Matronics Email Lists :: View topic - LED similar to EL strip

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

LED similar to EL strip

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Mon Jun 17, 2013 11:20 am Post subject: LED similar to EL strip

At 08:58 PM 3/26/2013, you wrote:

  	  Quote: 	
		   

   Saw this item and thought of the EL strips that were so noisy.  This is listed as a flat LED. 

 	
 

   Some months back a List reader cited this LED lighting

   product in the Jameco catalog



  http://tinyurl.com/kero4v8



 [img]cid:.0[/img]



 I ordered one to get a looksee . . . received it a few days later. I

 was pursuing the bank statement and discovered that they comped me

 on the part . . . Thanks Greg!



 Here's JKL's data sheet on the product. 



  http://tinyurl.com/mvuazxh



 This is a strip array of led junctions . . . pretty tightly spaced.

 Estimate .08" apart. The assembly is rated at 10.5v, 350 mA or

 3.5 watts. Needless to say, the light output is considerable. This

 picture was taken at room ambient light; output from the lamp assembly

 stopped the camera way down.



 The backplane is aluminum sheet. This looks like it would be used

 for edge-lighting a display. Applications for our needs don't

 immediately come to mind. This is best driven by a constant current

 power supply like a BuckPuck or similar.



 If anyone has an idea where this particular product would fill

 the bill, drop me a note and I'll mail you this one.



 

 

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

783d3b1.jpg

Description:

Filesize:

159.25 KB

Viewed:

1226 Time(s)

raymondj(at)frontiernet.n
Guest

Posted: Mon Jun 17, 2013 11:50 am Post subject: LED similar to EL strip

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

raymondj(at)frontiernet.n
Guest

Posted: Mon Jun 17, 2013 12:12 pm Post subject: LED similar to EL strip

'Gotta remember to delete images when I       reply.

       

       How noisy is it.  Can it be easily dimmed?  I was thinking about       it for instrument panel lighting, like the EL strips.

        	  Quote: 	
		  Raymond Julian

Kettle River, MN.



"And you know that I could have me a million more friends,

and all I'd have to lose is my point of view." - John Prine 	
       On 06/17/2013 02:19 PM, Robert L. Nuckolls, III wrote:

     

     [quote]       At 08:58 PM 3/26/2013, you wrote:

        	  Quote: 	
		   

                    Saw this item and thought of the EL strips that were so             noisy.              This is listed as a flat LED. 

                           	
       

         Some months back a List reader cited this LED lighting

         product in the Jameco catalog

       

                http://tinyurl.com/kero4v8

       

       IMAGE DELETED 

       

       I ordered one to get a looksee . . . received it a few days later.       I

       was pursuing the bank statement and discovered that they comped me

       on the part . . . Thanks Greg!

       

       Here's JKL's data sheet on the product. 

       

                http://tinyurl.com/mvuazxh

       

       This is a strip array of led junctions . . . pretty tightly       spaced.

       Estimate .08" apart. The assembly is rated at 10.5v, 350 mA or

       3.5 watts. Needless to say, the light output is considerable. This

       picture was taken at room ambient light; output from the lamp       assembly

       stopped the camera way down.

       

       The backplane is aluminum sheet. This looks like it would be used

       for edge-lighting a display. Applications for our needs don't

       immediately come to mind. This is best driven by a constant       current

       power supply like a BuckPuck or similar.

       

       If anyone has an idea where this particular product would fill

       the bill, drop me a note and I'll mail you this one.

       

       

                

             Bob . . .                [b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum