
----------------------
1. 04:38 AM - 601 XL bearing bloc material (Michel Therrien)
2. 05:09 AM - Re: 601 XL bearing bloc material (Paul Mulwitz)
3. 06:53 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
4. 07:40 AM - Re: [Probable Spam] 601 XL bearing bloc material (Malcolm Hunt)
5. 09:31 AM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
6. 10:26 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
7. 08:26 PM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
________________________________ Message 1 _____________________________________
Time: 04:38:17 AM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: 601 XL bearing bloc material
Hello group,=0A=C2-=0AAs part orf my 601 renovation project, I want to re
place the lower nose wheel fork bearing with the newer style 601 XL plastic
bloc.=C2- I would like to know what material is mandated (delrin, nylon,
acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AM
ichel=0A=C2-=0Ado not archive=0A=0A----------------------------=0AMichel
Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pag
es.infinit.net/mthobby=0A=0A=0A________________________________=0AFrom: Lar
ry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: Zenith-List <zenith-list(at)matroni
cs.com>=0ASent: Wednesday, September 28, 2011 2:46:58 PM=0ASubject: Zenith-
List: access panel drawing =0A=0A=0AHi guys,=0AI=99ve had a few peopl
e ask about a drawing for the inspection panels I use on my 601HDS. =0AThe
link below will get you to the drawing on my site and clicking the drawing
at the bottom =0Aof the page will get you to a larger image that=99s
printable. The panels serve my plane well=0Aand have never given any diffic
ulty. =C2-If you want to make a set of these, the drawing is =0Aa good gu
ide.=0A=C2-=0Ahttp://www.macsmachine.com/html/winginsppanels.htm=0A=C2-
=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarland=C2- 601HDS at www.m
=====================
________________________________ Message 2 _____________________________________
Time: 05:09:52 AM PST US
From: Paul Mulwitz <psm(at)att.net (psm(at)att.net)>
Subject: Re: 601 XL bearing bloc material
Hi Michael,
I'm not sure whether mine is the old or new stuff, but I think it is
Nyloil -- oil impregnated nylon.
Paul
XL in flight test
On 10/3/2011 4:35 AM, Michel Therrien wrote:
| Quote: | Hello group,
As part orf my 601 renovation project, I want to replace the lower
nose wheel fork bearing with the newer style 601 XL plastic bloc. I
would like to know what material is mandated (delrin, nylon, acetal,
UHMWE?) and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
*From:* Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
*To:* Zenith-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>
*Sent:* Wednesday, September 28, 2011 2:46:58 PM
*Subject:* Zenith-List: access panel drawing
Hi guys,
Ive had a few people ask about a drawing for the inspection panels I
use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image thats printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
*
el=nofollow target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
*
*
*
|
________________________________ Message 3 _____________________________________
Time: 06:53:51 AM PST US
From: "Larry McFarland" <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
________________________________ Message 4 _____________________________________
Time: 07:40:30 AM PST US
From: "Malcolm Hunt" <malcolmhunt(at)mha1.fsbusiness.co.uk (malcolmhunt(at)mha1.fsbusiness.co.uk)>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
Hi Michael
The plans call up Nyoil (at) 1.5=9D thick, can be obtained in England
so should be easy with you.
Nylon is not the easiest to work but the part from the factory is
expensive.
Hope this helps
Malcolm Hunt
Plans builder in England
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Larry
McFarland
Sent: 03 October 2011 14:51
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Zenith-List
http://forums.matronics.com
http://www.matronics.com/contribution
__________ Information from ESET Smart Security, version of virus
signature database 6512 (20111003) __________
The message was checked by ESET Smart Security.
________________________________ Message 5 _____________________________________
Time: 09:31:00 AM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed tha
t my gear leg got a bit of wear (0.003") from movement over the=C2-6 year
s that the plane flew (probably constant rudder movement).=C2- I would li
ke to do away of the aluminum contact on the nose wheel... did you make it
so that contact is only on the plastic part?=C2- =0A=C2-=0AThanks!=0A
=C2-=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrie
n CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infi
nit.net/mthobby=0A=0A=0A________________________________=0AFrom: Larry McFa
rland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASent: Monda
y, October 3, 2011 9:50:31 AM=0ASubject: RE: [Probable Spam] 6
01 XL bearing bloc material=0A=0A=0AHI Michel,=0AI=99m using UHMWE at
3/8-inch thickness that replaced Nylon that absorbed water.=C2- =0ANot s
o expensive and easy to work. =0AReasonable Source:=C2-=C2- http://www.
k-mac-plastics.net/index.htm =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601
HDS at www.macsmachine.com=0A=C2-=0AFrom:owner-zenith-list-server(at)matroni
cs.com [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien=0ASent: Monday, October 03, 2011 6:35 AM=0ATo: zenith-list(at)matroni
cs.com=0ASubject: [Probable Spam] 601 XL bearing bloc material
=0A=C2-=0AHello group,=0A=C2-=0AAs part orf my 601 renovation project,
I want to replace the lower nose wheel fork bearing with the newer style 60
1 XL plastic bloc.=C2- I would like to know what material is mandated (de
lrin, nylon, acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!
=0A=C2-=0AMichel=0A=C2-=0Ado not archive=0A=C2-=0A-------------------
---------=0AMichel Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com
/ch601=0Ahttp://pages.infinit.net/mthobby=0AFrom:Larry McFarland <larry(at)mac
smachine.com>=0ATo: Zenith-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>=0ASent: Wednesd
ay, September 28, 2011 2:46:58 PM=0ASubject: access panel draw
ing =0AHi guys,=0AI=99ve had a few people ask about a drawing for the
inspection panels I use on my 601HDS. =0AThe link below will get you to th
e drawing on my site and clicking the drawing at the bottom =0Aof the page
will get you to a larger image that=99s printable. The panels serve m
y plane well=0Aand have never given any difficulty. =C2-If you want to ma
ke a set of these, the drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.ma
csmachine.com/html/winginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A
=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2
-=0A=C2-=0Ael=nofollow target=_blank>http://www.matronics.com/Navig
ator?Zenith-List=0Aet=_blank>http://forums.matronics.com=0Allow target=
_blank>http://www.matronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A
=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp://forums.mat
========
________________________________ Message 6 _____________________________________
Time: 10:26:12 AM PST US
From: "Larry McFarland" <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Subject: RE: [Probable Spam] Zenith-List: 601 XL bearing bloc material
Yes Michel,
I noticed wear in the same fore and aft areas and made adjustments to
keep the tube
| Quote: | From being in contact with the aluminum. With the UHMWE, that works
rather well.
|
Get a good fit with the bearing plastic and then remove a little
aluminum for clearance.
It=99ll hold.
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 11:28 AM
Subject: Re: [Probable Spam] Zenith-List: 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed
that my gear leg got a bit of wear (0.003") from movement over the 6
years that the plane flew (probably constant rudder movement). I would
like to do away of the aluminum contact on the nose wheel... did you
make it so that contact is only on the plastic part?
Thanks!
Michel
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Monday, October 3, 2011 9:50:31 AM
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com <http://forums.matronics.com/>
llow target=_blank>http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Zenith-List
http://forums.matronics.com
http://www.matronics.com/contribution
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
________________________________ Message 7 _____________________________________
Time: 08:26:16 PM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I noticed different varieties of Nyloil... there is the green one and then,
the MDX (gray or blue).=C2- Are they interchangeable?=C2- It appears t
hat the kit part is the grey Nyloil (that is filled with Moly...).=0A=C2-
=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrien CH60
1-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infinit.ne
t/mthobby=0A=0A=0A________________________________=0AFrom: Malcolm Hunt <ma
lcolmhunt(at)mha1.fsbusiness.co.uk (lcolmhunt(at)mha1.fsbusiness.co.uk)>=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASent: Mo
nday, October 3, 2011 10:37:46 AM=0ASubject: RE: [Probable Spam] Zenith-Lis
t: 601 XL bearing bloc material=0A=0A=0AHi Michael=0A=C2-=0AThe plans cal
l up Nyoil (at) 1.5=9D thick, can be obtained in England so should be ea
sy with you.=0A=C2-=0ANylon is not the easiest to work but the part from
the factory is expensive.=0A=C2-=0AHope this helps=0A=C2-=0AMalcolm Hun
t=0APlans builder in England=0A=C2-=0AFrom:owner-zenith-list-server(at)matro
nics.com [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Larry
McFarland=0ASent: 03 October 2011 14:51=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0A
Subject: RE: [Probable Spam] 601 XL bearing bloc material=0A
=C2-=0AHI Michel,=0AI=99m using UHMWE at 3/8-inch thickness that re
placed Nylon that absorbed water.=C2- =0ANot so expensive and easy to wor
k. =0AReasonable Source:=C2-=C2- http://www.k-mac-plastics.net/index.ht
m =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com
=0A=C2-=0AFrom:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com) [mailto:owner-zenit
h-list-server(at)matronics.com (h-list-server(at)matronics.com)] On Behalf Of Michel Therrien=0ASent: Monday, O
ctober 03, 2011 6:35 AM=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASubject: [Probabl
e Spam] Zenith-List: 601 XL bearing bloc material=0A=C2-=0AHello group,
=0A=C2-=0AAs part orf my 601 renovation project, I want to replace the lo
wer nose wheel fork bearing with the newer style 601 XL plastic bloc.=C2-
I would like to know what material is mandated (delrin, nylon, acetal, UHM
WE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AMichel=0A=C2
-=0Ado not archive=0A=C2-=0A----------------------------=0AMichel Therr
ien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.in
finit.net/mthobby=0AFrom:Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: Zeni
th-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>=0ASent: Wednesday, September 28, 2011 2
:46:58 PM=0ASubject: access panel drawing =0AHi guys,=0AI
=99ve had a few people ask about a drawing for the inspection panels I u
se on my 601HDS. =0AThe link below will get you to the drawing on my site a
nd clicking the drawing at the bottom =0Aof the page will get you to a larg
er image that=99s printable. The panels serve my plane well=0Aand hav
e never given any difficulty. =C2-If you want to make a set of these, the
drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.macsmachine.com/html/win
ginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarla
nd=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2-=0A=C2-=0Ael=no
follow target=_blank>http://www.matronics.com/Navigator?Zenith-List=0Aet
=_blank>http://forums.matronics.com=0Allow target=_blank>http://www.mat
ronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0Ahttp
://www.matronics.com/Navigator?Zenith-List=0A=C2-=0Ahttp://forums.matroni
cs.com=0A=C2-=0Ahttp://www.matronics.com/contribution=0A=C2-=0A=C2-
=0A=C2-=0A=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp:
//forums.matronics.com=0Ahttp://www.matronics.com/contribution=0A=C2-=0A
=0A=0A__________ Information from ESET Smart Security, version of virus sig
nature database 6512 (20111003) __________=0A=0AThe message was checked by
ESET Smart Security.=0A=0A=0Ahttp:/ics.com" target=_blank p; &nhttp://w=======================
[quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
 |
steve.freeman(at)syntaxds
Guest
|
| Posted: Tue Oct 04, 2011 10:54 am Post subject: Zenith-List Digest: 7 Msgs - 10/03/11 |
|
|
If I remember correctly – all you need to do is send an email to the list with UNSUBSCRIBE in the subject and the body of the email.
List – please correct me if am wrong.
Steve
From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Bill Shirley Mitchell
Sent: Tuesday, October 04, 2011 11:22 AM
To: zenith-list(at)matronics.com
Subject: Re: Zenith-List Digest: 7 Msgs - 10/03/11
William is deceased & we would like to retain this email but be deleted from these mailings. How do we go about doing that?
Mitchell family
From: Zenith-List Digest Server <zenith-list(at)matronics.com>
To: Zenith-List Digest List <zenith-list-digest(at)matronics.com>
Sent: Tuesday, October 4, 2011 12:00 AM
Subject: Zenith-List Digest: 7 Msgs - 10/03/11
*
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Zenith-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2011-10-03&Archive=Zenith
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2011-10-03&Archive=Zenith
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Zenith-List Digest Archive
---
Total Messages Posted Mon 10/03/11: 7
----------------------------------------------------------
Today's Message Index:
----------------------
1. 04:38 AM - 601 XL bearing bloc material (Michel Therrien)
2. 05:09 AM - Re: 601 XL bearing bloc material (Paul Mulwitz)
3. 06:53 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
4. 07:40 AM - Re: [Probable Spam] 601 XL bearing bloc material (Malcolm Hunt)
5. 09:31 AM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
6. 10:26 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
7. 08:26 PM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
________________________________ Message 1 _____________________________________
Time: 04:38:17 AM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: 601 XL bearing bloc material
Hello group,=0A=C2-=0AAs part orf my 601 renovation project, I want to re
place the lower nose wheel fork bearing with the newer style 601 XL plastic
bloc.=C2- I would like to know what material is mandated (delrin, nylon,
acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AM
ichel=0A=C2-=0Ado not archive=0A=0A----------------------------=0AMichel
Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pag
es.infinit.net/mthobby=0A=0A=0A________________________________=0AFrom: Lar
ry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: Zenith-List <zenith-list(at)matroni
cs.com>=0ASent: Wednesday, September 28, 2011 2:46:58 PM=0ASubject: Zenith-
List: access panel drawing =0A=0A=0AHi guys,=0AI=99ve had a few peopl
e ask about a drawing for the inspection panels I use on my 601HDS. =0AThe
link below will get you to the drawing on my site and clicking the drawing
at the bottom =0Aof the page will get you to a larger image that=99s
printable. The panels serve my plane well=0Aand have never given any diffic
ulty. =C2-If you want to make a set of these, the drawing is =0Aa good gu
ide.=0A=C2-=0Ahttp://www.macsmachine.com/html/winginsppanels.htm=0A=C2-
=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarland=C2- 601HDS at www.m
=====================
________________________________ Message 2 _____________________________________
Time: 05:09:52 AM PST US
From: Paul Mulwitz <psm(at)att.net (psm(at)att.net)>
Subject: Re: 601 XL bearing bloc material
Hi Michael,
I'm not sure whether mine is the old or new stuff, but I think it is
Nyloil -- oil impregnated nylon.
Paul
XL in flight test
On 10/3/2011 4:35 AM, Michel Therrien wrote:
| Quote: | Hello group,
As part orf my 601 renovation project, I want to replace the lower
nose wheel fork bearing with the newer style 601 XL plastic bloc. I
would like to know what material is mandated (delrin, nylon, acetal,
UHMWE?) and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
*From:* Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
*To:* Zenith-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>
*Sent:* Wednesday, September 28, 2011 2:46:58 PM
*Subject:* access panel drawing
Hi guys,
Ive had a few people ask about a drawing for the inspection panels I
use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image thats printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
*
el=nofollow target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
*
*
*
|
________________________________ Message 3 _____________________________________
Time: 06:53:51 AM PST US
From: "Larry McFarland" <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
________________________________ Message 4 _____________________________________
Time: 07:40:30 AM PST US
From: "Malcolm Hunt" <malcolmhunt(at)mha1.fsbusiness.co.uk (malcolmhunt(at)mha1.fsbusiness.co.uk)>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
Hi Michael
The plans call up Nyoil (at) 1.5=9D thick, can be obtained in England
so should be easy with you.
Nylon is not the easiest to work but the part from the factory is
expensive.
Hope this helps
Malcolm Hunt
Plans builder in England
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Larry
McFarland
Sent: 03 October 2011 14:51
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Zenith-List
http://forums.matronics.com
http://www.matronics.com/contribution
__________ Information from ESET Smart Security, version of virus
signature database 6512 (20111003) __________
The message was checked by ESET Smart Security.
________________________________ Message 5 _____________________________________
Time: 09:31:00 AM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed tha
t my gear leg got a bit of wear (0.003") from movement over the=C2-6 year
s that the plane flew (probably constant rudder movement).=C2- I would li
ke to do away of the aluminum contact on the nose wheel... did you make it
so that contact is only on the plastic part?=C2- =0A=C2-=0AThanks!=0A
=C2-=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrie
n CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infi
nit.net/mthobby=0A=0A=0A________________________________=0AFrom: Larry McFa
rland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASent: Monda
y, October 3, 2011 9:50:31 AM=0ASubject: RE: [Probable Spam] 6
01 XL bearing bloc material=0A=0A=0AHI Michel,=0AI=99m using UHMWE at
3/8-inch thickness that replaced Nylon that absorbed water.=C2- =0ANot s
o expensive and easy to work. =0AReasonable Source:=C2-=C2- http://www.
k-mac-plastics.net/index.htm =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601
HDS at www.macsmachine.com=0A=C2-=0AFrom:owner-zenith-list-server(at)matroni
cs.com [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien=0ASent: Monday, October 03, 2011 6:35 AM=0ATo: zenith-list(at)matroni
cs.com=0ASubject: [Probable Spam] 601 XL bearing bloc material
=0A=C2-=0AHello group,=0A=C2-=0AAs part orf my 601 renovation project,
I want to replace the lower nose wheel fork bearing with the newer style 60
1 XL plastic bloc.=C2- I would like to know what material is mandated (de
lrin, nylon, acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!
=0A=C2-=0AMichel=0A=C2-=0Ado not archive=0A=C2-=0A-------------------
---------=0AMichel Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com
/ch601=0Ahttp://pages.infinit.net/mthobby=0AFrom:Larry McFarland <larry(at)mac
smachine.com>=0ATo: Zenith-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>=0ASent: Wednesd
ay, September 28, 2011 2:46:58 PM=0ASubject: access panel draw
ing =0AHi guys,=0AI=99ve had a few people ask about a drawing for the
inspection panels I use on my 601HDS. =0AThe link below will get you to th
e drawing on my site and clicking the drawing at the bottom =0Aof the page
will get you to a larger image that=99s printable. The panels serve m
y plane well=0Aand have never given any difficulty. =C2-If you want to ma
ke a set of these, the drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.ma
csmachine.com/html/winginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A
=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2
-=0A=C2-=0Ael=nofollow target=_blank>http://www.matronics.com/Navig
ator?Zenith-List=0Aet=_blank>http://forums.matronics.com=0Allow target=
_blank>http://www.matronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A
=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp://forums.mat
========
________________________________ Message 6 _____________________________________
Time: 10:26:12 AM PST US
From: "Larry McFarland" <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
Yes Michel,
I noticed wear in the same fore and aft areas and made adjustments to
keep the tube
| Quote: | From being in contact with the aluminum. With the UHMWE, that works
rather well.
|
Get a good fit with the bearing plastic and then remove a little
aluminum for clearance.
It=99ll hold.
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 11:28 AM
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed
that my gear leg got a bit of wear (0.003") from movement over the 6
years that the plane flew (probably constant rudder movement). I would
like to do away of the aluminum contact on the nose wheel... did you
make it so that contact is only on the plastic part?
Thanks!
Michel
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Monday, October 3, 2011 9:50:31 AM
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com <http://forums.matronics.com/>
llow target=_blank>http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Zenith-List
http://forums.matronics.com
http://www.matronics.com/contribution
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
________________________________ Message 7 _____________________________________
Time: 08:26:16 PM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I noticed different varieties of Nyloil... there is the green one and then,
the MDX (gray or blue).=C2- Are they interchangeable?=C2- It appears t
hat the kit part is the grey Nyloil (that is filled with Moly...).=0A=C2-
=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrien CH60
1-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infinit.ne
t/mthobby=0A=0A=0A________________________________=0AFrom: Malcolm Hunt <ma
lcolmhunt(at)mha1.fsbusiness.co.uk (lcolmhunt(at)mha1.fsbusiness.co.uk)>=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASent: Mo
nday, October 3, 2011 10:37:46 AM=0ASubject: RE: [Probable Spam] Zenith-Lis
t: 601 XL bearing bloc material=0A=0A=0AHi Michael=0A=C2-=0AThe plans cal
l up Nyoil (at) 1.5=9D thick, can be obtained in England so should be ea
sy with you.=0A=C2-=0ANylon is not the easiest to work but the part from
the factory is expensive.=0A=C2-=0AHope this helps=0A=C2-=0AMalcolm Hun
t=0APlans builder in England=0A=C2-=0AFrom:owner-zenith-list-server(at)matro
nics.com [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Larry
McFarland=0ASent: 03 October 2011 14:51=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0A
Subject: RE: [Probable Spam] 601 XL bearing bloc material=0A
=C2-=0AHI Michel,=0AI=99m using UHMWE at 3/8-inch thickness that re
placed Nylon that absorbed water.=C2- =0ANot so expensive and easy to wor
k. =0AReasonable Source:=C2-=C2- http://www.k-mac-plastics.net/index.ht
m =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com
=0A=C2-=0AFrom:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com) [mailto:owner-zenit
h-list-server(at)matronics.com (h-list-server(at)matronics.com)] On Behalf Of Michel Therrien=0ASent: Monday, O
ctober 03, 2011 6:35 AM=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASubject: [Probabl
e Spam] 601 XL bearing bloc material=0A=C2-=0AHello group,
=0A=C2-=0AAs part orf my 601 renovation project, I want to replace the lo
wer nose wheel fork bearing with the newer style 601 XL plastic bloc.=C2-
I would like to know what material is mandated (delrin, nylon, acetal, UHM
WE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AMichel=0A=C2
-=0Ado not archive=0A=C2-=0A----------------------------=0AMichel Therr
ien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.in
finit.net/mthobby=0AFrom:Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: Zeni
th-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>=0ASent: Wednesday, September 28, 2011 2
:46:58 PM=0ASubject: access panel drawing =0AHi guys,=0AI
=99ve had a few people ask about a drawing for the inspection panels I u
se on my 601HDS. =0AThe link below will get you to the drawing on my site a
nd clicking the drawing at the bottom =0Aof the page will get you to a larg
er image that=99s printable. The panels serve my plane well=0Aand hav
e never given any difficulty. =C2-If you want to make a set of these, the
drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.macsmachine.com/html/win
ginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarla
nd=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2-=0A=C2-=0Ael=no
follow target=_blank>http://www.matronics.com/Navigator?Zenith-List=0Aet
=_blank>http://forums.matronics.com=0Allow target=_blank>http://www.mat
ronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0Ahttp
://www.matronics.com/Navigator?Zenith-List=0A=C2-=0Ahttp://forums.matroni
cs.com=0A=C2-=0Ahttp://www.matronics.com/contribution=0A=C2-=0A=C2-
=0A=C2-=0A=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp:
//forums.matronics.com=0Ahttp://www.matronics.com/contribution=0A=C2-=0A
=0A=0A__________ Information from ESET Smart Security, version of virus sig
nature database 6512 (20111003) __________=0A=0AThe message was checked by
ESET Smart Security.=0A=0A=0Ahttp:/ics.com" target=_blank p; &nhttp://w=======================
012345678
[quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
carlossa52(at)gmail.com
Guest
|
| Posted: Tue Oct 04, 2011 11:46 am Post subject: Zenith-List Digest: 7 Msgs - 10/03/11 |
|
|
Not quite, Steve - you need to go to http://www.matronics.com/subscription
Carlos
On 4 October 2011 14:51, Steve Freeman <steve.freeman(at)syntaxds.com (steve.freeman(at)syntaxds.com)> wrote:
[quote]
If I remember correctly – all you need to do is send an email to the list with UNSUBSCRIBE in the subject and the body of the email.
List – please correct me if am wrong.
Steve
[b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
bill.pagan(at)yahoo.com
Guest
|
| Posted: Tue Oct 04, 2011 11:54 am Post subject: Zenith-List Digest: 7 Msgs - 10/03/11 |
|
|
to unsubscribe go here: http://www.matronics.com/subscription/ pretty self explanatory from there.
Sorry to hear of William's passing. Condolences to the family.
Bill Pagán
From: Steve Freeman <steve.freeman(at)syntaxds.com>
To: zenith-list(at)matronics.com
Sent: Tuesday, October 4, 2011 2:51 PM
Subject: RE: Re: Zenith-List Digest: 7 Msgs - 10/03/11
If I remember correctly – all you need to do is send an email to the list with UNSUBSCRIBE in the subject and the body of the email.
List – please correct me if am wrong.
Steve
From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Bill Shirley Mitchell
Sent: Tuesday, October 04, 2011 11:22 AM
To: zenith-list(at)matronics.com
Subject: Re: Zenith-List Digest: 7 Msgs - 10/03/11
William is deceased & we would like to retain this email but be deleted from these mailings. How do we go about doing that?
Mitchell family
From: Zenith-List Digest Server <zenith-list(at)matronics.com>
To: Zenith-List Digest List <zenith-list-digest(at)matronics.com>
Sent: Tuesday, October 4, 2011 12:00 AM
Subject: Zenith-List Digest: 7 Msgs - 10/03/11
*
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Zenith-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2011-10-03&Archive=Zenith
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2011-10-03&Archive=Zenith
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Zenith-List Digest Archive
---
Total Messages Posted Mon 10/03/11: 7
----------------------------------------------------------
Today's Message Index:
----------------------
1. 04:38 AM - 601 XL bearing bloc material (Michel Therrien)
2. 05:09 AM - Re: 601 XL bearing bloc material (Paul Mulwitz)
3. 06:53 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
4. 07:40 AM - Re: [Probable Spam] 601 XL bearing bloc material (Malcolm Hunt)
5. 09:31 AM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
6. 10:26 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
7. 08:26 PM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
________________________________ Message 1 _____________________________________
Time: 04:38:17 AM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: Zenith-List: 601 XL bearing bloc material
Hello group,=0A=C2-=0AAs part orf my 601 renovation project, I want to re
place the lower nose wheel fork bearing with the newer style 601 XL plastic
bloc.=C2- I would like to know what material is mandated (delrin, nylon,
acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AM
ichel=0A=C2-=0Ado not archive=0A=0A----------------------------=0AMichel
Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pag
es.infinit.net/mthobby=0A=0A=0A________________________________=0AFrom: Lar
ry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: Zenith-List <zenith-list(at)matroni
cs.com>=0ASent: Wednesday, September 28, 2011 2:46:58 PM=0ASubject: Zenith-
List: access panel drawing =0A=0A=0AHi guys,=0AI=99ve had a few peopl
e ask about a drawing for the inspection panels I use on my 601HDS. =0AThe
link below will get you to the drawing on my site and clicking the drawing
at the bottom =0Aof the page will get you to a larger image that=99s
printable. The panels serve my plane well=0Aand have never given any diffic
ulty. =C2-If you want to make a set of these, the drawing is =0Aa good gu
ide.=0A=C2-=0Ahttp://www.macsmachine.com/html/winginsppanels.htm=0A=C2-
=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarland=C2- 601HDS at www.m
=====================
________________________________ Message 2 _____________________________________
Time: 05:09:52 AM PST US
From: Paul Mulwitz <psm(at)att.net (psm(at)att.net)>
Subject: Re: 601 XL bearing bloc material
Hi Michael,
I'm not sure whether mine is the old or new stuff, but I think it is
Nyloil -- oil impregnated nylon.
Paul
XL in flight test
On 10/3/2011 4:35 AM, Michel Therrien wrote:
| Quote: | Hello group,
As part orf my 601 renovation project, I want to replace the lower
nose wheel fork bearing with the newer style 601 XL plastic bloc. I
would like to know what material is mandated (delrin, nylon, acetal,
UHMWE?) and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
*From:* Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
*To:* Zenith-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>
*Sent:* Wednesday, September 28, 2011 2:46:58 PM
*Subject:* Zenith-List: access panel drawing
Hi guys,
Ive had a few people ask about a drawing for the inspection panels I
use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image thats printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
*
el=nofollow target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
*
*
*
|
________________________________ Message 3 _____________________________________
Time: 06:53:51 AM PST US
From: "Larry McFarland" <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
________________________________ Message 4 _____________________________________
Time: 07:40:30 AM PST US
From: "Malcolm Hunt" <malcolmhunt(at)mha1.fsbusiness.co.uk (malcolmhunt(at)mha1.fsbusiness.co.uk)>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
Hi Michael
The plans call up Nyoil (at) 1.5=9D thick, can be obtained in England
so should be easy with you.
Nylon is not the easiest to work but the part from the factory is
expensive.
Hope this helps
Malcolm Hunt
Plans builder in England
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Larry
McFarland
Sent: 03 October 2011 14:51
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Zenith-List
http://forums.matronics.com
http://www.matronics.com/contribution
__________ Information from ESET Smart Security, version of virus
signature database 6512 (20111003) __________
The message was checked by ESET Smart Security.
________________________________ Message 5 _____________________________________
Time: 09:31:00 AM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed tha
t my gear leg got a bit of wear (0.003") from movement over the=C2-6 year
s that the plane flew (probably constant rudder movement).=C2- I would li
ke to do away of the aluminum contact on the nose wheel... did you make it
so that contact is only on the plastic part?=C2- =0A=C2-=0AThanks!=0A
=C2-=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrie
n CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infi
nit.net/mthobby=0A=0A=0A________________________________=0AFrom: Larry McFa
rland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASent: Monda
y, October 3, 2011 9:50:31 AM=0ASubject: RE: [Probable Spam] 6
01 XL bearing bloc material=0A=0A=0AHI Michel,=0AI=99m using UHMWE at
3/8-inch thickness that replaced Nylon that absorbed water.=C2- =0ANot s
o expensive and easy to work. =0AReasonable Source:=C2-=C2- http://www.
k-mac-plastics.net/index.htm =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601
HDS at www.macsmachine.com=0A=C2-=0AFrom:owner-zenith-list-server(at)matroni
cs.com [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien=0ASent: Monday, October 03, 2011 6:35 AM=0ATo: zenith-list(at)matroni
cs.com=0ASubject: [Probable Spam] 601 XL bearing bloc material
=0A=C2-=0AHello group,=0A=C2-=0AAs part orf my 601 renovation project,
I want to replace the lower nose wheel fork bearing with the newer style 60
1 XL plastic bloc.=C2- I would like to know what material is mandated (de
lrin, nylon, acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!
=0A=C2-=0AMichel=0A=C2-=0Ado not archive=0A=C2-=0A-------------------
---------=0AMichel Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com
/ch601=0Ahttp://pages.infinit.net/mthobby=0AFrom:Larry McFarland <larry(at)mac
smachine.com>=0ATo: Zenith-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>=0ASent: Wednesd
ay, September 28, 2011 2:46:58 PM=0ASubject: access panel draw
ing =0AHi guys,=0AI=99ve had a few people ask about a drawing for the
inspection panels I use on my 601HDS. =0AThe link below will get you to th
e drawing on my site and clicking the drawing at the bottom =0Aof the page
will get you to a larger image that=99s printable. The panels serve m
y plane well=0Aand have never given any difficulty. =C2-If you want to ma
ke a set of these, the drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.ma
csmachine.com/html/winginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A
=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2
-=0A=C2-=0Ael=nofollow target=_blank>http://www.matronics.com/Navig
ator?Zenith-List=0Aet=_blank>http://forums.matronics.com=0Allow target=
_blank>http://www.matronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A
=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp://forums.mat
========
________________________________ Message 6 _____________________________________
Time: 10:26:12 AM PST US
From: "Larry McFarland" <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Subject: RE: [Probable Spam] Zenith-List: 601 XL bearing bloc material
Yes Michel,
I noticed wear in the same fore and aft areas and made adjustments to
keep the tube
| Quote: | From being in contact with the aluminum. With the UHMWE, that works
rather well.
|
Get a good fit with the bearing plastic and then remove a little
aluminum for clearance.
It=99ll hold.
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 11:28 AM
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed
that my gear leg got a bit of wear (0.003") from movement over the 6
years that the plane flew (probably constant rudder movement). I would
like to do away of the aluminum contact on the nose wheel... did you
make it so that contact is only on the plastic part?
Thanks!
Michel
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Monday, October 3, 2011 9:50:31 AM
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<http://www.macsmachine.com/>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com <http://forums.matronics.com/>
llow target=_blank>http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Zenith-List
http://forums.matronics.com
http://www.matronics.com/contribution
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
________________________________ Message 7 _____________________________________
Time: 08:26:16 PM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I noticed different varieties of Nyloil... there is the green one and then,
the MDX (gray or blue).=C2- Are they interchangeable?=C2- It appears t
hat the kit part is the grey Nyloil (that is filled with Moly..).=0A=C2-
=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrien CH60
1-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infinit.ne
t/mthobby=0A=0A=0A________________________________=0AFrom: Malcolm Hunt <ma
lcolmhunt(at)mha1.fsbusiness.co.uk (lcolmhunt(at)mha1.fsbusiness.co.uk)>=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASent: Mo
nday, October 3, 2011 10:37:46 AM=0ASubject: RE: [Probable Spam] Zenith-Lis
t: 601 XL bearing bloc material=0A=0A=0AHi Michael=0A=C2-=0AThe plans cal
l up Nyoil (at) 1.5=9D thick, can be obtained in England so should be ea
sy with you.=0A=C2-=0ANylon is not the easiest to work but the part from
the factory is expensive.=0A=C2-=0AHope this helps=0A=C2-=0AMalcolm Hun
t=0APlans builder in England=0A=C2-=0AFrom:owner-zenith-list-server(at)matro
nics.com [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Larry
McFarland=0ASent: 03 October 2011 14:51=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0A
Subject: RE: [Probable Spam] 601 XL bearing bloc material=0A
=C2-=0AHI Michel,=0AI=99m using UHMWE at 3/8-inch thickness that re
placed Nylon that absorbed water.=C2- =0ANot so expensive and easy to wor
k. =0AReasonable Source:=C2-=C2- http://www.k-mac-plastics.net/index.ht
m =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com
=0A=C2-=0AFrom:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com) [mailto:owner-zenit
h-list-server(at)matronics.com (h-list-server(at)matronics.com)] On Behalf Of Michel Therrien=0ASent: Monday, O
ctober 03, 2011 6:35 AM=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASubject: [Probabl
e Spam] 601 XL bearing bloc material=0A=C2-=0AHello group,
=0A=C2-=0AAs part orf my 601 renovation project, I want to replace the lo
wer nose wheel fork bearing with the newer style 601 XL plastic bloc.=C2-
I would like to know what material is mandated (delrin, nylon, acetal, UHM
WE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AMichel=0A=C2
-=0Ado not archive=0A=C2-=0A----------------------------=0AMichel Therr
ien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.in
finit.net/mthobby=0AFrom:Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>=0ATo: Zeni
th-List <zenith-list(at)matronics.com (zenith-list(at)matronics.com)>=0ASent: Wednesday, September 28, 2011 2
:46:58 PM=0ASubject: access panel drawing =0AHi guys,=0AI
=99ve had a few people ask about a drawing for the inspection panels I u
se on my 601HDS. =0AThe link below will get you to the drawing on my site a
nd clicking the drawing at the bottom =0Aof the page will get you to a larg
er image that=99s printable. The panels serve my plane well=0Aand hav
e never given any difficulty. =C2-If you want to make a set of these, the
drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.macsmachine.com/html/win
ginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarla
nd=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2-=0A=C2-=0Ael=no
follow target=_blank>http://www.matronics.com/Navigator?Zenith-List=0Aet
=_blank>http://forums.matronics.com=0Allow target=_blank>http://www.mat
ronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0Ahttp
://www.matronics.com/Navigator?Zenith-List=0A=C2-=0Ahttp://forums.matroni
cs.com=0A=C2-=0Ahttp://www.matronics.com/contribution=0A=C2-=0A=C2-
=0A=C2-=0A=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp:
//forums.matronics.com=0Ahttp://www.matronics.com/contribution=0A=C2-=0A
=0A=0A__________ Information from ESET Smart Security, version of virus sig
nature database 6512 (20111003) __________=0A=0AThe message was checked by
ESET Smart Security.=0A=0A=0Ahttp:/ics.com" target=_blank p; &nhttp://w=======================
012345678
9[/u][/b]
[quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
Missy
Joined: 15 Sep 2011
Posts: 2
|
| Posted: Wed Oct 19, 2011 9:02 am Post subject: Re: Zenith-List Digest: 7 Msgs - 10/03/11 |
|
|
[quote="slandwcmitch(at)yahoo.com"]William is deceased & we would like to retain this email but be deleted from these mailings. How do we go about doing that? Mitchell family
From: Zenith-List Digest Server <zenith>
To: Zenith-List Digest List <zenith>
Sent: Tuesday, October 4, 2011 12:00 AM
Subject: Zenith-List Digest: 7 Msgs - 10/03/11
*No this William Clapp is NOT deceased. I spoke to him the other day. He promised he would send me his payment. This one resides and has a business in Valdosta, GA. His daughters name is Elaine.
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Zenith-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2011-10-03&Archive=Zenith
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2011-10-03&Archive=Zenith
=======================
EMail Version of Today's List Digest Archive
=======================
� ----------------------------------------------------------
� Zenith-List Digest Archive
� ---
� Total Messages Posted Mon 10/03/11: 7
� ----------------------------------------------------------
Today's Message Index:
----------------------
1. 04:38 AM - 601 XL bearing bloc material (Michel Therrien)
2. 05:09 AM - Re: 601 XL bearing bloc material (Paul Mulwitz)
3. 06:53 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
4. 07:40 AM - Re: [Probable Spam] 601 XL bearing bloc material (Malcolm Hunt)
5. 09:31 AM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
� 6. 10:26 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
7. 08:26 PM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
________________________________ Message 1 _____________________________________
Time: 04:38:17 AM PST US
From: Michel Therrien <mtherr>
Subject: 601 XL bearing bloc material
Hello group,=0A=C2-=0AAs part orf my 601 renovation project, I want to re
place the lower nose wheel fork bearing with the newer style 601 XL plastic
bloc.=C2- I would like to know what material is mandated (delrin, nylon,
acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AM
ichel=0A=C2-=0Ado not archive=0A=0A----------------------------=0AMichel
Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pag
es.infinit.net/mthobby=0A=0A=0A________________________________=0AFrom: Lar
ry McFarland <larry>=0ATo: Zenith-List <zenith>=0ASent: Wednesday, September 28, 2011 2:46:58 PM=0ASubject: Zenith-
List: access panel drawing =0A=0A=0AHi guys,=0AI=99ve had a few peopl
e ask about a drawing for the inspection panels I use on my 601HDS. =0AThe
link below will get you to the drawing on my site and clicking the drawing
at the bottom =0Aof the page will get you to a larger image that=99s
printable. The panels serve my plane well=0Aand have never given any diffic
ulty. =C2-If you want to make a set of these, the drawing is =0Aa good gu
ide.=0A=C2-=0Ahttp://www.macsmachine.com/html/winginsppanels.htm=0A=C2-
=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarland=C2- 601HDS at www.m
=====================
________________________________ Message 2 _____________________________________
Time: 05:09:52 AM PST US
From: Paul Mulwitz <psm>
Subject: Re: 601 XL bearing bloc material
Hi Michael,
I'm not sure whether mine is the old or new stuff, but I think it is
Nyloil -- oil impregnated nylon.
Paul
XL in flight test
On 10/3/2011 4:35 AM, Michel Therrien wrote:
| Quote: | Hello group,
As part orf my 601 renovation project, I want to replace the lower
nose wheel fork bearing with the newer style 601 XL plastic bloc. I
would like to know what material is mandated (delrin, nylon, acetal,
UHMWE?) and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
*From:* Larry McFarland <larry>
*To:* Zenith-List <zenith>
*Sent:* Wednesday, September 28, 2011 2:46:58 PM
*Subject:* Zenith-List: access panel drawing
Hi guys,
Ive had a few people ask about a drawing for the inspection panels I
use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image thats printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<url>
*
el=nofollow target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
*
*
*
|
________________________________ Message 3 _____________________________________
Time: 06:53:51 AM PST US
From: "Larry McFarland" <larry>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<url>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
________________________________ Message 4 _____________________________________
Time: 07:40:30 AM PST US
From: "Malcolm Hunt" <malcolmhunt>
Subject: RE: [Probable Spam] 601 XL bearing bloc material
Hi Michael
The plans call up Nyoil (at) 1.5=9D thick, can be obtained in England
so should be easy with you.
Nylon is not the easiest to work but the part from the factory is
expensive.
Hope this helps
Malcolm Hunt
Plans builder in England
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Larry
McFarland
Sent: 03 October 2011 14:51
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland� 601HDS at www.macsmachine.com
<url>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Zenith-List
http://forums.matronics.com
http://www.matronics.com/contribution
__________ Information from ESET Smart Security, version of virus
signature database 6512 (20111003) __________
The message was checked by ESET Smart Security.
________________________________ Message 5� _____________________________________
Time: 09:31:00 AM PST US
From: Michel Therrien <mtherr>
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed tha
t my gear leg got a bit of wear (0.003") from movement over the=C2-6 year
s that the plane flew (probably constant rudder movement).=C2- I would li
ke to do away of the aluminum contact on the nose wheel... did you make it
so that contact is only on the plastic part?=C2- =0A=C2-=0AThanks!=0A
=C2-=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrie
n CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infi
nit.net/mthobby=0A=0A=0A________________________________=0AFrom: Larry McFa
rland <larry>=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASent: Monda
y, October 3, 2011 9:50:31 AM=0ASubject: RE: [Probable Spam] 6
01 XL bearing bloc material=0A=0A=0AHI Michel,=0AI=99m using UHMWE at
3/8-inch thickness that replaced Nylon that absorbed water.=C2- =0ANot s
o expensive and easy to work. =0AReasonable Source:=C2-=C2- http://www.
k-mac-plastics.net/index.htm =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601
HDS at www.macsmachine.com=0A=C2-=0AFrom:owner-zenith-list-server(at)matroni
cs.com [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien=0ASent: Monday, October 03, 2011 6:35 AM=0ATo: zenith-list(at)matroni
cs.com=0ASubject: [Probable Spam] 601 XL bearing bloc material
=0A=C2-=0AHello group,=0A=C2-=0AAs part orf my 601 renovation project,
I want to replace the lower nose wheel fork bearing with the newer style 60
1 XL plastic bloc.=C2- I would like to know what material is mandated (de
lrin, nylon, acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!
=0A=C2-=0AMichel=0A=C2-=0Ado not archive=0A=C2-=0A-------------------
---------=0AMichel Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com
/ch601=0Ahttp://pages.infinit.net/mthobby=0AFrom:Larry McFarland <larry>=0ATo: Zenith-List <zenith>=0ASent: Wednesd
ay, September 28, 2011 2:46:58 PM=0ASubject: access panel draw
ing =0AHi guys,=0AI=99ve had a few people ask about a drawing for the
inspection panels I use on my 601HDS. =0AThe link below will get you to th
e drawing on my site and clicking the drawing at the bottom =0Aof the page
will get you to a larger image that=99s printable. The panels serve m
y plane well=0Aand have never given any difficulty. =C2-If you want to ma
ke a set of these, the drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.ma
csmachine.com/html/winginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A
=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2
-=0A=C2-=0Ael=nofollow target=_blank>http://www.matronics.com/Navig
ator?Zenith-List=0Aet=_blank>http://forums.matronics.com=0Allow target=
_blank>http://www.matronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A
=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp://forums.mat
========
________________________________ Message 6 _____________________________________
Time: 10:26:12 AM PST US
From: "Larry McFarland" <larry>
Subject: RE: [Probable Spam] Zenith-List: 601 XL bearing bloc material
Yes Michel,
I noticed wear in the same fore and aft areas and made adjustments to
keep the tube
| Quote: | From being in contact with the aluminum. With the UHMWE, that works
rather well.
|
Get a good fit with the bearing plastic and then remove a little
aluminum for clearance.
It=99ll hold.
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 11:28 AM
Subject: Re: [Probable Spam] Zenith-List: 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed
that my gear leg got a bit of wear (0.003") from movement over the 6
years that the plane flew (probably constant rudder movement). I would
like to do away of the aluminum contact on the nose wheel... did you
make it so that contact is only on the plastic part?
Thanks!
Michel
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry>
Sent: Monday, October 3, 2011 9:50:31 AM
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)
[mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
From: Larry McFarland <larry>
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
<url>
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com <url>
llow target=_blank>http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Zenith-List
http://forums.matronics.com
http://www.matronics.com/contribution
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
________________________________ Message 7 _____________________________________
Time: 08:26:16 PM PST US
From: Michel Therrien <mtherr>
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I noticed different varieties of Nyloil... there is the green one and then,
the MDX (gray or blue).=C2- Are they interchangeable?=C2- It appears t
hat the kit part is the grey Nyloil (that is filled with Moly...).=0A=C2-
=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrien CH60
1-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infinit.ne
t/mthobby=0A=0A=0A________________________________=0AFrom: Malcolm Hunt <ma>=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASent: Mo
nday, October 3, 2011 10:37:46 AM=0ASubject: RE: [Probable Spam] Zenith-Lis
t: 601 XL bearing bloc material=0A=0A=0AHi Michael=0A=C2-=0AThe plans cal
l up Nyoil (at) 1.5=9D thick, can be obtained in England so should be ea
sy with you.=0A=C2-=0ANylon is not the easiest to work but the part from
the factory is expensive.=0A=C2-=0AHope this helps=0A=C2-=0AMalcolm Hun
t=0APlans builder in England=0A=C2-=0AFrom:owner-zenith-list-server(at)matro
nics.com [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Larry
McFarland=0ASent: 03 October 2011 14:51=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0A
Subject: RE: [Probable Spam] 601 XL bearing bloc material=0A
=C2-=0AHI Michel,=0AI=99m using UHMWE at 3/8-inch thickness that re
placed Nylon that absorbed water.=C2- =0ANot so expensive and easy to wor
k. =0AReasonable Source:=C2-=C2- http://www.k-mac-plastics.net/index.ht
m =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com
=0A=C2-=0AFrom:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com) [mailto:owner-zenit
h-list-server(at)matronics.com (h-list-server(at)matronics.com)] On Behalf Of Michel Therrien=0ASent: Monday, O
ctober 03, 2011 6:35 AM=0ATo: zenith-list(at)matronics.com (zenith-list(at)matronics.com)=0ASubject: [Probabl
e Spam] Zenith-List: 601 XL bearing bloc material=0A=C2-=0AHello group,
=0A=C2-=0AAs part orf my 601 renovation project, I want to replace the lo
wer nose wheel fork bearing with the newer style 601 XL plastic bloc.=C2-
I would like to know what material is mandated (delrin, nylon, acetal, UHM
WE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AMichel=0A=C2
-=0Ado not archive=0A=C2-=0A----------------------------=0AMichel Therr
ien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.in
finit.net/mthobby=0AFrom:Larry McFarland <larry>=0ATo: Zeni
th-List <zenith>=0ASent: Wednesday, September 28, 2011 2
:46:58 PM=0ASubject: access panel drawing =0AHi guys,=0AI
=99ve had a few people ask about a drawing for the inspection panels I u
se on my 601HDS. =0AThe link below will get you to the drawing on my site a
nd clicking the drawing at the bottom =0Aof the page will get you to a larg
er image that=99s printable. The panels serve my plane well=0Aand hav
e never given any difficulty. =C2-If you want to make a set of these, the
drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.macsmachine.com/html/win
ginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarla
nd=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2-=0A=C2-=0Ael=no
follow target=_blank>http://www.matronics.com/Navigator?Zenith-List=0Aet
=_blank>http://forums.matronics.com=0Allow target=_blank>http://www.mat
ronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0Ahttp
://www.matronics.com/Navigator?Zenith-List=0A=C2-=0Ahttp://forums.matroni
cs.com=0A=C2-=0Ahttp://www.matronics.com/contribution=0A=C2-=0A=C2-
=0A=C2-=0A=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp:
//forums.matronics.com=0Ahttp://www.matronics.com/contribution=0A=C2-=0A
=0A=0A__________ Information from ESET Smart Security, version of virus sig
nature database 6512 (20111003) __________=0A=0AThe message was checked by
ESET Smart Security.=0A=0A=0Ahttp:/ics.com" target=_blank p; &nhttp://w=======================
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
