 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
johnd(at)data-tech.com Guest
|
Posted: Fri Sep 07, 2007 1:16 pm Post subject: Swapping fittings on Grove Brakes |
|
|
Hi All,
I've sent an email to grove asking this question but havent heard yet so
I thought I would ask here.
I've got a 601XL QB kit and the way the brake mechanisms are installed I
would like to swap the Bleed fitting with the 90 degree one so the brake
line will route better.
Anyone see any problem with swapping those fittings ?
Thanks,
John Davis
Burnsville, NC
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
 |
dredmoody(at)cox.net Guest
|
Posted: Sat Sep 08, 2007 8:16 am Post subject: Swapping fittings on Grove Brakes |
|
|
I see no reason why the shape of the fitting would be a problem John. If a right angle fitting works better for you, it should be okay. I made choices for similar reasons at the master cylinders and the parking brake valve myself.
Dred
[quote] ---
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
 |
psm(at)ATT.NET Guest
|
Posted: Sat Sep 08, 2007 1:09 pm Post subject: Swapping fittings on Grove Brakes |
|
|
Hi John,
The instructions that came with my Grove brakes says you can swap the
fittings. Of course you will want the bleed fitting on the bottom
and the pressure fitting on the top. Any other configuration and you
will have problems bleeding air from the system.
I think you can get the Grove instructions online at their web
site. What you can't get (at least I couldn't) is any response to an
email inquiry.
Paul
XL fuselage
At 02:07 PM 9/7/2007, you wrote:
Quote: |
Hi All,
I've sent an email to grove asking this question but havent heard
yet so I thought I would ask here.
I've got a 601XL QB kit and the way the brake mechanisms are
installed I would like to swap the Bleed fitting with the 90 degree
one so the brake line will route better.
Anyone see any problem with swapping those fittings ?
Thanks,
John Davis
Burnsville, NC
|
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
 |
gbrac80(at)aol.com Guest
|
Posted: Sat Sep 08, 2007 3:38 pm Post subject: Swapping fittings on Grove Brakes |
|
|
Paul,
Did you mean to put the pressure fitting on the bottom and the bleed fitting on top? Air here in the Northern Hemisphere tends to bubble to the top of brake fluid. How does it behave where you are?
Rgds,
Mike.
--
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
 |
psm(at)ATT.NET Guest
|
Posted: Sat Sep 08, 2007 3:51 pm Post subject: Swapping fittings on Grove Brakes |
|
|
Hi Mike,
I admit it may not be intuitive, but the bleed fitting goes at the
lowest point.
The best way to fill the brake system is to pump the fluid in from
the bottom to the top. While the fluid fills the various tubes and
compartments the air is forced upward to the reservoir.
Who woulda guessed ?
Paul
XL fuselage
At 04:36 PM 9/8/2007, you wrote:
Quote: | Paul,
Did you mean to put the pressure fitting on the bottom and the bleed
fitting on top? Air here in the Northern Hemisphere tends to bubble
to the top of brake fluid. How does it behave where you are?
Rgds,
Mike.
|
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|