Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

was Re: Re: autopilot install- now which one?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
rv10builder(at)verizon.ne
Guest





PostPosted: Wed Aug 29, 2007 4:29 pm    Post subject: was Re: Re: autopilot install- now which one? Reply with quote

As always, thanks for the insight Tim. Want simple; tried and true, will go
with Trutrak the problem is do I spend $2350 for a top notch servo to fit
the RV-10ap, and sorcerer or will the simple $1000 cut it.. that is my
dilemma.
So survey here (for everyone):
which AP version was bought and would get/recommend (trutrak only) based on
flying the RV-10.
Is the Van's Aileron trim equal to the Aerotrim Jesse keeps suggesting?
either one work better in one way.. etc.

Thanks!
Pascal

---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Deems Davis



Joined: 09 Jan 2006
Posts: 925

PostPosted: Wed Aug 29, 2007 5:03 pm    Post subject: was Re: Re: autopilot install- now which one? Reply with quote

Pascal, I may be wrong, as I'm electron challenged, but I believe that
the Tru Trak AP requires their servos, not sure they will work with
others. IIRC TT either updated their servo or recommmended one of their
larger servo's for the -10.

I went with the Digiflight VSVG , with vertical steering from the OP (in
development but not yet available) I can fly WAAS overlay approaches and
will not require the ILS from the Sorcerer. (At least that's what my
reasoning has been to this point :-\ ).

Deems Davis # 406
'Its all done....Its just not put together'
http://deemsrv10.com/

pascal wrote:
Quote:


As always, thanks for the insight Tim. Want simple; tried and true,
will go with Trutrak the problem is do I spend $2350 for a top notch
servo to fit the RV-10ap, and sorcerer or will the simple $1000 cut
it.. that is my dilemma.
So survey here (for everyone):
which AP version was bought and would get/recommend (trutrak only)
based on flying the RV-10.
Is the Van's Aileron trim equal to the Aerotrim Jesse keeps
suggesting? either one work better in one way.. etc.

Thanks!


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
LloydDR(at)wernerco.com
Guest





PostPosted: Thu Aug 30, 2007 5:25 am    Post subject: was Re: Re: autopilot install- now which one? Reply with quote

I have the Sorcerer, will be adding Yaw to it, and I have Van's Aileron
trim. Both packages are nice and simple to install, and can both be done
after the fact, because I did it that way because the wings went to
paint early. But, and let me stress this but, I am in total agreement
with Tim that it is much easier to do it before the wings are on. There
is safety wire and several other things that need to be done that are
much easier when looking at it in the wing cradle, rather than trying to
reach up from a crawler on the floor. The next one I do will have
everything done in the wings before they are attached.
Dan
N289DT RV10E Flying

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rv10builder(at)verizon.ne
Guest





PostPosted: Thu Aug 30, 2007 8:43 am    Post subject: was Re: Re: autopilot install- now which one? Reply with quote

Thank you to those who responded with feedback. I called TT this morning and
discovered that regardless of which AP I decide to go with I (as does anyone
with a -10) need the servo specific to the RV-10 ($2350) as it includes the
Torque enhancer that the other servos don't need.
So I now know I need to get the AP servo while building and I appear to have
one choice on the servo anyway.
Again thanks for the guidance.
Pascal
40720 Wings shipped!
---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Tim Olson



Joined: 25 Jan 2007
Posts: 2879

PostPosted: Thu Aug 30, 2007 9:00 am    Post subject: was Re: Re: autopilot install- now which one? Reply with quote

That's a pair, right? I mean, the whole DFIIVSGV autopilot is
under $5K.

Tim Olson - RV-10 N104CD - Flying
do not archive
pascal wrote:
[quote]

Thank you to those who responded with feedback. I called TT this morning
and discovered that regardless of which AP I decide to go with I (as
does anyone with a -10) need the servo specific to the RV-10 ($2350) as
it includes the Torque enhancer that the other servos don't need.
So I now know I need to get the AP servo while building and I appear to
have one choice on the servo anyway.
Again thanks for the guidance.
Pascal
40720 Wings shipped!
---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
LloydDR(at)wernerco.com
Guest





PostPosted: Thu Aug 30, 2007 9:25 am    Post subject: was Re: Re: autopilot install- now which one? Reply with quote

I remember it being around $2k for the servo's and the remainder was
based on what APhead you bought
Dan
--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group