Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Broken Wheel Pants

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

cv93436(at)windstream.net
Guest

Posted: Mon Feb 18, 2013 2:42 pm Post subject: Broken Wheel Pants

A lot of nose wheel pants  get cracked or broken on 10's.  A good fix is to make sure there is enough  tire clearance (for squashed nose wheels on nose wheel landing--I would  recommend 5/8--3/4 inch clearance), then repair with a couple layers of  fiberglass and a molded piece of .025" or .032" aluminum to fit the inside of  the nose fairing.  Shape the aluminum first cutting out the tire  opening.  Drill your rivet holes and counter sink.  Then after  applying the fiberglass with it still wet, rivet the molded aluminum over  it.  Make sure you get the aluminum attached to the vertical wall in the  fairing so it has some real support.

   [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum