Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Organization of power bus

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
dustinp(at)hughes.net
Guest





PostPosted: Mon Jun 12, 2006 12:24 pm    Post subject: Organization of power bus Reply with quote

I seem to recall reading a recommendation on this list of a particular order in which various electrical loads should be placed on the power bus in order to minimize interference / noise propagated to other equipment whose power came from the same bus.
For instance locating the power lead for the strobes, with its pulsating power requirement at one end of the bus or the other to lessen the effect on other equipment with power leads located before or after it on the bus.
I can't seem to find this info searching the archives, and wonder if anyone could refresh this info if in fact it actually is true.
 
Thanks
Dustin Paulson
GlaStar builder


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckollsr(at)cox.net
Guest





PostPosted: Mon Jun 12, 2006 5:07 pm    Post subject: Organization of power bus Reply with quote

At 03:20 PM 6/12/2006 -0500, you wrote:

Quote:
I seem to recall reading a recommendation on this list of a particular
order in which various electrical loads should be placed on the power bus
in order to minimize interference / noise propagated to other equipment
whose power came from the same bus.
For instance locating the power lead for the strobes, with its pulsating
power requirement at one end of the bus or the other to lessen the effect
on other equipment with power leads located before or after it on the bus.
I can't seem to find this info searching the archives, and wonder if
anyone could refresh this info if in fact it actually is true.

Not true.

Order your systems in any way that pleases you.

Bob . . .
---------------------------------------------------------
< What is so wonderful about scientific truth...is that >
< the authority which determines whether there can be >
< debate or not does not reside in some fraternity of >
< scientists; nor is it divine. The authority rests >
< with experiment. >
< --Lawrence M. Krauss >
---------------------------------------------------------


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group