 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
mburbidg(at)gmail.com
Guest
|
 Posted: Sun Jul 08, 2012 7:48 pm Post subject: Bending ring terminals on superflex-battery cables... |
 |
|
Is it acceptable to put a 90 degree bend in the ring terminals on the superflex-battery cables from B&C so that the cable attaches to terminals without tension?
Michael-
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
bobnoffs
Joined: 04 Jul 2012
Posts: 132
Location: northern wi.
|
| Posted: Mon Jul 09, 2012 3:33 am Post subject: Bending ring terminals on superflex-battery cables... |
|
|
i would bend it once but never again after that. lets see what the expperts say.
bob noffs
On Sun, Jul 8, 2012 at 10:44 PM, Michael Burbidge <mburbidg(at)gmail.com (mburbidg(at)gmail.com)> wrote:
[quote]--> AeroElectric-List message posted by: Michael Burbidge <mburbidg(at)gmail.com (mburbidg(at)gmail.com)>
Is it acceptable to put a 90 degree bend in the ring terminals on the superflex-battery cables from B&C so that the cable attaches to terminals without tension?
Michael-
===========
-List" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
stuart(at)stuarthutchison
Guest
|
| Posted: Mon Jul 09, 2012 4:15 am Post subject: Bending ring terminals on superflex-battery cables... |
|
|
If you're tempted to anneal, keep in mind that that cold-worked copper (such as spark plug seals) is annealed by quenching rather than slow cooling like most other metals. The heat required to anneal would need to be quenched to avoid damage to the insulation anyway !
Cheers, Stu
From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of bob noffs
Sent: Monday, July 09, 2012 9:30 PM
To: aeroelectric-list(at)matronics.com
Subject: Re: AeroElectric-List: Bending ring terminals on superflex-battery cables...
i would bend it once but never again after that. lets see what the expperts say.
bob noffs
On Sun, Jul 8, 2012 at 10:44 PM, Michael Burbidge <mburbidg(at)gmail.com (mburbidg(at)gmail.com)> wrote:
[quote]--> AeroElectric-List message posted by: Michael Burbidge <mburbidg(at)gmail.com (mburbidg(at)gmail.com)>
Is it acceptable to put a 90 degree bend in the ring terminals on the superflex-battery cables from B&C so that the cable attaches to terminals without tension?
Michael[b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
