Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

2 comms 1 antenna

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
gregory.scott1(at)virgin.
Guest





PostPosted: Mon Dec 17, 2007 7:00 am    Post subject: 2 comms 1 antenna Reply with quote

Hi,
A newcomer to this list so forgive me if this question(or similar) has been posed before. I am building an RV9 with 2 comm radio's, a Microair M760 with an ICOM A210 and both thru a PM3000 Intercom. My plan is to have a single Antenna and use a 4 pole 2 way switch, 3 poles to switch the audio and the 3rd. to control a 50 Ohm Coax switching relay to connect the antenna. Any forseen problems with this? if so should I use 2 Antenna? this I thought would risk damage to the receiver input of the non transmitting Comm.
Greg Scott
RV4 G - RVIV
U.K.
[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)cox.net
Guest





PostPosted: Tue Dec 18, 2007 7:08 am    Post subject: 2 comms 1 antenna Reply with quote

At 02:56 PM 12/17/2007 +0000, you wrote:

Quote:
Hi,
A newcomer to this list so forgive me if this question(or similar) has
been posed before. I am building an RV9 with 2 comm radio's, a Microair
M760 with an ICOM A210 and both thru a PM3000 Intercom. My plan is to
have a single Antenna and use a 4 pole 2 way switch, 3 poles to switch the
audio and the 3rd. to control a 50 Ohm Coax switching relay to connect the
antenna. Any forseen problems with this? if so should I use 2 Antenna?
this I thought would risk damage to the receiver input of the non
transmitting Comm.

Most schemes to avoid dual antennas are
either cumbersome or hazardous to the
radios. Suggest you plan on dual antennas.

There's been a lot of discussion about
this on the List. You can search the archives
at:

http://www.matronics.com/searching/ws_script.cgi

Search the AeroElectric list for the word
"duplexer"

Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group