Matronics Email Lists :: View topic - Using the OVM as a trigger for a hard disconnect of the B

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Using the OVM as a trigger for a hard disconnect of the B

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Thu Jun 13, 2013 4:44 am Post subject: Using the OVM as a trigger for a hard disconnect of the B

At 03:35 AM 6/13/2013, you wrote:

 	  Quote: 	
		  Listers,



With the internally regulated alternator scenario, in the event of a 

voltage spike or alternator runaway, what to do?

What about a master type relay on the B lead that is disconnected by the OVM?



Not a very clean solution, but is it doable?


	


   See figure Z-24 in the book.

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum