 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
|
 Posted: Sun Feb 03, 2013 2:56 pm Post subject: External Flight Plans - Dynon Skyview/Garmin 696 |
 |
|
Dear Listers,
Below is a dialog that I'm currently having with Dynon technical support regarding the support for External Flight Plans on the Dynon Skyview. I have a Garmin 696 connected serially to the Dynon and use it for primary GPS positional data. I would like to also have it transfer the current flight plan data as its a LOT easier to look up remote airports, etc. on the Garmin696. But, for some reason, the flight plan data doesn't seem to propagate to the Skyview; I can only assume because the Dynon is ignoring the GPRMB NMEA0182 data fields.
In contrast, I have a King Skymap IIIc connected to the GRT HXs in the RV-8 (for testing) and I am able to easily get external flight plan data from the Skymap to the GRT HX over the serial line (see screen shots)
Finally, with the new ADSB receiver on the Skyview, I'm no longer getting Traffic data on the Garmin 696. With just the Mode S transponder, I get traffic targets when I'm in traffic areas so the TIS data link (Skyvew->Garmin696) seems to be working. But as soon as I enable the ADSB receiver, I no longer get the traffic on the Garmin 696 even though the ADSB traffic is showing up on the Skyview Map and PDF displays.
Below are some composite screen shots I made for Dynon with embedded comments and documentation to describe what I'm seeing. I thought I'd share with the rest of the group in case someone maybe had some feedback or thoughts.
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 120+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
At 10:36 AM 2/1/2013 Friday, you wrote:
[quote]Matt,
Please do send some screen shots. We will fly a flight plan from the Garmin. Do you see the CDI on the HSI?
I can make sense out of this with a picture.
Mike H
Dynon Avionics Technical Support
support(at)dynonavionics.com
Phone: 425-402-0433 - 07:00-17:00 Pacific weekdays
---
--
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
| Description: |
|
| Filesize: |
786.63 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
659.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
467.81 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
545.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
458.21 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
315.56 KB |
| Viewed: |
3138 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
 |
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
|
| Posted: Sun Feb 03, 2013 2:56 pm Post subject: External Flight Plans - Dynon Skyview/Garmin 696 |
|
|
Dear Listers,
Below is a dialog that I'm currently having with Dynon technical support regarding the support for External Flight Plans on the Dynon Skyview. I have a Garmin 696 connected serially to the Dynon and use it for primary GPS positional data. I would like to also have it transfer the current flight plan data as its a LOT easier to look up remote airports, etc. on the Garmin696. But, for some reason, the flight plan data doesn't seem to propagate to the Skyview; I can only assume because the Dynon is ignoring the GPRMB NMEA0182 data fields.
In contrast, I have a King Skymap IIIc connected to the GRT HXs in the RV-8 (for testing) and I am able to easily get external flight plan data from the Skymap to the GRT HX over the serial line (see screen shots)
Finally, with the new ADSB receiver on the Skyview, I'm no longer getting Traffic data on the Garmin 696. With just the Mode S transponder, I get traffic targets when I'm in traffic areas so the TIS data link (Skyvew->Garmin696) seems to be working. But as soon as I enable the ADSB receiver, I no longer get the traffic on the Garmin 696 even though the ADSB traffic is showing up on the Skyview Map and PDF displays.
Below are some composite screen shots I made for Dynon with embedded comments and documentation to describe what I'm seeing. I thought I'd share with the rest of the group in case someone maybe had some feedback or thoughts.
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 120+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
At 10:36 AM 2/1/2013 Friday, you wrote:
[quote]Matt,
Please do send some screen shots. We will fly a flight plan from the Garmin. Do you see the CDI on the HSI?
I can make sense out of this with a picture.
Mike H
Dynon Avionics Technical Support
support(at)dynonavionics.com
Phone: 425-402-0433 - 07:00-17:00 Pacific weekdays
---
--
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
| Description: |
|
| Filesize: |
786.63 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
659.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
467.81 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
545.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
458.21 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
315.56 KB |
| Viewed: |
3138 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
|
| Posted: Sun Feb 03, 2013 2:56 pm Post subject: External Flight Plans - Dynon Skyview/Garmin 696 |
|
|
Dear Listers,
Below is a dialog that I'm currently having with Dynon technical support regarding the support for External Flight Plans on the Dynon Skyview. I have a Garmin 696 connected serially to the Dynon and use it for primary GPS positional data. I would like to also have it transfer the current flight plan data as its a LOT easier to look up remote airports, etc. on the Garmin696. But, for some reason, the flight plan data doesn't seem to propagate to the Skyview; I can only assume because the Dynon is ignoring the GPRMB NMEA0182 data fields.
In contrast, I have a King Skymap IIIc connected to the GRT HXs in the RV-8 (for testing) and I am able to easily get external flight plan data from the Skymap to the GRT HX over the serial line (see screen shots)
Finally, with the new ADSB receiver on the Skyview, I'm no longer getting Traffic data on the Garmin 696. With just the Mode S transponder, I get traffic targets when I'm in traffic areas so the TIS data link (Skyvew->Garmin696) seems to be working. But as soon as I enable the ADSB receiver, I no longer get the traffic on the Garmin 696 even though the ADSB traffic is showing up on the Skyview Map and PDF displays.
Below are some composite screen shots I made for Dynon with embedded comments and documentation to describe what I'm seeing. I thought I'd share with the rest of the group in case someone maybe had some feedback or thoughts.
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 120+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
At 10:36 AM 2/1/2013 Friday, you wrote:
[quote]Matt,
Please do send some screen shots. We will fly a flight plan from the Garmin. Do you see the CDI on the HSI?
I can make sense out of this with a picture.
Mike H
Dynon Avionics Technical Support
support(at)dynonavionics.com
Phone: 425-402-0433 - 07:00-17:00 Pacific weekdays
---
--
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
| Description: |
|
| Filesize: |
786.63 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
659.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
467.81 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
545.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
458.21 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
315.56 KB |
| Viewed: |
3138 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
|
| Posted: Sun Feb 03, 2013 2:58 pm Post subject: External Flight Plans - Dynon Skyview/Garmin 696 |
|
|
Dear Listers,
Below is a dialog that I'm currently having with Dynon technical support regarding the support for External Flight Plans on the Dynon Skyview. I have a Garmin 696 connected serially to the Dynon and use it for primary GPS positional data. I would like to also have it transfer the current flight plan data as its a LOT easier to look up remote airports, etc. on the Garmin696. But, for some reason, the flight plan data doesn't seem to propagate to the Skyview; I can only assume because the Dynon is ignoring the GPRMB NMEA0182 data fields.
In contrast, I have a King Skymap IIIc connected to the GRT HXs in the RV-8 (for testing) and I am able to easily get external flight plan data from the Skymap to the GRT HX over the serial line (see screen shots)
Finally, with the new ADSB receiver on the Skyview, I'm no longer getting Traffic data on the Garmin 696. With just the Mode S transponder, I get traffic targets when I'm in traffic areas so the TIS data link (Skyvew->Garmin696) seems to be working. But as soon as I enable the ADSB receiver, I no longer get the traffic on the Garmin 696 even though the ADSB traffic is showing up on the Skyview Map and PDF displays.
Below are some composite screen shots I made for Dynon with embedded comments and documentation to describe what I'm seeing. I thought I'd share with the rest of the group in case someone maybe had some feedback or thoughts.
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 120+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
At 10:36 AM 2/1/2013 Friday, you wrote:
[quote]Matt,
Please do send some screen shots. We will fly a flight plan from the Garmin. Do you see the CDI on the HSI?
I can make sense out of this with a picture.
Mike H
Dynon Avionics Technical Support
support(at)dynonavionics.com
Phone: 425-402-0433 - 07:00-17:00 Pacific weekdays
---
--
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
| Description: |
|
| Filesize: |
786.63 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
659.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
467.81 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
545.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
458.21 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
315.56 KB |
| Viewed: |
3138 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
|
| Posted: Sun Feb 03, 2013 2:58 pm Post subject: External Flight Plans - Dynon Skyview/Garmin 696 |
|
|
Dear Listers,
Below is a dialog that I'm currently having with Dynon technical support regarding the support for External Flight Plans on the Dynon Skyview. I have a Garmin 696 connected serially to the Dynon and use it for primary GPS positional data. I would like to also have it transfer the current flight plan data as its a LOT easier to look up remote airports, etc. on the Garmin696. But, for some reason, the flight plan data doesn't seem to propagate to the Skyview; I can only assume because the Dynon is ignoring the GPRMB NMEA0182 data fields.
In contrast, I have a King Skymap IIIc connected to the GRT HXs in the RV-8 (for testing) and I am able to easily get external flight plan data from the Skymap to the GRT HX over the serial line (see screen shots)
Finally, with the new ADSB receiver on the Skyview, I'm no longer getting Traffic data on the Garmin 696. With just the Mode S transponder, I get traffic targets when I'm in traffic areas so the TIS data link (Skyvew->Garmin696) seems to be working. But as soon as I enable the ADSB receiver, I no longer get the traffic on the Garmin 696 even though the ADSB traffic is showing up on the Skyview Map and PDF displays.
Below are some composite screen shots I made for Dynon with embedded comments and documentation to describe what I'm seeing. I thought I'd share with the rest of the group in case someone maybe had some feedback or thoughts.
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 120+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
At 10:36 AM 2/1/2013 Friday, you wrote:
[quote]Matt,
Please do send some screen shots. We will fly a flight plan from the Garmin. Do you see the CDI on the HSI?
I can make sense out of this with a picture.
Mike H
Dynon Avionics Technical Support
support(at)dynonavionics.com
Phone: 425-402-0433 - 07:00-17:00 Pacific weekdays
---
--
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
| Description: |
|
| Filesize: |
786.63 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
659.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
467.81 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
545.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
458.21 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
315.56 KB |
| Viewed: |
3138 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
|
| Posted: Sun Feb 03, 2013 2:58 pm Post subject: External Flight Plans - Dynon Skyview/Garmin 696 |
|
|
Dear Listers,
Below is a dialog that I'm currently having with Dynon technical support regarding the support for External Flight Plans on the Dynon Skyview. I have a Garmin 696 connected serially to the Dynon and use it for primary GPS positional data. I would like to also have it transfer the current flight plan data as its a LOT easier to look up remote airports, etc. on the Garmin696. But, for some reason, the flight plan data doesn't seem to propagate to the Skyview; I can only assume because the Dynon is ignoring the GPRMB NMEA0182 data fields.
In contrast, I have a King Skymap IIIc connected to the GRT HXs in the RV-8 (for testing) and I am able to easily get external flight plan data from the Skymap to the GRT HX over the serial line (see screen shots)
Finally, with the new ADSB receiver on the Skyview, I'm no longer getting Traffic data on the Garmin 696. With just the Mode S transponder, I get traffic targets when I'm in traffic areas so the TIS data link (Skyvew->Garmin696) seems to be working. But as soon as I enable the ADSB receiver, I no longer get the traffic on the Garmin 696 even though the ADSB traffic is showing up on the Skyview Map and PDF displays.
Below are some composite screen shots I made for Dynon with embedded comments and documentation to describe what I'm seeing. I thought I'd share with the rest of the group in case someone maybe had some feedback or thoughts.
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 120+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
At 10:36 AM 2/1/2013 Friday, you wrote:
[quote]Matt,
Please do send some screen shots. We will fly a flight plan from the Garmin. Do you see the CDI on the HSI?
I can make sense out of this with a picture.
Mike H
Dynon Avionics Technical Support
support(at)dynonavionics.com
Phone: 425-402-0433 - 07:00-17:00 Pacific weekdays
---
--
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
| Description: |
|
| Filesize: |
786.63 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
659.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
467.81 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
545.76 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
458.21 KB |
| Viewed: |
3138 Time(s) |
|
| Description: |
|
| Filesize: |
315.56 KB |
| Viewed: |
3138 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
