 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
rijaeger(at)wausau.k12.wi
Guest
|
 Posted: Tue Nov 15, 2011 5:39 am Post subject: Yak Hardware |
 |
|
Does anyone have a source for any of the Yak 52 hardware? Specifically I'm looking for one of the main gear / retract arm pins - not the giant main pin. This pin is about 1 1/2" in length, has a shallow, flat, round head w/ one flat side and is threaded / drilled to accept a castle-type nut / cotter pin. The number on the head appears to be 52410008. (?) I'm sure there'll be more that I need. I tried hard to keep track of everything, but disassembling a Yak outside...in November...in New Jersey...in the dark...alone...on grass...I guess the next guy that mows the lawn should wear shin guards.  Thanks!
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
dsavarese0812(at)bellsout
Guest
|
| Posted: Tue Nov 15, 2011 6:00 am Post subject: Yak Hardware |
|
|
Give Jill a call at M14P in Kingman, AZ, or call Cliff Coy at Border
Air in Swanton, VT. They may be able to help you.
Dennis
A. Dennis Savarese
334-285-6263
334-546-8182 (cell)
Skype: Yakguy1
www.yak-52.com
On 11/15/2011 7:35 AM, Rico Jaeger wrote:
| Quote: | Does anyone have a source for any of the Yak 52 hardware? Specifically
I'm looking for one of the main gear / retract arm pins - not the
giant main pin. This pin is about 1 1/2" in length, has a shallow,
flat, round head w/ one flat side and is threaded / drilled to accept
a castle-type nut / cotter pin. The number on the head appears to be
52410008. (?) I'm sure there'll be more that I need. I tried hard to
keep track of everything, but disassembling a Yak outside...in
November...in New Jersey...in the dark...alone...on grass...I guess
the next guy that mows the lawn should wear shin guards. Thanks!
*
*
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
rijaeger(at)wausau.k12.wi
Guest
|
| Posted: Tue Nov 15, 2011 6:12 am Post subject: Yak Hardware |
|
|
Thanks Dennis! And I have to say...you were DEAD ON w/ that advice Saturday on getting to the aileron push tubes - even the wrench size! THANK YOU!!! But wow...I'm not a big guy but I had to be a gymnast to ball up and squeeze into some of those spaces!
| Quote: | >> "A. Dennis Savarese" <dsavarese0812(at)bellsouth.net> 11/15/2011 7:57 AM >>>
--> Yak-List message posted by: "A. Dennis Savarese" <dsavarese0812(at)bellsouth.net>
|
Give Jill a call at M14P in Kingman, AZ, or call Cliff Coy at Border
Air in Swanton, VT. They may be able to help you.
Dennis
A. Dennis Savarese
334-285-6263
334-546-8182 (cell)
Skype: Yakguy1
www.yak-52.com
On 11/15/2011 7:35 AM, Rico Jaeger wrote:
| Quote: | Does anyone have a source for any of the Yak 52 hardware? Specifically
I'm looking for one of the main gear / retract arm pins - not the
giant main pin. This pin is about 1 1/2" in length, has a shallow,
flat, round head w/ one flat side and is threaded / drilled to accept
a castle-type nut / cotter pin. The number on the head appears to be
52410008. (?) I'm sure there'll be more that I need. I tried hard to
keep track of everything, but disassembling a Yak outside...in
November...in New Jersey...in the dark...alone...on grass...I guess
the next guy that mows the lawn should wear shin guards. Thanks!
*
< -- Please Support Your Lists This Month ://www.matronics.com/contribution">http://www.matronics.com/contributionhttp://www.matronics.com/Navigator?Yak-List
- MATRONICS p; -Matt Dralle, ======
|
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
viperdoc(at)mindspring.co
Guest
|
| Posted: Tue Nov 15, 2011 6:37 am Post subject: Yak Hardware |
|
|
Yes, I’m still looking for that 3 foot Russian with 12 inch fingers! If you find one let me know! They will come at a high price I’m sure.
Doc
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Rico Jaeger
Sent: Tuesday, November 15, 2011 8:10 AM
To: yak-list(at)matronics.com
Subject: Re: Yak Hardware
Thanks Dennis! And I have to say...you were DEAD ON w/ that advice Saturday on getting to the aileron push tubes - even the wrench size! THANK YOU!!! But wow...I'm not a big guy but I had to be a gymnast to ball up and squeeze into some of those spaces!
Give Jill a call at M14P in Kingman, AZ, or call Cliff Coy at Border
Air in Swanton, VT. They may be able to help you.
Dennis
A. Dennis Savarese
334-285-6263
334-546-8182 (cell)
Skype: Yakguy1
www.yak-52.com
On 11/15/2011 7:35 AM, Rico Jaeger wrote:
| Quote: | Does anyone have a source for any of the Yak 52 hardware? Specifically
I'm looking for one of the main gear / retract arm pins - not the
giant main pin. This pin is about 1 1/2" in length, has a shallow,
flat, round head w/ one flat side and is threaded / drilled to accept
a castle-type nut / cotter pin. The number on the head appears to be
52410008. (?) I'm sure there'll be more that I need. I tried hard to
keep track of everything, but disassembling a Yak outside...in
November...in New Jersey...in the dark...alone...on grass...I guess
the next guy that mows the lawn should wear shin guards. Thanks!
*
< -- Please Support Your Lists This Month ://www.matronics.com/contribution">http://www.matronics.com/contribution</Asp; com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
- MATRONICS p; -Matt Dralle, ======
|
01234567890123456789012
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
rijaeger(at)wausau.k12.wi
Guest
|
| Posted: Tue Nov 15, 2011 7:01 am Post subject: Yak Hardware |
|
|
Ha! TRUE! Please don't get me wrong...I LOVE IT! All the bruises, scratches and sore muscles I've incurred due to diving head-first into the Yak could only be more-fondly viewed if they were inflicted by Jessica Alba...
| Quote: | >> "Roger Kemp MD" <viperdoc(at)mindspring.com> 11/15/2011 8:33 AM >>>
|
Yes, I’m still looking for that 3 foot Russian with 12 inch fingers! If you find one let me know! They will come at a high price I’m sure.
Doc
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Rico Jaeger
Sent: Tuesday, November 15, 2011 8:10 AM
To: yak-list(at)matronics.com
Subject: Re: Yak Hardware
Thanks Dennis! And I have to say...you were DEAD ON w/ that advice Saturday on getting to the aileron push tubes - even the wrench size! THANK YOU!!! But wow...I'm not a big guy but I had to be a gymnast to ball up and squeeze into some of those spaces!
Give Jill a call at M14P in Kingman, AZ, or call Cliff Coy at Border
Air in Swanton, VT. They may be able to help you.
Dennis
A. Dennis Savarese
334-285-6263
334-546-8182 (cell)
Skype: Yakguy1
www.yak-52.com
On 11/15/2011 7:35 AM, Rico Jaeger wrote:
| Quote: | Does anyone have a source for any of the Yak 52 hardware? Specifically
I'm looking for one of the main gear / retract arm pins - not the
giant main pin. This pin is about 1 1/2" in length, has a shallow,
flat, round head w/ one flat side and is threaded / drilled to accept
a castle-type nut / cotter pin. The number on the head appears to be
52410008. (?) I'm sure there'll be more that I need. I tried hard to
keep track of everything, but disassembling a Yak outside...in
November...in New Jersey...in the dark...alone...on grass...I guess
the next guy that mows the lawn should wear shin guards. Thanks!
*
< -- Please Support Your Lists This Month ://www.matronics.com/contribution">http://www.matronics.com/contribution</Asp; com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
- MATRONICS p; -Matt Dralle, ======
|
01234567890123456789012
3 [quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
