Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rivets

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

klr12(at)psu.edu
Guest

Posted: Thu May 24, 2007 4:13 am Post subject: Rivets

Guys,

 Can anybody tell me the length of the dash 5 rivets used in the spar? I 

have been tasked with ordering them and my plans are at my son's house 

200 mi. away.

                                                                                                                       

Thanks

                                                                                                                        

Kevin

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

DaveG601XL

Joined: 27 Oct 2006
Posts: 351
Location: Cincinnati, Oh

Posted: Thu May 24, 2007 4:24 am Post subject: Re: Rivets

I have attached the rivet spec from Avex.



Good luck,

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Avex Rivets Spec.pdf

Description:

Download

Filename:

Avex Rivets Spec.pdf

Filesize:

33.9 KB

Downloaded:

348 Time(s)

_________________
David Gallagher
Cincinnati, OH area

klr12(at)psu.edu
Guest

Posted: Thu May 24, 2007 5:33 am Post subject: Rivets

Thanks Dave but I need the size of the solid AN470's used in the spar 

caps. I've already got my Avex rivets but neglected to get the solid rivets.

                                                                                                  

Kevin

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

DaveG601XL

Joined: 27 Oct 2006
Posts: 351
Location: Cincinnati, Oh

Posted: Thu May 24, 2007 6:18 am Post subject: Re: Rivets

DUH!  I should have read your note better.



Per the drawing 6-W-3 Dated 04/05, I see the following:



Spar Cap & Doubler (top and bottom) AN470-AD-6-14, 142 required

Top and bottom between stiffeners AN470-AD-5-9, 144 required

Top and bottom through hat stiffeners AN470-AD-5-10, 32 required

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
David Gallagher
Cincinnati, OH area

lwinger

Joined: 21 Jun 2006
Posts: 229
Location: Tustin, CA

Posted: Thu May 24, 2007 6:25 am Post subject: Rivets

Kevin,

  

 In the example of a rivet marked AN-470-AD-5-9, here is the code.

  

 AN = Army Navy

 470 = Head type

 AD = Material type (in this case 2117 T4)

 5 = Shank diameter in 32nds of an inch (in this case 5/32nds diameter)

 9 = Length in 16ths of an inch (in this case 9/16ths length)

  

 In the case of a 470 universal head, which we use, the length is measured from the end of the shank to the base of the head.

  

 For the record, page 27 of the new Zenith Construction Standards manual (a very helpful document, by the way) has the length and diameter reversed in their example at the top of the page.

  

 Larry Winger

 Tustin, CA

 601XL/Corvair

 

 

 On 5/24/07, Kevin L. Rupert <klr12(at)psu.edu (klr12(at)psu.edu)> wrote: [quote]--> Zenith-List message posted by: "Kevin L. Rupert" <klr12(at)psu.edu 



[b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Larry Winger
Tustin, CA
Plans building 601XL/650 with Corvair
Installing fuel system
www.mykitlog.com/lwinger

lwinger

Joined: 21 Jun 2006
Posts: 229
Location: Tustin, CA

Posted: Thu May 24, 2007 6:34 am Post subject: Rivets

Kevin,

  

 One last thing.  Here is the link to the Aircraft Spruce online catalog page for solid rivets.

  

 http://www.aircraftspruce.com/catalog/hapages/solidalumrivets.php

  

 Larry Winger

 Tustin, CA

 Scratch building 601XL/Corvair

Control surfaces complete/2nd wing spar 80% done

 

 

 On 5/24/07, Kevin L. Rupert <klr12(at)psu.edu (klr12(at)psu.edu)> wrote: [quote]--> Zenith-List message posted by: "Kevin L. Rupert" <klr12(at)psu.edu 



[b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Larry Winger
Tustin, CA
Plans building 601XL/650 with Corvair
Installing fuel system
www.mykitlog.com/lwinger

klr12(at)psu.edu
Guest

Posted: Thu May 24, 2007 7:15 am Post subject: Rivets

Thanks All,

 I have what I need and the rivets are ordered.

                                                          Kevin

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

planecrazydld(at)yahoo.co
Guest

Posted: Thu May 24, 2007 12:36 pm Post subject: Rivets

Got a little couch potato? 

 Check out fun [url=http://us.rd.yahoo.com/evt=48248/*http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz]summer activities for kids.[/url] [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum