Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wiring issues

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

rlnelson5

Joined: 10 Feb 2006
Posts: 8
Location: Inver grove Hgts Minnesota

Posted: Sat Feb 11, 2006 9:05 pm Post subject: Wiring issues

Hello 

 Redoing my lower dash panel.



  1  I have a Whalen strobe powerpack that can handle either 1,2,3 or 4 strobes. It is  14v 7a unit . I have 2 wingtip , 1 tail and 1 red strobe/ beacon.



 My question is if I could use a [ 2-10 ?] switch to control this strobe power unit and have the red beacon turn on the middle switch position  and then add the other 3 strobes at the top switch position?

 If that would not do it is there some other arrangment to do it?    



2 I have the B + C instrament lighting dimmer setup .

  I have Inst. lights, couple of post lights  Radio lights ,Lower dash panel lights , and 2 over the shoulder lights. I have a  cabin ovhd light as well.

 

 I am using Fiber light  units on most instraments and on the lower dash. The lower dash units  are a long fiber optic strip that has lettering on them to label the lower dash panel items. 



 How should I handle this whole setup?

  I only have one dimmer pot . 

Do I need some type of rotary switch?

 Regular switches or wire the ovhd to a seperate switch?  ? wire them all together? 



Any ideas would be helfull



 thanks  l

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Bret Smith

Joined: 09 Jan 2006
Posts: 178
Location: Mineral Bluff, GA

Posted: Sat Feb 11, 2006 9:47 pm Post subject: Wiring issues

"The lower dash units  are a long fiber optic strip that has lettering on

them to label the lower dash panel items."



Do you have a picture of this?  Manufacturer?

Bret Smith

RV-9A (91314)

Mineral Bluff, GA

www.FlightInnovations.com



--

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Bret Smith
RV-9A (Emp)

rlnelson5

Joined: 10 Feb 2006
Posts: 8
Location: Inver grove Hgts Minnesota

Posted: Sat Feb 11, 2006 10:01 pm Post subject: Re: Wiring issues

Sure  , look in the Aircraft Spruce catalog. Made by Fiberlite. I have the 2004-5 version , on page 423 . It is called Illuminated Labeling

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum