Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Modifying 12V LED Strip Lighting to work in 24/28V Aircraft

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
wtmills



Joined: 05 Feb 2007
Posts: 32

PostPosted: Sun Jul 29, 2012 7:36 am    Post subject: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft Reply with quote

On Sat, Jul 28, 2012 at 11:35 PM, you wrote

---------------snip-------------- 
Quote:
One thing to remember is that the number of LED's in each of the strips must be the same
-----------snip----------- 

Not to worry, Eric noted this on his pdf below.
Bill
SF bay area
 
[quote] > Attachments:
>
> http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28_volts_196.pdf
>[b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
JLuckey(at)pacbell.net
Guest





PostPosted: Sun Jul 29, 2012 10:37 am    Post subject: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft Reply with quote

Are the LEDs shown in that PDF drawn w/ the correct polarity??


From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Bill
Sent: Sunday, July 29, 2012 08:35
To: aeroelectric-list(at)matronics.com
Subject: Re: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft



On Sat, Jul 28, 2012 at 11:35 PM, you wrote


---------------snip--------------

Quote:
One thing to remember is that the number of LED's in each of the strips must be the same

-----------snip-----------



Not to worry, Eric noted this on his pdf below.



Bill

SF bay area


Quote:

Quote:
Attachments:
>

> http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28_volts_196.pdf
> http://www.matronics.com/Navigator?AeroElectric-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9

No virus found in this message.
Checked by AVG - www.avg.com
07/28/12 [quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
henador_titzoff(at)yahoo.
Guest





PostPosted: Sun Jul 29, 2012 11:48 am    Post subject: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft Reply with quote

Good catch, Jeff. I guess you were Luckey, huh? Good job!

Henador Titzoff
--- On Sun, 7/29/12, Jeff Luckey <JLuckey(at)pacbell.net> wrote:
Quote:

From: Jeff Luckey <JLuckey(at)pacbell.net>
Subject: RE: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft
To: aeroelectric-list(at)matronics.com
Date: Sunday, July 29, 2012, 11:36 AM


Are the LEDs shown in that PDF drawn w/ the correct polarity??


From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Bill
Sent: Sunday, July 29, 2012 08:35
To: aeroelectric-list(at)matronics.com
Subject: Re: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft



On Sat, Jul 28, 2012 at 11:35 PM, you wrote


---------------snip--------------

Quote:
One thing to remember is that the number of LED's in each of the strips must be the same

-----------snip-----------



Not to worry, Eric noted this on his pdf below.



Bill

SF bay area


Quote:

Quote:
Attachments:
>

> http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28_volts_196.pdf
> http://www.matronics.com/Navigator?AeroElectric-Listhttp://forums.matronics.com
0
Quote:
1
Quote:
2

No virus found in this message.
Checked by AVG - www.avg.com
07/28/12
Quote:
3

[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
JLuckey(at)pacbell.net
Guest





PostPosted: Sun Jul 29, 2012 12:18 pm    Post subject: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft Reply with quote

What’s that old saying? It’s better to be good than lucky. However, in my case, I’m always Luckey Wink


From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Henador Titzoff
Sent: Sunday, July 29, 2012 12:47
To: aeroelectric-list(at)matronics.com
Subject: RE: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft


Good catch, Jeff. I guess you were Luckey, huh? Good job!

Henador Titzoff


--- On Sun, 7/29/12, Jeff Luckey <JLuckey(at)pacbell.net> wrote:

From: Jeff Luckey <JLuckey(at)pacbell.net>
Subject: RE: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft
To: aeroelectric-list(at)matronics.com
Date: Sunday, July 29, 2012, 11:36 AM
Are the LEDs shown in that PDF drawn w/ the correct polarity??


From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Bill
Sent: Sunday, July 29, 2012 08:35
To: aeroelectric-list(at)matronics.com
Subject: Re: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft



On Sat, Jul 28, 2012 at 11:35 PM, you wrote


---------------snip--------------

Quote:
One thing to remember is that the number of LED's in each of the strips must be the same

-----------snip-----------



Not to worry, Eric noted this on his pdf below.



Bill

SF bay area


Quote:

Quote:
Attachments:
>

> http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28_volts_196.pdf
> http://www.matronics.com/Navigator?AeroElectric-Listhttp://forums.matronics.comhttp://www.matronics.com/contribution


No virus found in this message.
Checked by AVG - www.avg.com
07/28/12



[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group