 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
bertrv6(at)gmail.com Guest
|
Posted: Sat Oct 13, 2007 5:55 pm Post subject: Alectrical failure, Contro Vision Unit |
|
|
Hi:
Question for those with the EXp2Bus, from Control Vision.
I have a total Electrical Failure today, I was around the pattern,
two minutes
or so in to the flight, when everything went blank...
After I landed, I thought would reset, but it never did... back at the hangar,
check my two small bus bars, I have, nothing..
Remove unit, and check the Bat. connection, with master Switch on, of course,
nothing...
So I guess I will have to sent unit back to Control Vision, for repair..?
Any one had ever had this experience, and what was the cause? Any one has
suggestions before I sent it back..? Battery is Good.... I know.....
Thanks,
Bertrv6a
Do not archive
| - The Matronics RVSouthEast-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RVSouthEast-List |
|
|
|
Back to top |
|
 |
ronh4244(at)mchsi.com Guest
|
Posted: Sat Oct 13, 2007 6:43 pm Post subject: Alectrical failure, Contro Vision Unit |
|
|
I have the EXp2Bus and have not had any problems in just over two years. One
thing you may try is remove the battery ables, this will remove all power
from the unit. After a minute or so reconnect. I have had problems with my
Dynon unit and it will reset when I do this. Don't know if this will work on
the EXp but it has to easier than removing EXp.
Ron H.
N362TS
---
| - The Matronics RVSouthEast-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RVSouthEast-List |
|
|
|
Back to top |
|
 |
jclarkmail(at)gmail.com Guest
|
Posted: Sat Oct 13, 2007 8:12 pm Post subject: Alectrical failure, Contro Vision Unit |
|
|
Hmmm.
About 1000 hours so far and no such problem.
Are you using their "40 amp on board relay"? Or did you wire it with an external contactor?
(Actually after reading the message again, it seems you are using their relay.)
If you are using theirs, is the board mounted horizontally or vertically? May sure that relay is working fine.
James
On 10/13/07, Bert Murillo <bertrv6(at)gmail.com (bertrv6(at)gmail.com)> wrote:[quote]--> RVSouthEast-List message posted by: "Bert Murillo" < bertrv6(at)gmail.com (bertrv6(at)gmail.com)>
Hi:
Question for those with the EXp2Bus, from Control Vision.
I have a total Electrical Failure today, I was around the pattern,
two minutes
or so in to the flight, when everything went blank...
After I landed, I thought would reset, but it never did... back at the hangar,
check my two small bus bars, I have, nothing..
Remove unit, and check the Bat. connection, with master Switch on, of course,
nothing...
So I guess I will have to sent unit back to Control Vision, for repair..?
Any one had ever had this experience, and what was the cause? Any one has
suggestions before I sent it back..? Battery is Good.... I know..... james(at)nextupventures.com (james(at)nextupventures.com) .
[quote][b]
| - The Matronics RVSouthEast-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RVSouthEast-List |
|
|
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|