  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		jconnell(at)fmwildblue.co Guest
 
 
 
 
 
  | 
		
			
				 Posted: Thu Mar 28, 2013 6:32 am    Post subject: Kitfox-List Digest: 1 Msgs - 03/27/13 | 
				     | 
			 
			
				
  | 
			 
			
				Found this on the internet Bob:
   
  Posted: Wed Jan 11, 2012 3:34 pm    Post subject: Radiator  Cap for Rotax 912       After a little research,  found that the 912 uses a pressure of 1.2 bar for the radiator cap. 1.2 bars is  equivalent to 17.4 pound per square inches. 
   
  18 psi caps by Stant are available from amazon.com: 
  http://www.amazon.com/Stant-10234-Radiator-Cap-PSI/dp/B000B8JUG6   
   
  17 psi caps are also available from amazon.com: 
  http://www.amazon.com/Stant-10251-Radiator-Cap-PSI/dp/B000C8226K   
   
  I’d try one of these rater than shelling out $80. May be that your local  auto parts store can get one for you without the shipping charge. 
   
  John Hart 
  KFIV 
  Wilburton, OK
   
   
  Time: 07:46:18 PM PST US
  From: "Bob & Toodie" <rtav8or2(at)psln.com>
  Subject: Radiator Cap
   
  Hello fox flyers. Quite awhile back there was a mini discussion on the  
  STANT pressure cap for the fluid tank on the 912 engine. did anybody 
  archive that  Part number? If you  have the number it would be  
  appreciated, this thing is driving me nuts, of course I am AB normal 
  anyway.  Our computer crashed and I lost all Data that I have been  
  gathering.  
  Even in this very cold weather up here I seem to be losing pressure/ 
  and some coolant.   Thanks very much.
   
  Bob & Toodie
  KF  4/1200
  O02.  
   
   
   
   
    [quote][b]
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		redrocketrider
 
 
  Joined: 13 May 2011 Posts: 67 Location: Nervino airport
  | 
		
			
				 Posted: Thu Mar 28, 2013 8:52 am    Post subject: Kitfox-List Digest: 1 Msgs - 03/27/13 | 
				     | 
			 
			
				
  | 
			 
			
				Hi J&J Thanks for the link, will continue the search  for this mystery mini cap.  Bob
   
 
   From: Joe & Jan Connell (jconnell(at)fmwildblue.com) 
  Sent: Thursday, March 28, 2013 7:31 AM
  To: kitfox-list(at)matronics.com (kitfox-list(at)matronics.com) ; rtav8or2(at)psln.com (rtav8or2(at)psln.com)  
  Subject: Re: Kitfox-List Digest: 1 Msgs -  03/27/13
  
 
    Found this on the internet Bob:
   
  Posted: Wed Jan 11, 2012 3:34 pm    Post subject: Radiator  Cap for Rotax 912       After a little research,  found that the 912 uses a pressure of 1.2 bar for the radiator cap. 1.2 bars is  equivalent to 17.4 pound per square inches. 
   
  18 psi caps by Stant are available from amazon.com: 
  http://www.amazon.com/Stant-10234-Radiator-Cap-PSI/dp/B000B8JUG6   
   
  17 psi caps are also available from amazon.com: 
  http://www.amazon.com/Stant-10251-Radiator-Cap-PSI/dp/B000C8226K   
   
  I’d try one of these rater than shelling out $80. May be that your local  auto parts store can get one for you without the shipping charge. 
   
  John Hart 
  KFIV 
  Wilburton, OK
   
   
  Time: 07:46:18 PM PST US
  From: "Bob & Toodie" <rtav8or2(at)psln.com>
  Subject: Radiator Cap
   
  Hello fox flyers. Quite awhile back there was a mini discussion on the  
  STANT pressure cap for the fluid tank on the 912 engine. did anybody 
  archive that  Part number? If you  have the number it would be  
  appreciated, this thing is driving me nuts, of course I am AB normal 
  anyway.  Our computer crashed and I lost all Data that I have been  
  gathering.  
  Even in this very cold weather up here I seem to be losing pressure/ 
  and some coolant.   Thanks very much.
   
  Bob & Toodie
  KF  4/1200
  O02.  
   
   
   
   
 [quote]
 
 href="http://www.matronics.com/Navigator?Kitfox-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com
 href="http://www.matronics.com/contribution">http://www.matronics.com/c
 [b]
 
  |  | - The Matronics Kitfox-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kitfox-List |  
  |  
 
 
 
 
  _________________ Keep the dirty side down/Blue skies. Bob | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |