Matronics Email Lists :: View topic - Wiring diagram needed for homebuilt

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wiring diagram needed for homebuilt

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

dstroud(at)storm.ca
Guest

Posted: Sat Dec 08, 2007 11:56 am Post subject: Wiring diagram needed for homebuilt

Lad...I'm getting short on time building this Fairchild project 

and to be honest, I just don't want to  put the time into developing

a wiring system / diagram for my project. I'm going thru enough

learning curves as it is. Blasphemy to some you may say...but is

there anyone on the list that might be willing to build me up a 

wiring system for a price? The system is relatively simple...air 

start solenoid for starter, one 70 amp alt, 28 volts with two 

step down converters for a few 14 volt requirements, some 

VFR only instruments, strobe and position lights etc. 

If interested, please advise off list  to   dstroud(at)storm.ca

Thanks..



David Stroud   Ottawa, Canada

C-FDWS  Christavia 

Fairchild 51 under construction

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)cox.net
Guest

Posted: Sat Dec 08, 2007 3:10 pm Post subject: Wiring diagram needed for homebuilt

At 02:53 PM 12/8/2007 -0500, you wrote:



 	  Quote: 	
		  



Lad...I'm getting short on time building this Fairchild project

and to be honest, I just don't want to  put the time into developing

a wiring system / diagram for my project. I'm going thru enough

learning curves as it is. Blasphemy to some you may say...but is

there anyone on the list that might be willing to build me up a

wiring system for a price? The system is relatively simple...air

start solenoid for starter, one 70 amp alt, 28 volts with two

step down converters for a few 14 volt requirements, some

VFR only instruments, strobe and position lights etc.

If interested, please advise off list  to   dstroud(at)storm.ca

Thanks..



David Stroud   Ottawa, Canada

C-FDWS  Christavia

Fairchild 51 under construction


	


  Sorry. I've got about 300% more consulting tasks than I'd

  planned to take on when I 'retired' last July. Have

  you looked at Figure Z-11 in:



http://aeroelectric.com/articles/Rev11/AppZ_R11K.pdf



   Except for deciding which devices feed from

   which busses, this drawing should get you a good

   start.



   Bob . . .



        ----------------------------------------)

        ( . . .  a long habit of not thinking   )

        ( a thing wrong, gives it a superficial )

        ( appearance of being right . . .       )

        (                                       )

        (                  -Thomas Paine 1776-  )

        ----------------------------------------

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)cox.net
Guest

Posted: Sun Dec 09, 2007 9:38 am Post subject: Wiring diagram needed for homebuilt

David,



It occurs to me that there are any number of folks on the List

with the skills and perhaps the willingness to assist you. I will

suggest that anyone who would like to join David in getting his

project off the ground might write to him and negotiate. Keep

in mind that the data only needs to be clearly stated which

does NOT require tools like AutoCAD. The task would certainly

be easier if a reference designator list and bill of materials

were crafted in Excel.



Bottom line folks is that here's a free-market opportunity

for someone. What do you have to offer David that he is willing

to pay for where the outcome of the experience is pleasant

for both of you?



Further, consider that the materials you deliver need not be

the work product of you alone. I would hope that folks here

on the List are just as willing to help find answers to

your questions whether the end product goes on YOUR airplane

or somebody else's. I know I am.



Bob . . .

 	  Quote: 	
		  >

>

>Lad...I'm getting short on time building this Fairchild project

>and to be honest, I just don't want to  put the time into developing

>a wiring system / diagram for my project. I'm going thru enough

>learning curves as it is. Blasphemy to some you may say...but is

>there anyone on the list that might be willing to build me up a

>wiring system for a price? The system is relatively simple...air

>start solenoid for starter, one 70 amp alt, 28 volts with two

>step down converters for a few 14 volt requirements, some

>VFR only instruments, strobe and position lights etc.

>If interested, please advise off list  to   dstroud(at)storm.ca

>Thanks..

>

>David Stroud   Ottawa, Canada

>C-FDWS  Christavia

>Fairchild 51 under construction

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum