  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		napierm(at)cisco.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Jan 10, 2012 7:37 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				Hey Joel,
 
 Couple of questions:
 
 Why is the Tygon any better than Gates Barricade or similar vapor blocking
 hoses?
 
 Is the cost of the Tygon really $2 per foot?  If so, you wanted it badly
 enough to be willing to buy a whole roll.  What's so good about it?
 
 Thanks,
 
 Mark
 
  	  | Quote: | 	 		    
       1. 08:15 PM - Tygon tubing 5/16 id  (Joel)
   
   
   
  ________________________________  Message 1
  _____________________________________
  
  
  Time: 08:15:01 PM PST US
  Subject: Tygon tubing 5/16 id
  From: "Joel" <foxfloatflyer(at)hotmail.com>
  
  
  Kitfoxers,
  
  I've located some yellow Tygon fuel line for my model 5, but had to buy a full
  roll of it.  I'm selling eight  foot lengths, enough for both wings to the
  header
  tank lines for $20 with pre-paid shipping anywhere in the U.S.  My old fuel
  line was getting brittle and made wing folding problematic.
  
  Joel Mapes
  foxfloatflyer(at)hotmail.com
  
  Kitfox V 912ULS
  Full Lotus 1650s this summer!
  
  
  Read this topic online here:
  
  http://forums.matronics.com/viewtopic.php?p=362906#362906
  
 
 | 	 
 
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		msm_9949(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Jan 10, 2012 9:50 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				For starters, you can see fuel flowing from the wing tanks through tygon. It's a comforting sight at 9K feet above lake Michigan. 2 bucks a foot seems steep though. Can't you buy it by the foot from ACS?
   
  Marco Menezes N99KX
  Model 2 582-90 C-Box 3:1 w/clutch
  Hersey, MI
   
  
 
    
 From: napierm <napierm(at)cisco.com>
 To: kitfox-list(at)matronics.com 
 Sent: Tuesday, January 10, 2012 10:34 AM
 Subject: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 
 --> Kitfox-List message posted by: napierm <napierm(at)cisco.com (napierm(at)cisco.com)>
 
 Hey Joel,
 
 Couple of questions:
 
 Why is the Tygon any better than Gates Barricade or similar  vapor blocking
 hoses?
 
 Is the cost of the Tygon really $2 per foot?  If so, you wanted it badly
 enough to be willing to buy a whole roll.  What's so good about it?
 
 Thanks,
 
 Mark
 
  	  | Quote: | 	 		    
       1. 08:15 PM - Tygon tubing 5/16 id  (Joel)
   
   
   
  ________________________________  Message 1
  _____________________________________
  
  
  Time: 08:15:01 PM PST US
  Subject: Tygon tubing 5/16 id
  From: "Joel" <foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)>
  
  
  Kitfoxers,
  
  I've located some yellow Tygon fuel line for my model 5, but had to buy a full
  roll of it.  I'm selling eight  foot lengths, enough for both wings to the
  header
  tank  lines for $20 with pre-paid shipping anywhere in the U.S.  My old fuel
  line was getting brittle and made wing folding problematic.
  
  Joel Mapes
  foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)
  
  Kitfox V 912ULS
  Full Lotus 1650s this summer!
  
  
  Read this topic online here:
  
  http://forums.matronics.com/viewtopic.php?p=362906#362906
  
 
 | 	  
 
 _-========================ef="http://www.matronics.com/Navigator?Kitfox-List"                      &nbs===================
  [quote][b]
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		PMorel
 
  
  Joined: 09 Jul 2007 Posts: 62 Location: Locust Grove, GA USA
  | 
		
			
				 Posted: Tue Jan 10, 2012 10:03 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				I'm interested.....you need to list this on TeamKitFox in the classifieds...I'm sure you'll get more interested builders
  
 Paul 
 From: Kitfox-List Digest Server <kitfox-list(at)matronics.com>
 To: Kitfox-List Digest List <kitfox-list-digest(at)matronics.com>
 Sent: Tue, January 10, 2012 3:00:40 AM
 Subject: Kitfox-List Digest: 1 Msgs - 01/09/12
 
  *
 
  ==================================================
    Online Versions of Today's List Digest Archive
  ==================================================
 
 Today's complete Kitfox-List Digest can also be found in either of the 
 two Web Links listed below.  The .html file includes the Digest formatted 
 in HTML for viewing with a web browser and features Hyperlinked Indexes 
 and Message Navigation.  The .txt file includes the plain ASCII version 
 of the Kitfox-List Digest and can be viewed with a generic text editor 
 such as Notepad or with a web browser. 
 
 HTML Version:
 
     [url=http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 12-01-09&Archive=Kitfox]http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 12-01-09&Archive=Kitfox[/url]
 
 Text Version:
 
      [url=http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 12-01-09&Archive=Kitfox]http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 12-01-09&Archive=Kitfox[/url]
  ================================================
    EMail Version of Today's List Digest Archive
  ================================================
 
  
            ----------------------------------------------------------
                            Kitfox-List Digest Archive
                                       ---
                      Total Messages Posted Mon 01/09/12: 1
             ----------------------------------------------------------
  
  
 Today's Message Index:
 ----------------------
  
      1. 08:15 PM - Tygon tubing 5/16 id  (Joel)
  
  
  
 ________________________________  Message 1  _____________________________________
 Time: 08:15:01 PM PST US
 Subject: Tygon tubing 5/16 id
 From: "Joel" <foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)>
 Kitfoxers,
 
 I've located some yellow Tygon fuel line for my model 5, but had to buy a full
 roll of it.  I'm selling eight  foot lengths, enough for both wings to the header
 tank lines for $20 with pre-paid shipping anywhere in the U.S.  My old fuel
 line was getting brittle and made wing folding problematic.
 
 Joel Mapes
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  _________________ Paul Morel
 
912 Speedster
 
Locust Grove, GA
 
 
www.WingsAirPhotos.com | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Pat Reilly
 
 
  Joined: 06 Aug 2009 Posts: 345
 
  | 
		
			
				 Posted: Tue Jan 10, 2012 2:56 pm    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				Marco, Did you cross Lake MI?
  
 Pat Reilly
 Mod 3 582 Rebuilt
 Rockford, IL
 
 On Tue, Jan 10, 2012 at 11:44 AM, Marco Menezes <msm_9949(at)yahoo.com (msm_9949(at)yahoo.com)> wrote:
   	  | Quote: | 	 		   For starters, you can see fuel flowing from the wing tanks through tygon. It's a comforting sight at 9K feet above lake Michigan. 2 bucks a foot seems steep though. Can't you buy it by the foot from ACS?
    
  Marco Menezes N99KX
  Model 2 582-90 C-Box 3:1 w/clutch
  Hersey, MI
   
  
 
    
 From: napierm <napierm(at)cisco.com (napierm(at)cisco.com)>
  To: kitfox-list(at)matronics.com (kitfox-list(at)matronics.com) 
 Sent: Tuesday, January 10, 2012 10:34 AM
  Subject: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 
 --> Kitfox-List message posted by: napierm <napierm(at)cisco.com (napierm(at)cisco.com)>
  
 Hey Joel,
 
 Couple of questions:
 
 Why is the Tygon any better than Gates Barricade or similar  vapor blocking
 hoses?
 
 Is the cost of the Tygon really $2 per foot?  If so, you wanted it badly
 enough to be willing to buy a whole roll.  What's so good about it?
 
 Thanks,
 
 Mark
 
  >  
  	  | Quote: | 	 		        1. 08:15 PM - Tygon tubing 5/16 id  (Joel)
   
   
   
  ________________________________  Message 1
  _____________________________________
  
  
  Time: 08:15:01 PM PST US
  > Subject: Tygon tubing 5/16 id
 | 	  
  	  | Quote: | 	 		   From: "Joel" <foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)>
  
  
  Kitfoxers,
  
  > I've located some yellow Tygon fuel line for my model 5, but had to buy a full
 | 	  
  	  | Quote: | 	 		   roll of it.  I'm selling eight  foot lengths, enough for both wings to the
  header
  tank  lines for $20 with pre-paid shipping anywhere in the U.S.  My old fuel
  line was getting brittle and made wing folding problematic.
  
  Joel Mapes
  foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)
  > 
 | 	  
 
   	  | Quote: | 	 		  
 
 arget="_blank">http://www.matronics.com/Navigator?Kitfox-List
 tp://forums.matronics.com
 _blank">http://www.matronics.com/contribution
 
  | 	  
 
  | 	  
 -- 
 Pat Reilly
 Mod 3 582 Rebuild
 Rockford,IL
   [quote][b]
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		brubakermal(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Jan 10, 2012 4:31 pm    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				I just listed a kitfox lite on barnstormers only $6,500 W/ n#  it would Make a great 2ed  plane for the snowbird.  
 
  
 Malcolm & Jeanne Brubaker 
 Michigan Sport Pilot Repair 
 LSRM-A, PPC, WS
 Great Sails - Sailmaker 
 for Ultralight & Light Sport
 (989)513-3022
 
      
   From: Patrick  Reilly <patreilly43(at)gmail.com>
  To: kitfox-list(at)matronics.com 
  Sent: Tuesday, January 10, 2012 5:53 PM
  Subject: Re: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
   
  Marco, Did you cross Lake MI?
  
 Pat Reilly
 Mod 3 582 Rebuilt
 Rockford, IL
 
 On Tue, Jan 10, 2012 at 11:44 AM, Marco Menezes <msm_9949(at)yahoo.com (msm_9949(at)yahoo.com)> wrote:
   	  | Quote: | 	 		   For starters, you can see fuel flowing from the wing tanks through tygon. It's a comforting sight at 9K feet above lake Michigan. 2 bucks a foot seems steep though. Can't you buy it by the foot from ACS?
    
  Marco Menezes N99KX
  Model 2 582-90 C-Box 3:1 w/clutch
  Hersey, MI
   
  
 
    
 From: napierm <napierm(at)cisco.com (napierm(at)cisco.com)>
  To: kitfox-list(at)matronics.com (kitfox-list(at)matronics.com) 
 Sent: Tuesday, January 10, 2012 10:34 AM
  Subject: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 
 --> Kitfox-List message posted by: napierm <napierm(at)cisco.com (napierm(at)cisco.com)>
  
 Hey Joel,
 
 Couple of questions:
 
 Why is the Tygon any better than Gates Barricade or similar  vapor blocking
 hoses?
 
 Is the cost of the Tygon really $2 per foot?  If so, you wanted it badly
 enough to be willing to buy a whole roll.  What's so good about it?
 
 Thanks,
 
 Mark
 
  >  
  	  | Quote: | 	 		        1. 08:15 PM - Tygon tubing 5/16 id  (Joel)
   
   
   
  ________________________________  Message 1
  _____________________________________
  
  
  Time: 08:15:01 PM PST US
  > Subject: Tygon tubing 5/16 id
 | 	  
  	  | Quote: | 	 		   From: "Joel" <foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)>
  
  
  Kitfoxers,
  
  > I've located some yellow Tygon fuel line for my model 5, but had to buy a full
 | 	  
  	  | Quote: | 	 		   roll of it.  I'm selling eight  foot lengths, enough for both wings to the
  header
  tank  lines for $20 with pre-paid shipping anywhere in the U.S.  My old fuel
  line was getting brittle and made wing folding problematic.
  
  Joel Mapes
  foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)
  > 
 | 	  
 
   	  | Quote: | 	 		  
  arget="_blank">http://www.matronics.com/Navigator?Kitfox-List
 tp://forums.matronics.com
 _blank">http://www.matronics.com/contribution
 
  | 	  
 
  | 	  
 -- 
 Pat Reilly
 Mod 3 582 Rebuild
 Rockford,IL
   [quote][b]
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		dj45
 
 
  Joined: 25 Jul 2006 Posts: 92 Location: Jackson MI
  | 
		
			
				 Posted: Wed Jan 11, 2012 6:29 pm    Post subject: Re: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				And the problem with crossing Lake Michigan is???
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  _________________ Do not archive
 
 
Dan Stanton
 
N801S CH 801
 
N226BS CH701
 
N24DS CH750 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Lynn Matteson
 
 
  Joined: 10 Jan 2006 Posts: 2778 Location: Grass Lake, Michigan
  | 
		
			
				 Posted: Thu Jan 12, 2012 3:25 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				C'mon, Dan.....you've got nothing but water under you for up to an  
 hour, and given the problems that you and I have had with engines  
 (and as for me, running out of fuel), is it worth taking the chance?
 
 Lynn Matteson
 Kitfox IV Speedster, taildragger
 Jabiru 2200, #2062
 Prince prop 64 x 30, P-tip
 Electroair direct-fire ignition system
 Rotec TBI-40 injection (sleeved to 36mm)
 Status: flying with 1215 hrs... (since 3-27-2006)
 do not archive
 
 
 On Jan 11, 2012, at 9:29 PM, dj45 wrote:
 
 
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  _________________ Lynn
 
Kitfox IV-Jabiru 2200
 
N369LM | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		brubakermal(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Thu Jan 12, 2012 5:06 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				my budy flew the big lake 5 times in a drifter w/ a 503 and lodis floats. he spends moor time flying over land with floats on than water sometimes. he did get lost over the lake once no compus.  ended up turning north for a while had to land in 6ft swells and re fuel almost died but made it. re fueled with the motor running. I herd the roul is 50 minuts in 50% water and you have a 50 50 chance of dying.  
 
  
 Malcolm & Jeanne Brubaker 
 Michigan Sport Pilot Repair 
 LSRM-A, PPC, WS
 Great Sails - Sailmaker 
 for Ultralight & Light Sport
 (989)513-3022
 
       
   From: Lynn Matteson <lynnmatt(at)jps.net>
  To: kitfox-list(at)matronics.com 
  Sent: Thursday, January 12, 2012 6:21 AM
  Subject: Re: Kitfox-List: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
   
  
  --> Kitfox-List message posted by: Lynn Matteson <lynnmatt(at)jps.net (lynnmatt(at)jps.net)>
 
 C'mon, Dan.....you've got nothing but water under you for up to an  
 hour, and given the problems that you and I have had with engines  
 (and as for me, running out of fuel), is it worth taking the chance?
 
 Lynn Matteson
 Kitfox IV Speedster, taildragger
 Jabiru 2200, #2062
 Prince prop 64 x 30, P-tip
 Electroair direct-fire ignition system
 Rotec TBI-40 injection (sleeved to 36mm)
 Status: flying with 1215 hrs... (since 3-27-2006)
 do not archive
 
 
 On Jan 11, 2012, at 9:29 PM, dj45 wrote:
 
 
 
  
  
   
  [quote][b]
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		msm_9949(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sat Jan 14, 2012 3:21 pm    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				2 round trips to OSH, crossing Lake Michigan at its narrowest point from Cape Sable, MI to Manitowoc, WI. Not more than 30 minutes over water each way and in contact with lake reporting service the entire time. For me it shaves hours off the trip. Risky? Perhaps but some might argue no more so than 30 minutes in the pattern at your favorite airport.
 
 Marco Menezes N99KX
 Model 2 582-90 C-box 3:1 w/clutch
 Hersey, MI
 
 On Jan 10, 2012, at 5:53 PM, Patrick Reilly <patreilly43(at)gmail.com (patreilly43(at)gmail.com)> wrote:
 
 [quote]Marco, Did you cross Lake MI?
  
 Pat Reilly
 Mod 3 582 Rebuilt
 Rockford, IL
 
 On Tue, Jan 10, 2012 at 11:44 AM, Marco Menezes <[url=mailto:msm_9949(at)yahoo.com]msm_9949(at)yahoo.com (msm_9949(at)yahoo.com)[/url]> wrote:
   	  | Quote: | 	 		   For starters, you can see fuel flowing from the wing tanks through tygon. It's a comforting sight at 9K feet above lake Michigan. 2 bucks a foot seems steep though. Can't you buy it by the foot from ACS?
    
  Marco Menezes N99KX
  Model 2 582-90 C-Box 3:1 w/clutch
  Hersey, MI
   
  
 
    
 From: napierm <[url=mailto:napierm(at)cisco.com]napierm(at)cisco.com (napierm(at)cisco.com)[/url]>
  To: [url=mailto:kitfox-list(at)matronics.com]kitfox-list(at)matronics.com (kitfox-list(at)matronics.com)[/url] 
 Sent: Tuesday, January 10, 2012 10:34 AM
  Subject: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 
 --> Kitfox-List message posted by: napierm <[url=mailto:napierm(at)cisco.com]napierm(at)cisco.com (napierm(at)cisco.com)[/url]>
  
 Hey Joel,
 
 Couple of questions:
 
 Why is the Tygon any better than Gates Barricade or similar  vapor blocking
 hoses?
 
 Is the cost of the Tygon really $2 per foot?  If so, you wanted it badly
 enough to be willing to buy a whole roll.  What's so good about it?
 
 Thanks,
 
 Mark
 
  >  
  	  | Quote: | 	 		        1. 08:15 PM - Tygon tubing 5/16 id  (Joel)
   
   
   
  ________________________________  Message 1
  _____________________________________
  
  
  Time: 08:15:01 PM PST US
  > Subject: Tygon tubing 5/16 id
 | 	  
  	  | Quote: | 	 		   From: "Joel" <[url=mailto:foxfloatflyer(at)hotmail.com]foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)[/url]>
  
  
  Kitfoxers,
  
  > I've located some yellow Tygon fuel line for my model 5, but had to buy a full
 | 	  
  	  | Quote: | 	 		   roll of it.  I'm selling eight  foot lengths, enough for both wings to the
  header
  tank  lines for $20 with pre-paid shipping anywhere in the U.S.  My old fuel
  line was getting brittle and made wing folding problematic.
  
  Joel Mapes
  [url=mailto:foxfloatflyer(at)hotmail.com]foxfloatflyer(at)hotmail.com (foxfloatflyer(at)hotmail.com)[/url]
  > 
 | 	  
 
  
 
  | 	  
 -- 
 Pat Reilly
 Mod 3 582 Rebuild
 Rockford,IL
   
 [b]
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		MichaelGibbs(at)cox.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sat Jan 14, 2012 5:47 pm    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				Flying is all about risk management.  Risk can be avoided, mitigated 
 or ignored (i.e., go around the lake, wear an exposure suit, or rely 
 on the probability of having trouble over the water being very, very 
 small).
 
 You have to admit, though, Marco, that crashing next to your home 
 airport there's probably help nearby and they typically can get to 
 you quickly.  And you'll be able to breathe while waiting for them. 
 With average water temperatures in the 40F-50F range, if you end up 
 in the drink you'll only last about 30-60 minutes before you are 
 exhausted and/or unconscious--any rescue will have to be there before 
 that happens.
 
 Mike G.
 N728KF, Kitfox IV-1200 Speedster
 Phoenix, AZ
  	  | Quote: | 	 		  2 round trips to OSH, crossing Lake Michigan at its narrowest point 
 from Cape Sable, MI to Manitowoc, WI. Not more than 30 minutes over 
 water each way and in contact with lake reporting service the entire 
 time. For me it shaves hours off the trip. Risky? Perhaps but some 
 might argue no more so than 30 minutes in the pattern at your 
 favorite airport.
 
 Marco Menezes N99KX
 Model 2 582-90 C-box 3:1 w/clutch
 Hersey, MI
 
 On Jan 10, 2012, at 5:53 PM, Patrick Reilly 
 <<mailto:patreilly43(at)gmail.com>patreilly43(at)gmail.com> wrote:
 
 >Marco, Did you cross Lake MI?
 >
 >Pat Reilly
 >Mod 3 582 Rebuilt
 >Rockford, IL
 
 | 	 
 
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		lcfitt(at)sbcglobal.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sat Jan 14, 2012 6:35 pm    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				This bit of wisdom reminds me of the question my wife asked when we did our 
 emergency landing that destroyed our airplane and put both of us in the 
 hospital.  We were less than fifteen minutes out of Cameron Park in the 
 foothills of the Sierras on our way to Idaho for the factory fly-in.  The 
 question, " What would have happened if we had had to put the airplane down 
 30 minutes later.  Well we were on the ground less than a mile from EMTs at 
 a fire station.  A sheriffs deputy was on scene within five minutes. Thirty 
 minutes later we would have been over the Desolation Wilderness just West of 
 Lake Tahoe.  If lucky, a back packer on scene within an hour.  No advice 
 offered, but I suppose the risk management might be a little tighter next 
 time.  Within a month or so of flying the New Model IV.
 Lowell
 
 --------------------------------------------------
 From: "Michael Gibbs" <MichaelGibbs(at)cox.net>
 Sent: Saturday, January 14, 2012 5:44 PM
 To: <kitfox-list(at)matronics.com>
 Subject: Re: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 
  	  | Quote: | 	 		   
 
  Flying is all about risk management.  Risk can be avoided, mitigated or 
  ignored (i.e., go around the lake, wear an exposure suit, or rely on the 
  probability of having trouble over the water being very, very small).
 
  You have to admit, though, Marco, that crashing next to your home airport 
  there's probably help nearby and they typically can get to you quickly. 
  And you'll be able to breathe while waiting for them. With average water 
  temperatures in the 40F-50F range, if you end up in the drink you'll only 
  last about 30-60 minutes before you are exhausted and/or unconscious--any 
  rescue will have to be there before that happens.
 
  Mike G.
  N728KF, Kitfox IV-1200 Speedster
  Phoenix, AZ
 >2 round trips to OSH, crossing Lake Michigan at its narrowest point from 
 >Cape Sable, MI to Manitowoc, WI. Not more than 30 minutes over water each 
 >way and in contact with lake reporting service the entire time. For me it 
 >shaves hours off the trip. Risky? Perhaps but some might argue no more so 
 >than 30 minutes in the pattern at your favorite airport.
 >
 >Marco Menezes N99KX
 >Model 2 582-90 C-box 3:1 w/clutch
 >Hersey, MI
 >
 >On Jan 10, 2012, at 5:53 PM, Patrick Reilly 
 ><<mailto:patreilly43(at)gmail.com>patreilly43(at)gmail.com> wrote:
 >
 >>Marco, Did you cross Lake MI?
 >>
 >>Pat Reilly
 >>Mod 3 582 Rebuilt
 >>Rockford, IL
 
 
  
 
 | 	 
 
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		msm_9949(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Jan 15, 2012 7:11 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				I appreciate your sentiments Mike and Lowell and rest assured, alot of thought went into the initial decision to fly over the big water. At the end I had enough confidence in my airplane to decide that the risk of engine failure occurring precisely during the 30 minutes I was over water was very small. As an added precaution, I attained 10k MSL before going "feet wet" calculating that, worst case scenario, I could glide to a beach landing on either side. Finally, concluding that the longer any flight, the higher the risk, the much shorter over-water route seemed natural.
 
 Marco Menezes N99KX
 Model 2 582-90 C-Box 3:1
 Hersey, MI 
 
 On Jan 14, 2012, at 9:32 PM, "Lowell Fitt" <lcfitt(at)sbcglobal.net> wrote:
 
  	  | Quote: | 	 		   
  
  This bit of wisdom reminds me of the question my wife asked when we did our emergency landing that destroyed our airplane and put both of us in the hospital.  We were less than fifteen minutes out of Cameron Park in the foothills of the Sierras on our way to Idaho for the factory fly-in.  The question, " What would have happened if we had had to put the airplane down 30 minutes later.  Well we were on the ground less than a mile from EMTs at a fire station.  A sheriffs deputy was on scene within five minutes. Thirty minutes later we would have been over the Desolation Wilderness just West of Lake Tahoe.  If lucky, a back packer on scene within an hour.  No advice offered, but I suppose the risk management might be a little tighter next time.  Within a month or so of flying the New Model IV.
  Lowell
  
  --------------------------------------------------
  From: "Michael Gibbs" <MichaelGibbs(at)cox.net>
  Sent: Saturday, January 14, 2012 5:44 PM
  To: <kitfox-list(at)matronics.com>
  Subject: Re: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
  
 > 
 > 
 > Flying is all about risk management.  Risk can be avoided, mitigated or ignored (i.e., go around the lake, wear an exposure suit, or rely on the probability of having trouble over the water being very, very small).
 > 
 > You have to admit, though, Marco, that crashing next to your home airport there's probably help nearby and they typically can get to you quickly. And you'll be able to breathe while waiting for them. With average water temperatures in the 40F-50F range, if you end up in the drink you'll only last about 30-60 minutes before you are exhausted and/or unconscious--any rescue will have to be there before that happens.
 > 
 > Mike G.
 > N728KF, Kitfox IV-1200 Speedster
 > Phoenix, AZ
 > 
 > 
 >> 2 round trips to OSH, crossing Lake Michigan at its narrowest point from Cape Sable, MI to Manitowoc, WI. Not more than 30 minutes over water each way and in contact with lake reporting service the entire time. For me it shaves hours off the trip. Risky? Perhaps but some might argue no more so than 30 minutes in the pattern at your favorite airport.
 >> 
 >> Marco Menezes N99KX
 >> Model 2 582-90 C-box 3:1 w/clutch
 >> Hersey, MI
 >> 
 >> On Jan 10, 2012, at 5:53 PM, Patrick Reilly <<mailto:patreilly43(at)gmail.com>patreilly43(at)gmail.com> wrote:
 >> 
 >>> Marco, Did you cross Lake MI?
 >>> 
 >>> Pat Reilly
 >>> Mod 3 582 Rebuilt
 >>> Rockford, IL
 > 
 > 
 > 
 > 
  
  
  
  
 
 | 	 
 
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		lcfitt(at)sbcglobal.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Jan 15, 2012 8:21 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				Marco,
 I think you nailed the risk management idea.  My wife works for UAL and 
 flies mostly to Asia and Australia.  My phone has an app that follows ATC 
 controlled flights.  It was interesting to find that all trans Pacific 
 flights are within a relatively short distance from land.  To Beijing for 
 example it looks like they might be in visual contact with the Aleutians, 
 then down the coast of East Asia.  To Australia, they pass within an hour of 
 Hawaii etc.  I think you planned well.
 Lowell
 
 --------------------------------------------------
 From: "Marco Menezes" <msm_9949(at)yahoo.com>
 Sent: Sunday, January 15, 2012 7:11 AM
 To: <kitfox-list(at)matronics.com>
 Subject: Re: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 
  	  | Quote: | 	 		   
 
  I appreciate your sentiments Mike and Lowell and rest assured, alot of 
  thought went into the initial decision to fly over the big water. At the 
  end I had enough confidence in my airplane to decide that the risk of 
  engine failure occurring precisely during the 30 minutes I was over water 
  was very small. As an added precaution, I attained 10k MSL before going 
  "feet wet" calculating that, worst case scenario, I could glide to a beach 
  landing on either side. Finally, concluding that the longer any flight, 
  the higher the risk, the much shorter over-water route seemed natural.
 
  Marco Menezes N99KX
  Model 2 582-90 C-Box 3:1
  Hersey, MI
 
  On Jan 14, 2012, at 9:32 PM, "Lowell Fitt" <lcfitt(at)sbcglobal.net> wrote:
 
 > 
 >
 > This bit of wisdom reminds me of the question my wife asked when we did 
 > our emergency landing that destroyed our airplane and put both of us in 
 > the hospital.  We were less than fifteen minutes out of Cameron Park in 
 > the foothills of the Sierras on our way to Idaho for the factory fly-in. 
 > The question, " What would have happened if we had had to put the 
 > airplane down 30 minutes later.  Well we were on the ground less than a 
 > mile from EMTs at a fire station.  A sheriffs deputy was on scene within 
 > five minutes. Thirty minutes later we would have been over the Desolation 
 > Wilderness just West of Lake Tahoe.  If lucky, a back packer on scene 
 > within an hour.  No advice offered, but I suppose the risk management 
 > might be a little tighter next time.  Within a month or so of flying the 
 > New Model IV.
 > Lowell
 >
 > --------------------------------------------------
 > From: "Michael Gibbs" <MichaelGibbs(at)cox.net>
 > Sent: Saturday, January 14, 2012 5:44 PM
 > To: <kitfox-list(at)matronics.com>
 > Subject: Re: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 >
 >> 
 >>
 >> Flying is all about risk management.  Risk can be avoided, mitigated or 
 >> ignored (i.e., go around the lake, wear an exposure suit, or rely on the 
 >> probability of having trouble over the water being very, very small).
 >>
 >> You have to admit, though, Marco, that crashing next to your home 
 >> airport there's probably help nearby and they typically can get to you 
 >> quickly. And you'll be able to breathe while waiting for them. With 
 >> average water temperatures in the 40F-50F range, if you end up in the 
 >> drink you'll only last about 30-60 minutes before you are exhausted 
 >> and/or unconscious--any rescue will have to be there before that 
 >> happens.
 >>
 >> Mike G.
 >> N728KF, Kitfox IV-1200 Speedster
 >> Phoenix, AZ
 >>
 >>
 >>> 2 round trips to OSH, crossing Lake Michigan at its narrowest point 
 >>> from Cape Sable, MI to Manitowoc, WI. Not more than 30 minutes over 
 >>> water each way and in contact with lake reporting service the entire 
 >>> time. For me it shaves hours off the trip. Risky? Perhaps but some 
 >>> might argue no more so than 30 minutes in the pattern at your favorite 
 >>> airport.
 >>>
 >>> Marco Menezes N99KX
 >>> Model 2 582-90 C-box 3:1 w/clutch
 >>> Hersey, MI
 >>>
 >>> On Jan 10, 2012, at 5:53 PM, Patrick Reilly 
 >>> <<mailto:patreilly43(at)gmail.com>patreilly43(at)gmail.com> wrote:
 >>>
 >>>> Marco, Did you cross Lake MI?
 >>>>
 >>>> Pat Reilly
 >>>> Mod 3 582 Rebuilt
 >>>> Rockford, IL
 >>
 >>
 >>
 >>
 >
 >
 
 
  
 
 | 	 
 
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Lynn Matteson
 
 
  Joined: 10 Jan 2006 Posts: 2778 Location: Grass Lake, Michigan
  | 
		
			
				 Posted: Sun Jan 15, 2012 9:39 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				Has your model got THAT good a glide ratio? When I did the mental  
 math....with NEVER a thought of actually doing it....it seemed like  
 there was a section in the middle of the flight that was a "no-man's  
 land" (or no-man's water in this case) where if the problem occurred  
 there, you would not be able to coast to either shore. Plus, the  
 winds would have to be very favorable for this to come out well. I  
 can understand the situation you are in, Marco, living straight  
 across from Oshkosh, or nearly so. My geographic location favors the  
 southern go-around, even though it adds about 45 minutes to the  
 flight for me. But that's an easy, non-puckering, flight for  
 me....pretty much over farm land all the way....and one that I'll be  
 making this Friday if the weather holds, and there's snow at Pioneer  
 Airport.  (Annual Ski-plane Fly-in there)
 
 Lynn Matteson
 Kitfox IV Speedster, taildragger
 Jabiru 2200, #2062
 Prince prop 64 x 30, P-tip
 Electroair direct-fire ignition system
 Rotec TBI-40 injection (sleeved to 36mm)
 Status: flying with 1216 hrs... (since 3-27-2006)
 
 
 On Jan 15, 2012, at 10:11 AM, Marco Menezes wrote:
 
  	  | Quote: | 	 		   
 
  I appreciate your sentiments Mike and Lowell and rest assured, alot  
  of thought went into the initial decision to fly over the big  
  water. At the end I had enough confidence in my airplane to decide  
  that the risk of engine failure occurring precisely during the 30  
  minutes I was over water was very small. As an added precaution, I  
  attained 10k MSL before going "feet wet" calculating that, worst  
  case scenario, I could glide to a beach landing on either side.  
  Finally, concluding that the longer any flight, the higher the  
  risk, the much shorter over-water route seemed natural.
 
  Marco Menezes N99KX
  Model 2 582-90 C-Box 3:1
  Hersey, MI
 
  On Jan 14, 2012, at 9:32 PM, "Lowell Fitt" <lcfitt(at)sbcglobal.net>  
  wrote:
 
 > 
 > <lcfitt(at)sbcglobal.net>
 >
 > This bit of wisdom reminds me of the question my wife asked when  
 > we did our emergency landing that destroyed our airplane and put  
 > both of us in the hospital.  We were less than fifteen minutes out  
 > of Cameron Park in the foothills of the Sierras on our way to  
 > Idaho for the factory fly-in.  The question, " What would have  
 > happened if we had had to put the airplane down 30 minutes later.   
 > Well we were on the ground less than a mile from EMTs at a fire  
 > station.  A sheriffs deputy was on scene within five minutes.  
 > Thirty minutes later we would have been over the Desolation  
 > Wilderness just West of Lake Tahoe.  If lucky, a back packer on  
 > scene within an hour.  No advice offered, but I suppose the risk  
 > management might be a little tighter next time.  Within a month or  
 > so of flying the New Model IV.
 > Lowell
 >
 > --------------------------------------------------
 > From: "Michael Gibbs" <MichaelGibbs(at)cox.net>
 > Sent: Saturday, January 14, 2012 5:44 PM
 > To: <kitfox-list(at)matronics.com>
 > Subject: Re: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 >
 >> 
 >> <MichaelGibbs(at)cox.net>
 >>
 >> Flying is all about risk management.  Risk can be avoided,  
 >> mitigated or ignored (i.e., go around the lake, wear an exposure  
 >> suit, or rely on the probability of having trouble over the water  
 >> being very, very small).
 >>
 >> You have to admit, though, Marco, that crashing next to your home  
 >> airport there's probably help nearby and they typically can get  
 >> to you quickly. And you'll be able to breathe while waiting for  
 >> them. With average water temperatures in the 40F-50F range, if  
 >> you end up in the drink you'll only last about 30-60 minutes  
 >> before you are exhausted and/or unconscious--any rescue will have  
 >> to be there before that happens.
 >>
 >> Mike G.
 >> N728KF, Kitfox IV-1200 Speedster
 >> Phoenix, AZ
 >>
 >>
 >>> 2 round trips to OSH, crossing Lake Michigan at its narrowest  
 >>> point from Cape Sable, MI to Manitowoc, WI. Not more than 30  
 >>> minutes over water each way and in contact with lake reporting  
 >>> service the entire time. For me it shaves hours off the trip.  
 >>> Risky? Perhaps but some might argue no more so than 30 minutes  
 >>> in the pattern at your favorite airport.
 >>>
 >>> Marco Menezes N99KX
 >>> Model 2 582-90 C-box 3:1 w/clutch
 >>> Hersey, MI
 >>>
 >>> On Jan 10, 2012, at 5:53 PM, Patrick Reilly  
 >>> <<mailto:patreilly43(at)gmail.com>patreilly43(at)gmail.com> wrote:
 >>>
 >>>> Marco, Did you cross Lake MI?
 >>>>
 >>>> Pat Reilly
 >>>> Mod 3 582 Rebuilt
 >>>> Rockford, IL
 >>
 >>
 >>
 >>
 >
 >
 
 
 | 	 
 
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  _________________ Lynn
 
Kitfox IV-Jabiru 2200
 
N369LM | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		msm_9949(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Jan 15, 2012 11:30 am    Post subject: Kitfox-List Digest: 1 Msgs - 01/09/12 | 
				     | 
			 
			
				
  | 
			 
			
				I did the calcs back then when i first did it Lynn and at 10k MSL there was theoretically enough air underneath to make it across if engine quit at the halfway point. This assumed as you noted, no headwind. Both times I did it, leaving early from Ludington heading West, air was dead calm. 
 
 Marco Menezes N99KX
 
 On Jan 15, 2012, at 12:37 PM, Lynn Matteson <lynnmatt(at)jps.net> wrote:
 
  	  | Quote: | 	 		   
  
  Has your model got THAT good a glide ratio? When I did the mental math....with NEVER a thought of actually doing it....it seemed like there was a section in the middle of the flight that was a "no-man's land" (or no-man's water in this case) where if the problem occurred there, you would not be able to coast to either shore. Plus, the winds would have to be very favorable for this to come out well. I can understand the situation you are in, Marco, living straight across from Oshkosh, or nearly so. My geographic location favors the southern go-around, even though it adds about 45 minutes to the flight for me. But that's an easy, non-puckering, flight for me....pretty much over farm land all the way....and one that I'll be making this Friday if the weather holds, and there's snow at Pioneer Airport.  (Annual Ski-plane Fly-in there)
  
  Lynn Matteson
  Kitfox IV Speedster, taildragger
  Jabiru 2200, #2062
  Prince prop 64 x 30, P-tip
  Electroair direct-fire ignition system
  Rotec TBI-40 injection (sleeved to 36mm)
  Status: flying with 1216 hrs... (since 3-27-2006)
  
  
  
  
  On Jan 15, 2012, at 10:11 AM, Marco Menezes wrote:
  
 > 
 > 
 > I appreciate your sentiments Mike and Lowell and rest assured, alot of thought went into the initial decision to fly over the big water. At the end I had enough confidence in my airplane to decide that the risk of engine failure occurring precisely during the 30 minutes I was over water was very small. As an added precaution, I attained 10k MSL before going "feet wet" calculating that, worst case scenario, I could glide to a beach landing on either side. Finally, concluding that the longer any flight, the higher the risk, the much shorter over-water route seemed natural.
 > 
 > Marco Menezes N99KX
 > Model 2 582-90 C-Box 3:1
 > Hersey, MI
 > 
 > On Jan 14, 2012, at 9:32 PM, "Lowell Fitt" <lcfitt(at)sbcglobal.net> wrote:
 > 
 >> 
 >> 
 >> This bit of wisdom reminds me of the question my wife asked when we did our emergency landing that destroyed our airplane and put both of us in the hospital.  We were less than fifteen minutes out of Cameron Park in the foothills of the Sierras on our way to Idaho for the factory fly-in.  The question, " What would have happened if we had had to put the airplane down 30 minutes later.  Well we were on the ground less than a mile from EMTs at a fire station.  A sheriffs deputy was on scene within five minutes. Thirty minutes later we would have been over the Desolation Wilderness just West of Lake Tahoe.  If lucky, a back packer on scene within an hour.  No advice offered, but I suppose the risk management might be a little tighter next time.  Within a month or so of flying the New Model IV.
 >> Lowell
 >> 
 >> --------------------------------------------------
 >> From: "Michael Gibbs" <MichaelGibbs(at)cox.net>
 >> Sent: Saturday, January 14, 2012 5:44 PM
 >> To: <kitfox-list(at)matronics.com>
 >> Subject: Re: Re: Kitfox-List Digest: 1 Msgs - 01/09/12
 >> 
 >>> 
 >>> 
 >>> Flying is all about risk management.  Risk can be avoided, mitigated or ignored (i.e., go around the lake, wear an exposure suit, or rely on the probability of having trouble over the water being very, very small).
 >>> 
 >>> You have to admit, though, Marco, that crashing next to your home airport there's probably help nearby and they typically can get to you quickly. And you'll be able to breathe while waiting for them. With average water temperatures in the 40F-50F range, if you end up in the drink you'll only last about 30-60 minutes before you are exhausted and/or unconscious--any rescue will have to be there before that happens.
 >>> 
 >>> Mike G.
 >>> N728KF, Kitfox IV-1200 Speedster
 >>> Phoenix, AZ
 >>> 
 >>> 
 >>>> 2 round trips to OSH, crossing Lake Michigan at its narrowest point from Cape Sable, MI to Manitowoc, WI. Not more than 30 minutes over water each way and in contact with lake reporting service the entire time. For me it shaves hours off the trip. Risky? Perhaps but some might argue no more so than 30 minutes in the pattern at your favorite airport.
 >>>> 
 >>>> Marco Menezes N99KX
 >>>> Model 2 582-90 C-box 3:1 w/clutch
 >>>> Hersey, MI
 >>>> 
 >>>> On Jan 10, 2012, at 5:53 PM, Patrick Reilly <<mailto:patreilly43(at)gmail.com>patreilly43(at)gmail.com> wrote:
 >>>> 
 >>>>> Marco, Did you cross Lake MI?
 >>>>> 
 >>>>> Pat Reilly
 >>>>> Mod 3 582 Rebuilt
 >>>>> Rockford, IL
 >>> 
 >>> 
 >>> 
 >>> 
 >> 
 >> 
 >> 
 >> 
 > 
 > 
 > 
 > 
 > 
  
  
  
  
  
 
 | 	 
 
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |