 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
lancegoddard(at)mac.com
Guest
|
 Posted: Wed Aug 08, 2012 1:22 pm Post subject: Missing Skystar Wheel Pant Cutout Template |
 |
|
I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.
I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit.
Thanks,
Lance Goddard
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
 |
lwheat2083(at)gmail.com
Guest
|
| Posted: Wed Aug 08, 2012 1:47 pm Post subject: Missing Skystar Wheel Pant Cutout Template |
|
|
Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for.
On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.
I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit.
Thanks,
Lance Goddard
|
--
Larry Wheat
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
lancegoddard(at)mac.com
Guest
|
| Posted: Wed Aug 08, 2012 2:09 pm Post subject: Missing Skystar Wheel Pant Cutout Template |
|
|
That sounds great, Larry. Thanks very much. My templates were from Model II while the manual is for Model III.
My email lancegoddard(at)mac.com. Just looked for and found your videos on youtube. Will check them out.
Lance
On Aug 08, 2012, at 02:46 PM, Larry Wheat <lwheat2083(at)gmail.com> wrote:
| Quote: | Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for.
On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.
I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit.
Thanks,
Lance Goddard
|
--
Larry Wheat
| Quote: | | ta-mce-href="http://www.matronics.com/Navigator?Pulsar-List">http://www..com" data-mce-href="http://forums.matronics.com">http://forums.matronic" data-mce-href="http://www.matronics.com/contribution">http://www.matro=================== |
|
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
lwheat2083(at)gmail.com
Guest
|
| Posted: Wed Aug 08, 2012 2:30 pm Post subject: Missing Skystar Wheel Pant Cutout Template |
|
|
I could not find the template but I have the pants almost ready to go on so I traced the cutout for mine. Do you have the single fiberglas gear or the two piece.
On Wed, Aug 8, 2012 at 3:08 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | That sounds great, Larry. Thanks very much. My templates were from Model II while the manual is for Model III.
My email lancegoddard(at)mac.com (lancegoddard(at)mac.com). Just looked for and found your videos on youtube. Will check them out.
Lance
On Aug 08, 2012, at 02:46 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for.
On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.
I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit.
Thanks,
Lance Goddard
|
--
Larry Wheat
|
|
--
Larry Wheat
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
lancegoddard(at)mac.com
Guest
|
| Posted: Wed Aug 08, 2012 2:52 pm Post subject: Missing Skystar Wheel Pant Cutout Template |
|
|
Single piece. Do appreciate this.
sent from my iPhone
On Aug 8, 2012, at 3:29 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | I could not find the template but I have the pants almost ready to go on so I traced the cutout for mine. Do you have the single fiberglas gear or the two piece.
On Wed, Aug 8, 2012 at 3:08 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | That sounds great, Larry. Thanks very much. My templates were from Model II while the manual is for Model III.
My email lancegoddard(at)mac.com (lancegoddard(at)mac.com). Just looked for and found your videos on youtube. Will check them out.
Lance
On Aug 08, 2012, at 02:46 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for.
On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.
I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit.
Thanks,
Lance Goddard
|
--
Larry Wheat
|
|
--
Larry Wheat
|
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
lwheat2083(at)gmail.com
Guest
|
| Posted: Wed Aug 08, 2012 3:01 pm Post subject: Missing Skystar Wheel Pant Cutout Template |
|
|
Then cut to the outside of the line you should be good. Cheers N852LW
On Wed, Aug 8, 2012 at 3:51 PM, Lance Goddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | Single piece. Do appreciate this.
sent from my iPhone
On Aug 8, 2012, at 3:29 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | I could not find the template but I have the pants almost ready to go on so I traced the cutout for mine. Do you have the single fiberglas gear or the two piece.
On Wed, Aug 8, 2012 at 3:08 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | That sounds great, Larry. Thanks very much. My templates were from Model II while the manual is for Model III.
My email lancegoddard(at)mac.com (lancegoddard(at)mac.com). Just looked for and found your videos on youtube. Will check them out.
Lance
On Aug 08, 2012, at 02:46 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for.
On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.
I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit.
Thanks,
Lance Goddard
|
--
Larry Wheat
|
|
--
Larry Wheat
|
|
--
Larry Wheat
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
lancegoddard(at)mac.com
Guest
|
| Posted: Sat Aug 11, 2012 6:50 am Post subject: Missing Skystar Wheel Pant Cutout Template |
|
|
It looks like you are referring to a drawing or sketch here, Larry. Maybe you sent it and Matronics doesn't allow for graphics or pictures. Not sure. Can you send directly to lancegoddard(at)mac.com? Maybe then I'll get it.
Thanks,
Lance
On Aug 08, 2012, at 04:00 PM, Larry Wheat <lwheat2083(at)gmail.com> wrote:
| Quote: | Then cut to the outside of the line you should be good. Cheers N852LW
On Wed, Aug 8, 2012 at 3:51 PM, Lance Goddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | Single piece. Do appreciate this.
sent from my iPhone
On Aug 8, 2012, at 3:29 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | I could not find the template but I have the pants almost ready to go on so I traced the cutout for mine. Do you have the single fiberglas gear or the two piece.
On Wed, Aug 8, 2012 at 3:08 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | That sounds great, Larry. Thanks very much. My templates were from Model II while the manual is for Model III.
My email lancegoddard(at)mac.com (lancegoddard(at)mac.com). Just looked for and found your videos on youtube. Will check them out.
Lance
On Aug 08, 2012, at 02:46 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for.
On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.
I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit.
Thanks,
Lance Goddard
|
--
Larry Wheat
|
|
--
Larry Wheat
|
|
--
Larry Wheat
| Quote: | | http://www.matronics.com/Navigator?Pulsar-List _a href="http://forums.matronics.com" data-mce-href="http://forums.matr//www.matronics.com/contribution" data-mce-href="http://www.matronics.co===== |
|
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
lwheat2083(at)gmail.com
Guest
|
| Posted: Sat Aug 11, 2012 7:05 am Post subject: Missing Skystar Wheel Pant Cutout Template |
|
|
OK will do. Did you get the pics. N852LW
On Sat, Aug 11, 2012 at 7:49 AM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | It looks like you are referring to a drawing or sketch here, Larry. Maybe you sent it and Matronics doesn't allow for graphics or pictures. Not sure. Can you send directly to lancegoddard(at)mac.com (lancegoddard(at)mac.com)? Maybe then I'll get it.
Thanks,
Lance
On Aug 08, 2012, at 04:00 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | Then cut to the outside of the line you should be good. Cheers N852LW
On Wed, Aug 8, 2012 at 3:51 PM, Lance Goddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | Single piece. Do appreciate this.
sent from my iPhone
On Aug 8, 2012, at 3:29 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | I could not find the template but I have the pants almost ready to go on so I traced the cutout for mine. Do you have the single fiberglas gear or the two piece.
On Wed, Aug 8, 2012 at 3:08 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | That sounds great, Larry. Thanks very much. My templates were from Model II while the manual is for Model III.
My email lancegoddard(at)mac.com (lancegoddard(at)mac.com). Just looked for and found your videos on youtube. Will check them out.
Lance
On Aug 08, 2012, at 02:46 PM, Larry Wheat <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:
| Quote: | Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for.
On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard <lancegoddard(at)mac.com (lancegoddard(at)mac.com)> wrote:
| Quote: | I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.
I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit.
Thanks,
Lance Goddard
|
--
Larry Wheat
|
|
--
Larry Wheat
|
|
--
Larry Wheat
|
|
--
Larry Wheat
[quote][b]
| | - The Matronics Pulsar-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
