Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Pizza wheel wanted

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

capedavis(at)yahoo.com
Guest

Posted: Fri Sep 21, 2012 7:08 pm Post subject: Pizza wheel wanted

Try a hockey puck! I was told they work great and dont wear at all, seriously

 

  

 Chris Davis

KXP 503 492 hrs

Glider Pilot

Disabled from crash building Firefly



    

From: Mark Shimei <mark.shimei(at)gmail.com>

To: kolb-list(at)matronics.com 

Sent: Friday, September 21, 2012 10:32 PM

Subject: Pizza wheel wanted

 Anyone got a left over pizza cutter tailwheel? I could use a spare for my ultrastar,not many snowmobile shops in central Florida carry them.

Thanks,Mark

[quote]

[b]

dpeters160(at)gmail.com
Guest

Posted: Sat Sep 22, 2012 5:58 am Post subject: Pizza wheel wanted

Mark, I just bought a replacement for my Ultrastar from a place called Dunn and Company; part number 2.00005.565. They were great to deal with. On Sep 21, 2012 7:37 PM, "Mark Shimei" <mark.shimei(at)gmail.com (mark.shimei(at)gmail.com)> wrote:[quote] Anyone got a left over pizza cutter tailwheel? I could use a spare for my ultrastar,not many snowmobile shops in central Florida carry them.

Thanks,Mark

   	  Quote: 	
		  



get="_blank">http://www.matronics.com/Navigator?Kolb-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	
[b]

Dennis Thate

Joined: 18 Nov 2010
Posts: 362

Posted: Sat Sep 22, 2012 7:49 am Post subject: Re: Pizza wheel wanted

I have one off my Firestar II that I will never use again. Any reasonable offer gets it.

_________________
Both optimists and pessimists contribute to our society. The optimist invents the airplane and the pessimist the parachute. ~Gil Stern

ulflyer(at)verizon.net
Guest

Posted: Sun Sep 23, 2012 7:52 am Post subject: Pizza wheel wanted

What about a roller blade wheel - I use that on my Hawk - my Hawk is not a tail wheel version, but roller blade wheels are tough and most have good bearings.  How fast would that sucker be spinning at 50 MPH.

 jerryb



 At 10:06 PM 9/21/2012, you wrote:

 [quote]Try a hockey puck! I was told they work great and dont wear at all, seriously

  

 Chris Davis

 KXP 503 492 hrs

 Glider Pilot

 Disabled from crash building Firefly

 From: Mark Shimei <mark.shimei(at)gmail.com>

 To: kolb-list(at)matronics.com 

 Sent: Friday, September 21, 2012 10:32 PM

 Subject: Pizza wheel wanted

 

 Anyone got a left over pizza cutter tailwheel? I could use a spare for my ultrastar,not many snowmobile shops in central Florida carry them.

 Thanks,Mark



  	  Quote: 	
		  

[/b] 	




 

  	  Quote: 	
		  



Email Forum -



http://www.matronics.com/Navigator?Kolb-List

- MATRONICS WEB FORUMS -

http://forums.matronics.com

- List Contribution Web Site -

-Matt Dralle, List Admin.



http://www.matronics.com/contribution



[/b] 	
[b]

George Alexander

Joined: 10 Jan 2006
Posts: 245
Location: SW Florida

Posted: Sun Sep 23, 2012 9:10 am Post subject: Re: Pizza wheel wanted

 	  ulflyer(at)verizon.net wrote: 	
		  What about a roller blade wheel - I use that on my Hawk - my Hawk is not a tail wheel version, but roller blade wheels are tough and most have good bearings.  How fast would that sucker be spinning at 50 MPH.

 jerryb

< < <SNIP> > > 	




If'n you can't get the genuine thang from Kolb Aircraft, try the wheels for the little scooters.  5" dia, I think.  Friend put one on a MK II.  It was even color coordinated with his accent color (blue).  Fairly inexpensive and durable.  Don't think any mods were necessary.



To quote our friend Beauford .... "Worth what you paid for it".

_________________
George Alexander
FS II R503
E-LSA N709FS
http://www.oh2fly.net

HShack(at)aol.com
Guest

Posted: Sun Sep 23, 2012 11:06 am Post subject: Pizza wheel wanted

In a message dated 9/23/2012 1:13:02 P.M. Eastern Daylight Time,  gtalexander(at)att.net writes:

  	  Quote: 	
		  If'n you    can't get the genuine thang from Kolb Aircraft, try the wheels for the little    scooters.  5" dia, I think.  	
  

 I use one of those on my FS II.  It is larger than the pizza cutter   in diameter by maybe 1 1/2" and also in width by maybe 1/2".   Yes; they come in colors.

  

 There are 2 sizes; seems like there is a 100 mm and a 120 mm; I used the  larger.

  

 They have ball bearings.  The axle bore is either 6 mm or 8 mm- can't  remember which..

  

 Had to modify the original tailwheel bracket some; a little cutting and  welding was involved.

  

 I got lucky and bought 6 of them at Walmart for $6, on sale.

  

  

 Shack

 [quote][b]

wrk2win4u

Joined: 12 Nov 2011
Posts: 30

Posted: Wed Sep 26, 2012 8:14 am Post subject: Pizza wheel wanted

I'm not sure if you are still looking for a "pizza wheel". I have one on my Kolb Firestar II. It has some parts left that are not bent or broken. Send me an email if you need parts. wrk2win4u(at)msn.com (wrk2win4u(at)msn.com)

 

Kurt

 



From: HShack(at)aol.com

Date: Sun, 23 Sep 2012 15:03:42 -0400

Subject: Re: Re: Pizza wheel wanted

To: kolb-list(at)matronics.com



      

  

 In a message dated 9/23/2012 1:13:02 P.M. Eastern Daylight Time,  gtalexander(at)att.net writes:

  	  Quote: 	
		  If'n you    can't get the genuine thang from Kolb Aircraft, try the wheels for the little    scooters.  5" dia, I think.  	
  

 I use one of those on my FS II.  It is larger than the pizza cutter   in diameter by maybe 1 1/2" and also in width by maybe 1/2".   Yes; they come in colors.

  

 There are 2 sizes; seems like there is a 100 mm and a 120 mm; I used the  larger.

  

 They have ball bearings.  The axle bore is either 6 mm or 8 mm- can't  remember which..

  

 Had to modify the original tailwheel bracket some; a little cutting and  welding was involved.

  

 I got lucky and bought 6 of them at Walmart for $6, on sale.

  

  

 Shack

 [quote]



arget="_blank">http://www.matronics.com/Navigator?Kolb-List

http://forums.matronics.com

="_blank">http://www.matronics.com/contribution



[b]

Dennis Thate

Joined: 18 Nov 2010
Posts: 362

Posted: Mon Oct 01, 2012 1:29 am Post subject: Re: Pizza wheel wanted

The Infamous Pizza Wheel, up close & personal. Mine is still available.

Close-up.jpg

Description:

Filesize:

34.58 KB

Viewed:

9887 Time(s)

_________________
Both optimists and pessimists contribute to our society. The optimist invents the airplane and the pessimist the parachute. ~Gil Stern

wakataka

Joined: 11 Aug 2012
Posts: 48

Posted: Tue Jun 04, 2013 7:56 am Post subject: Re: Pizza wheel wanted

Dennis - 

Is that pizza cutter wheel still available? If so, you can contact me offline



wakataka at charter dot net



Thanks



Martin B.

Do not archive

_________________
There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.

Mark Twain

Dana

Joined: 13 Dec 2007
Posts: 1047
Location: Connecticut, USA

Posted: Tue Jun 04, 2013 8:45 am Post subject: Pizza wheel wanted

If not, try a snowmobile shop... it's a track roller.



 Dana



 At 11:56 AM 6/4/2013, wakataka wrote:

  	  Quote: 	
		  --> Kolb-List message posted by: "wakataka" <wakataka(at)charter.net>



 Dennis - 

 Is that pizza cutter wheel still available? If so, you can contact me offline 	


 --

 We are born naked, wet, and hungry.  Then things get worse.  

    [quote][b]

John Hauck

Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

Posted: Tue Jun 04, 2013 8:55 am Post subject: Pizza wheel wanted

If not, try a snowmobile shop... it's a track roller.



Dana



 Is that pizza cutter wheel still available? If so, you can contact me offline

 

……………………………………………………………….

  	  Quote: 	
		    Recommend giving Travis at Kolb Aircraft a call.  He may have them.  Email address for Customer Support at Kolb Aircraft Company: customersupport(at)kolbaircraft.com  Kolb Aircraft Company8375 Russell Dyche Hwy. 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  Recommend giving Travis at Kolb Aircraft a call.  He may have them. 	
0 	  Quote: 	
		  Recommend giving Travis at Kolb Aircraft a call.  He may have them. 	
1

  [quote][b]

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama

wakataka

Joined: 11 Aug 2012
Posts: 48

Posted: Tue Jun 04, 2013 9:17 am Post subject: Re: Pizza wheel wanted

I e-mailed Kolb a couple of weeks ago but got no response. 



There's no snowmobile shops nearby, so I went online and looked at about 50 different track wheels. I ordered one that looked to be the right part. When it arrived, it was the right dimensions, but it has no rubber on it. It's just a hard plastic wheel.



I like the looks of the one from Dunn and Co, but it would require some cutting and welding because it's 1/2" larger diameter than my bracket will accept. It also doesn't appear to have a sealed bearing, which could limit its longevity in the gritty environment where a tail wheel lives and works.



http://www.dunncasters.com/default.aspx?page=item%20detail&itemcode=2.00005.565



Martin B.

_________________
There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.

Mark Twain

Last edited by wakataka on Tue Jun 04, 2013 1:50 pm; edited 1 time in total

clydemacquarrie(at)eastli
Guest

Posted: Tue Jun 04, 2013 11:33 am Post subject: Pizza wheel wanted

I have a new wheel that came with the Kolb I now own and anyone can have it 

for the price of shipping. I replaced this wheel with the new version. 

E-mail me at clydemacquarrie(at)eastlink.ca



--------------------------------------------------

From: "wakataka" <wakataka(at)charter.net>

Sent: Tuesday, June 04, 2013 12:56 PM

To: <kolb-list(at)matronics.com>

Subject: Re: Pizza wheel wanted



 	  Quote: 	
		   



 Dennis -

 Is that pizza cutter wheel still available? If so, you can contact me 

 offline



 wakataka at charter dot net



 Thanks



 Martin B.

 Do not archive



 --------

 There is something fascinating about science. One gets such wholesale 

 returns of conjecture out of such a trifling investment of fact.



 Mark Twain





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=401978#401978

wakataka

Joined: 11 Aug 2012
Posts: 48

Posted: Tue Jun 04, 2013 1:47 pm Post subject: Re: Pizza wheel wanted

I'll take it!



I sent you an e-mail off-line.



Thanks



Martin B.



Do Not Archive

_________________
There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.

Mark Twain

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum