Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

pitot tube group buy

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

evmeg(at)snowcrest.net
Guest

Posted: Tue Feb 21, 2006 6:51 am Post subject: pitot tube group buy

Ok fellow builders, I have had several inquiries about whether or not I would discount my pitot tube kits for a group buy. Since I am currently participating in the Hooker harness group buy I can hardly say no. So heres the deal...I will discount the kit by 25% for a group buy of 10 or more, limited to the stock on hand. Anybody interested should just call or email me directly and add your name to the list. As soon as I hit the 10 mark I will ship them out. Those interested can have a look at the kits at the following link:

http://www.evansaviationproducts.com/Other%20Products.htm



Cheers...

Evan Johnson

www.evansaviationproducts.com

(530) 351-1776 cell

bo124rs(at)hotmail.com
Guest

Posted: Tue Feb 21, 2006 12:32 pm Post subject: pitot tube group buy

Can I install your kit post wing construction?



Dana Overall

Richmond, KY i39

RV-7 slider, Imron black, "Black Magic"

do not archive

dan(at)rdan.com
Guest

Posted: Tue Feb 21, 2006 2:43 pm Post subject: pitot tube group buy

Similar question,,

  Can I install it in a Quick build wing ??

  mine will be here in  few weeks

  Thanks,

  Dan

  



Dana Overall <bo124rs(at)hotmail.com> wrote:

  



Can I install your kit post wing construction?



Dana Overall

Richmond, KY i39

RV-7 slider, Imron black, "Black Magic"

do not archive

evmeg(at)snowcrest.net
Guest

Posted: Tue Feb 21, 2006 7:14 pm Post subject: pitot tube group buy

Sure, no problem. If the bottom skins are not in place it will not be a big

challenge. Even if they are it has been done a few times. The only difficult

part would be if the standard pitot location has been drilled...then you

have a hole to fill. The quick build should not have this drilled out. The

issue is that you do not want to have a pitot line interfering with the

aileron bellcrank. The pitot per plans is in the same bay as the

bellcrank....any other option needs to be moved. If you are not sure about

your wing then please give me a call or email so we can work it out.

Cheers.....

Evan Johnson

www.evansaviationproducts.com

(530)247-0375

(530)351-1776 cell

---

flyrv6(at)bryantechnology
Guest

Posted: Tue Feb 21, 2006 7:14 pm Post subject: pitot tube group buy

Doesn't the quick build wing have one skin still off?  It used to be that

way.  If one is off, you should be able to put in this pitot tube easy

enough.

Tim 

 

----

evmeg(at)snowcrest.net
Guest

Posted: Tue Feb 21, 2006 7:44 pm Post subject: pitot tube group buy

Sure, no problem. If the bottom skins are not in place it will not be a big

challenge. Even if they are it has been done a few times. The only difficult

part would be if the standard pitot location has been drilled...then you

have a hole to fill. The quick build should not have this drilled out. The

issue is that you do not want to have a pitot line interfering with the

aileron bellcrank. The pitot per plans is in the same bay as the

bellcrank....any other option needs to be moved. If you are not sure about

your wing then please give me a call or email so we can work it out.

Cheers.....

Evan Johnson

www.evansaviationproducts.com

(530)247-0375

(530)351-1776 cell



---

evmeg(at)snowcrest.net
Guest

Posted: Wed Feb 22, 2006 6:50 am Post subject: pitot tube group buy

Hi Dana, thanks for the inquiry. It is a bit more of a challenge on a

finished wing but of course it can be done. The stiffener plate that goes

inside the wing captures several of the rivets along the spar flange so you

would have to drill those out. Also the pitot needs to be moved one bay

outboard from the aileron bellcrank, so you either have to replace your line

in the wing or splice in a length. Personally I would just re-run the

tubing....its cheap enough. If you are interested forward me your mailing

address and I will get a kit out to you. We already have enough interest to

make the group buy work. In any case if you get the kit and decide you are

not up for the job, just return it. I'm easy that way and you will only be

out shipping.

Evan





---

william(at)gbta.net
Guest

Posted: Wed Feb 22, 2006 4:13 pm Post subject: pitot tube group buy

Wish you had a heated version.



Bill

---

evmeg(at)snowcrest.net
Guest

Posted: Thu Feb 23, 2006 7:38 am Post subject: pitot tube group buy

Hi Bill, I was working on a CNC milled version of a cessna heated tube but

kind of put the project on hold. A couple of others came available so I was

not sure there would be enough interest. My target price for the tube and

the mount with all of the hardware is around $350....I guess I should finish

my work up and see.

Evan Johnson

www.evansaviationproducts.com

(530)247-0375

(530)351-1776 cell

---

william(at)gbta.net
Guest

Posted: Thu Feb 23, 2006 3:03 pm Post subject: pitot tube group buy

Would definitely be interested if you can finalize them.



Bill



---

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum