Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Aileron torque tube help

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
VHMUM(at)bigpond.com
Guest





PostPosted: Thu May 10, 2007 8:57 pm    Post subject: Aileron torque tube help Reply with quote

My Aileron torque tube rubs on the W-1013 which is the braket that is riveted to the rear wing spar that holds the Aileron on. Only in the downward position. Anyone else had that problem?

Chris
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jesse(at)saintaviation.co
Guest





PostPosted: Fri May 11, 2007 5:01 am    Post subject: Aileron torque tube help Reply with quote

Does it hit on the shop head of a rivet or on the actual shaft? If on the rivet, you could try flipping it over to see if the mfg head would provide better clearance. I may have seen this, but I think the problem went away when the controls were rigged.

Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of The McGough Family
Sent: Friday, May 11, 2007 12:57 AM
To: rv10-list(at)matronics.com
Subject: Aileron torque tube help


My Aileron torque tube rubs on the W-1013 which is the braket that is riveted to the rear wing spar that holds the Aileron on. Only in the downward position. Anyone else had that problem?



Chris
[quote] [b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
LloydDR(at)wernerco.com
Guest





PostPosted: Fri May 11, 2007 5:21 am    Post subject: Aileron torque tube help Reply with quote

Do you have both Aileron's on, and have verified full travel with both? They act as stops for each other and it might be rubbing now, and not when both are hooked up. Once you have both hooked up, you can relieve some of the distance with a file, just be careful not to scratch the paint...ask me how I know that painting and saving the finish is way too hard.
Dan
N289DT RV10E

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of The McGough Family
Sent: Friday, May 11, 2007 12:57 AM
To: rv10-list(at)matronics.com
Subject: Aileron torque tube help

My Aileron torque tube rubs on the W-1013 which is the braket that is riveted to the rear wing spar that holds the Aileron on. Only in the downward position. Anyone else had that problem?

Chris
[quote]

href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
href="http://forums.matronics.com">http://forums.matronics.com

[b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Vern(at)teclabsinc.com
Guest





PostPosted: Fri May 11, 2007 7:15 am    Post subject: Aileron torque tube help Reply with quote

I noticed the same interference after completing my wings. Van’s suggested adjusting the number and thicknesses of the washers between the two sides of the hinge, the inboard and outboard hinges and /or the torque tube rod end to shift the aileron and torque tube away from the W-1013. While making sure not to create any other interference.

The other challenge I had was the washers called out in section 21 did not capture the hinge pivot points and allowed the bolt to rotate inside the bearing ball. They said add more washers as needed. These suggestions seemed to help but I won’t know if this solves the problems until I get the wings installed and ailerons fully rigged.

Vern Smith (#324 tail cone attachment)


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Friday, May 11, 2007 6:22 AM
To: rv10-list(at)matronics.com
Subject: RE: Aileron torque tube help


Do you have both Aileron's on, and have verified full travel with both? They act as stops for each other and it might be rubbing now, and not when both are hooked up. Once you have both hooked up, you can relieve some of the distance with a file, just be careful not to scratch the paint...ask me how I know that painting and saving the finish is way too hard.
Dan
N289DT RV10E


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of The McGough Family
Sent: Friday, May 11, 2007 12:57 AM
To: rv10-list(at)matronics.com
Subject: Aileron torque tube help
My Aileron torque tube rubs on the W-1013 which is the braket that is riveted to the rear wing spar that holds the Aileron on. Only in the downward position. Anyone else had that problem?



Chris
Quote:
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-Listhref="http://forums.matronics.com">http://forums.matronics.com
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
john_rv10(at)yahoo.com
Guest





PostPosted: Fri May 11, 2007 11:20 am    Post subject: Aileron torque tube help Reply with quote

We had the same problem with our QB wings. What we noticed was that the aileron attach brackets on one wing in particular were not square to the rear spar. After we squared them up, the clearance was OK.

John Cleary (Fuse)


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Vern W. Smith
Sent: Saturday, 12 May 2007 1:15 AM
To: rv10-list(at)matronics.com
Subject: RE: Aileron torque tube help


I noticed the same interference after completing my wings. Van’s suggested adjusting the number and thicknesses of the washers between the two sides of the hinge, the inboard and outboard hinges and /or the torque tube rod end to shift the aileron and torque tube away from the W-1013. While making sure not to create any other interference.

The other challenge I had was the washers called out in section 21 did not capture the hinge pivot points and allowed the bolt to rotate inside the bearing ball. They said add more washers as needed. These suggestions seemed to help but I won’t know if this solves the problems until I get the wings installed and ailerons fully rigged.

Vern Smith (#324 tail cone attachment)


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel R.
Sent: Friday, May 11, 2007 6:22 AM
To: rv10-list(at)matronics.com
Subject: RE: Aileron torque tube help


Do you have both Aileron's on, and have verified full travel with both? They act as stops for each other and it might be rubbing now, and not when both are hooked up. Once you have both hooked up, you can relieve some of the distance with a file, just be careful not to scratch the paint...ask me how I know that painting and saving the finish is way too hard.
Dan
N289DT RV10E


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of The McGough Family
Sent: Friday, May 11, 2007 12:57 AM
To: rv10-list(at)matronics.com
Subject: Aileron torque tube help
My Aileron torque tube rubs on the W-1013 which is the braket that is riveted to the rear wing spar that holds the Aileron on. Only in the downward position. Anyone else had that problem?



Chris
Quote:
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-Listhref="http://forums.matronics.com">http://forums.matronics.com
[/b]http://www.matronics.com/Navigator?RV10-List
Quote:
[b]
http://forums.matronics.com[/b] [/quote]0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
0
Quote:
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
1
Quote:
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
2
Quote:
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
3
Quote:
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
4
Quote:
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
5
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group