Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wingtip lens
Goto page Previous 1, 2

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Tim Olson

Joined: 25 Jan 2007
Posts: 2879

Posted: Wed Aug 29, 2007 6:18 pm Post subject: Wingtip lens

Amazing what photoshop can do. 



Tim Olson - RV-10 N104CD - Flying

do not archive

Robin Marks wrote:

 	  Quote: 	
		   I also thought we needed a few more screws:

 

 That should do it!

 

 Robin

 

 wingtip.jpg

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Wed Aug 29, 2007 6:21 pm Post subject: Wingtip lens

It's mine and all it is is silver rattle can paint applied from the 

inside of the lens. Jeff Bordelon (my LED nav/strobe lite guy) did this 

to his plane and I shamelessly copied it!

Deems

David Maib wrote:

 	  Quote: 	

 That really looks great, Deems. Is that your airplane? What is the material that is covering the nut plates?

 David

 On Wednesday, August 29, 2007, at 05:53PM, "Deems Davis" <deemsdavis(at)cox.net> wrote:

> 

>

> Here's another idea that 'hides' the nut plates and I think gives a bit 

> of decoration.

>

> http://deemsrv10.com/album/LED%20Nav%20&%20Strobes/slides/DSC02219.html

>

> Deems Davis # 406

> 'Its all done....Its just not put together'

> http://deemsrv10.com/

>

>     

>>   

>>       

>

>

dmaib@me.com

Joined: 25 Apr 2006
Posts: 455
Location: New Smyrna Beach, Florida

Posted: Wed Aug 29, 2007 7:02 pm Post subject: Wingtip lens

And I shall shamelessly copy both of you! ^_^



David

 

On Wednesday, August 29, 2007, at 09:27PM, "Deems Davis" <deemsdavis(at)cox.net> wrote:

 	  Quote: 	
		  



It's mine and all it is is silver rattle can paint applied from the 

inside of the lens. Jeff Bordelon (my LED nav/strobe lite guy) did this 

to his plane and I shamelessly copied it!



Deems



David Maib wrote:

> 

>

> That really looks great, Deems. Is that your airplane? What is the material that is covering the nut plates?

>

> David

>  

> On Wednesday, August 29, 2007, at 05:53PM, "Deems Davis" <deemsdavis(at)cox.net> wrote:

>   

>> 

>>

>> Here's another idea that 'hides' the nut plates and I think gives a bit 

>> of decoration.

>>

>> http://deemsrv10.com/album/LED%20Nav%20&%20Strobes/slides/DSC02219.html

>>

>> Deems Davis # 406

>> 'Its all done....Its just not put together'

>> http://deemsrv10.com/

>>

>>     

>>>   

>>>       

>>

>>

>>

>>

>>

>>     

>

_________________
David Maib
RV-10 #40559
New Smyrna Beach, FL

dmaib@me.com

Joined: 25 Apr 2006
Posts: 455
Location: New Smyrna Beach, Florida

Posted: Wed Aug 29, 2007 7:03 pm Post subject: Wingtip lens

Now that looks like a "nuclear hardened" wingtip lens!



David



 

On Wednesday, August 29, 2007, at 09:00PM, "Robin Marks" <robin1(at)mrmoisture.com> wrote:

 	  Quote: 	
		  I also thought we needed a few more screws:



That should do it!



Robin

_________________
David Maib
RV-10 #40559
New Smyrna Beach, FL

coop85(at)cableone.net
Guest

Posted: Wed Aug 29, 2007 7:36 pm Post subject: Wingtip lens

Same thoughts as Scott.  I have 194 hours with multiple runs a high speed with no issues on just 2 screws, but a few extra might provide some peace of mind.  

   

Marcus  

40286  

         

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Scott Schmidt

 Sent: Wednesday, August 29, 2007 3:53 PM

 To: rv10-list(at)matronics.com

 Subject: Re: Wingtip lens  

  

       

Just to be the different one, I used only two screws and I have a great fit and so far I've had no problems.    

    

I've flown near the Vne 200 kts TAS and no problems.  Adding more screws makes sense though.    

    

It is not like you take the lens on and off very often and it doesn't hurt.   

    

So those of you with 2 screws, don't get too nervous.  It will work great and you will be able to care a couple more   

    

dimes in your pockets at gross.   

    

   

  

Scott Schmidt

 scottmschmidt(at)yahoo.com     

   

  

   	  Quote: 	
		    http://www.matronics.com/Navigator?RV10-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4

        [quote][b]

glastar(at)gmx.net
Guest

Posted: Wed Aug 29, 2007 9:37 pm Post subject: Wingtip lens

Nice photoshop try, but you would need to colour around rivets and 

screws a bit better 



Werner



Robin Marks wrote:

 	  Quote: 	
		  

 I also thought we needed a few more screws:



 That should do it!



 Robin



 wingtip.jpg

LloydDR(at)wernerco.com
Guest

Posted: Thu Aug 30, 2007 5:45 am Post subject: Wingtip lens

And I copied yours! But used blue instead so they match my paint stripe

out there...we all copy the good ideas, and Deems has allot of them and

freely shares. 

The RV community is great about that, each of us trying to build a

better mousetrap and sharing that info with others!

Dan 

N289DT RV10E 



--

robin1(at)mrmoisture.com
Guest

Posted: Thu Aug 30, 2007 8:02 am Post subject: Wingtip lens

I was just goofing around at my second home on a laptop with only the

touchpad and very limited time before flying out ahead of some

thunderstorms. Next time I email a Twin RV-10 I will take greater care

in cleaning up the photo.



Robin

Do Not Archive

ddnebert

Joined: 14 Jun 2007
Posts: 17

Posted: Thu Aug 30, 2007 6:23 pm Post subject: Re: Wingtip lens - strobe light lens

 	  Deems Davis wrote: 	
		  It's mine and all it is is silver rattle can paint applied from the 

inside of the lens. Jeff Bordelon (my LED nav/strobe lite guy) did this 

to his plane and I shamelessly copied it!



Deems



	




I see you do not have a glass globe on your strobe. Is this not something to worry about?



Doug Nebert

Builder # 40546 - in the wings

_________________
RV-10 Builder #40546
Tail mostly done, wings complete, end of SB fuse, working on doors and fiberglass

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Thu Aug 30, 2007 7:06 pm Post subject: Wingtip lens

It's not something I'm worrying about at the present. What is the hazard 

and related consequence that would be avoided with a glass cover? I'm 

not trying to be smart, I really don't know. The strobe is 'protected' 

from direct moisture by virtue of the plexi.

Deems Davis # 406

'Its all done....Its just not put together'

http://deemsrv10.com/

ddnebert wrote:

 	  Quote: 	

 Deems Davis wrote:

> It's mine and all it is is silver rattle can paint applied from the 

> inside of the lens. Jeff Bordelon (my LED nav/strobe lite guy) did this 

> to his plane and I shamelessly copied it!

>

> Deems

>     

 I see you do not have a glass globe on your strobe. Is this not something to worry about?

 Doug Nebert

 Builder # 40546 - in the wings

 --------

 RV-10 Builder #40546

 Read this topic online here:

 http://forums.matronics.com/viewtopic.php?p=131953#131953

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours Goto page Previous 1, 2
Page 2 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum